|
|
AC SERVO DRIVE
15 to 300 A
1 x 230 V AC - 3x 400 V AC
- Analog input : 6 control modes (Position, Speed, Torque, 3 switching modes)
Easy operation
- I/O Input (254 positions)
- Field Bus interface: CANopen, Sercos, serial bus (GA1060/RS485)
DC SERVO DRIVE
20 to 30 A
50 V DC & 140 V DC
|
|
For nearly two decades, the name Moog has been synonymous with high performance brushless servomotors and servodrives offering the highest dynamic performance, power density and reliability. We are committed to offering a full range of products as well as custom solutions and systems expertise.
Moog's servomotors and servodrives are rugged for long service life and when you need repairs, ask for Moog Authentic Repair Services.
|
|
|
|
|
|
DIGITAX ST SERVO DRIVE - 1.1 to 8 A
Servomotor control
- Three versions :
DIGITAX ST-BASE
DIGITAX ST-INDEXER
DIGITAX ST-PLUS
- Main supply :
Single or three phases 230V : 1.1 up to 4.7 A
Three Phases 400V : 1.5 up to 8 A
DIGITAX ST drives satisfy the requirements of the modern automation environments in the world of Servo Process application drive systems. They offer users maximum ease of use.
DIGITAX ST drives allow transient cycles with an exceptional dynamic response. They can handle very high peak torques, up to 300% of Tn.
The universal encoder input can be used to control incremental, SinCos, Hiperface, EnDAT and SSI encoders. DIGITAX ST’s embedded intelligence saves on having an external automated management system, while simplifying the installation.
Commissioning is quick and easy, with a choice of parameter-setting mode via a removable keypad, a Smartcard, or a CTSoft software.
The CTscope software, a 4-channel real-time oscilloscope, can be used to display, analyse and save application data.
Standard application programs, that can be integrated in the drives, are available: position control, cam, indexing, synchronisation between axes.
Option modules provide connectivity to all standard industry fieldbuses: EtherCAT, Ethernet IP, Ethernet TCP/IP, SERCOS, CANopen, Profibus, DeviceNet, Interbus.
|
|
|
High-speed accuracy with user friendly set-up and diagnostics. State-of-the-art DSP controlled digital vector commutation optimizes bus voltage for improved speed/torque curves. Flux vector current control improves motor efficiency by providing more torque over the full speed range than is possible with traditional sine drives. Available in 10, 20 or 30 Amp peak ratings (3 sec). Convenient pluggable screw terminal connectors for fast, easy set-up and installation. Set-up software employs a straightforward "control-panel" approach, making it easy to get up and running fast.
|
|
The servo amplifier series ECOVARIO covers a peak power range between 1.4 kW and 7.0 kW. ECOVARIO is suitable for operation of 2- or 3-phase synchronous servo motors, DC motors and EC motors. ECOVARIO offers a large variety of interfaces and functionality. Standardized field bus options such as EtherCAT, CANopen (also interpolated), or Profibus DP ensure a fast system integration. Customer specific enhancements are possible.
New: 2-axes servo amplifier ECOVARIO MiniDual, the cost-optimized PCB solution with a peak power of 2 x 0.45 kW.
|
|
|
|
|
|
IPS210 Intelligent DC / Step Minidrive (2x12 W)
IPS110 Intelligent Control Plug-in Module (25 W)
Embed motion control, drive and PLC functionalities in small units (25 x 50 x 12 mm - IPS110) and (62 x 42 x 20 mm - IPS210). They are easy to integrate in motion control applications where space is critical. IPS110 is the pluggable version of the IPS210.
The IPS digital drives control DC and step motors up to 25 W (45 V, 0.5 A) with very low inductance, in open or closed loop modes. Operable in different stepper control modes, from open loop to closed loop stepless operation with encoder feedback, the drives work in either single-axis, multi-axis or stand-alone configurations.
Key Features:
- Fully digital 0.5 A stepper / 1 A DC brush amplifiers
- Motion controller, drive and PLC functionalities in one unit
- 5 V logic, 12-45 V motor power supply for IPS110
- 8-24 V logic and motor power supply for IPS210
- Programmable digital inputs/ outputs, analog inputs
- Quadrature encoder
- RS-232 and CAN / CANopen
|
|
|
|
|
|
IBL2401 Intelligent Servo Drive
PIM2401 Intelligent Control Plug-in Module
High-performance digital servo drives with embedded intelligence, specially designed for motion control applications where space is dramatically limited.
Based on the latest MotionChip(TM) DSP technology, IBL2401 is a flexible, cost-effective, compact minidrive that controls motors with powers up to 25W.
PIM2401 is the pluggable version of the IBL2401. The plug-in design reduces the time needed to assemble or replace it.
IBL2401 / PIM2401 hardware structures integrate all the basic motor control functions and motion control functionalities on a single module. A series of I/O signals are available for easy interfacing with the application.
Key Features:
- Suitable for brushless, DC brush and step motors
- Motion controller, drive and PLC functionalities in one unit
- 6-24 V logic and motor power supply
- 1 A continuous, 3 A peak current
- Programmable digital inputs / outputs, analog inputs
- Quadrature encoder, Hall sensors or linear Halls
- RS-232 and CAN / CANopen
- Compact design (60 x 44 x 16 mm) for IBL2401
- Plug-in design (49 x 44 x 14 mm) for PIM2401
|
|
Aerotech manufactures drives for a wide range of industrial automation applications. Our drives power our own servomotors and complement Aerotech motion controllers in applications as diverse as industrial robots, vision systems, assembly machines, machine tools, semiconductor manufacturing equipment, electronic manufacturing, and in a variety of other industrial control solutions. Aerotech drives, controllers, and linear and rotary servomotors are perfectly matched to provide the ideal solution to your motion control application. Aerotech drives are available in PWM and linear output, with from 10 to 150 amps peak current.
|
|
|
|
|
|
JetWeb makes interface-free integration of motion systems possible - from simple point-to-point positioning to complex contouring control system. As a user, you will only need one development environment and one programming language for both the control and motion system, regardless of whether stepper or servo motors are being used. Powerful, high-level instructions for all motion functions simplify programming. An uncomplicated motion user-interface make commissioning and service much easier.
JetMove represents a powerful and compact family of motion systems. Due to interface-free integration into Jetter control systems, the highest possible flexibility and simplicity is achieved. JetMove motion controllers can handle asynchronous drives, synchronous drives and / or linear motors. The drive family covers rated currents ranging from 1.5 A through 70 A.
Depending on the individual field of application, motion systems will have to fulfil the most varied tasks. For these tasks, Jetter AG provides a broad spectrum of motors. For all motors, starting from mini-size motors of 0.03 Nm up to motors of 115 Nm, a complete series of motion packages can be provided.
|
|
|
Trust Automation Linear Servo Amplifiers are designed for a wide range of applications, from heavy Industrial Automation to Semiconductor Processing Equipment, Robotics, Vision Systems, Electronics Assembly and Manufacturing and many more. Linear Amplifiers are ideal for applications that require high bandwidth, high precision and low electrical noise.
|
|
Yaskawa Sigma and LEGEND servo amplifiers have all-digital architecture with 32-bit microprocessor logic, high speed ASIC current-loop control, and IGBT power sections.
All Sigma and LEGEND amplifiers have serial encoder feedback with automatic motor recognition, expansion ports for addition of single-axis controls and network interfaces, separate main and control power connections, scalable encoder retransmission, sine-coded PWM output waveforms, full thermal overload protection of the motor, and UL, CE, and TUV certifications. Where required, Yaskawa amplifiers have built-in regenerative and dynamic brake resistors.
Yaskawa amplifiers are matched with Sigma motors with high-resolution serial encoder feedback to provide low velocity ripple and speed loop bandwidths exceeding 400 hz. These features allow very smoth motion at low speed, higher load-to-rotor inertia rations, and decreased setting time.
|
|
|
This family of 1- to 4-axis 3-phase servo amplifiers supports a wide variety of motor type, power ranges and interfaces. Using Delta Tau controllers with these amplifiers is an easy and cost-effective solution. The customer can put almost any type of motor on the output.
|
|
Modern systems are often designed in such a way that products can be replaced quickly and without complication. If a high degree of response and accuracy are also required, Lenze%u2019s servo drive systems offer the necessary flexibility. Combined drive controller and servo motor packages featuring perfectly matched components provide solutions for a wide variety of requirements. Compared to mechanical and pneumatic solutions, servo technology is not only more responsive and accurate, but also better value for money and more wear resistant.
|
|
Combines high-speed accuracy with user friendly set-up and diagnostics. State-of-the-art DSP controlled digital vector commutation optimizes bus voltage for improved speed/torque curves. Flux vector current control improves motor efficiency by providing more torque over the full speed range than is possible with traditional sine drives. Set-up software employs a straightforward "control-panel" approach.
|
|
|
|
|
|
IDM240 Intelligent Servo Drive (240 W)
IDM640 Intelligent Servo Drive (640 W)
IDM680 Intelligent Servo Drive (640 W)
The IDMs are fully digital high-precision servo drives with embedded intelligence and a built-in 240 W (IDM240) or 640 W (IDM640 and IDM680) power amplifier. Used to control brushless DC, brushless AC (vector control), DC brush, or 2/3-phase stepping motors, these high-performance intelligent servo drives combine motion controller, power amplifier and PLC functionality in a single, compact unit.
The on-board CAN-bus interface allows these drives to be used as the intelligent axis in a distributed-intelligence, multiple-axis network (up to 256 axes).
Key Features:
- Suitable for brushless, DC brush and step motors
- Motion controller, drive and PLC functionalities in one unit
- 12-48 V logic and 48 V (IDM240) / 80 V (IDM640 & IDM680) motor power supply
- 5 A (IDM240) / 8 A (IDM640 & IDM680) continuous, 16 A peak current
- Opto-isolated programmable digital inputs / outputs and analog inputs
- High resolution up to 256 microsteps / full step
- Quadrature or SSI encoder, digital and linear Hall sensors
- Optional resolver, Sin/Cos encoder (IDM680)
- RS-232 or RS-485 and CAN / CANopen
- Compact design: 136 x 95 x 26 mm
|
|
Servo inverters with four different technology variants and matched synchronous and asynchronous servo motors ensure an ideal solution for every application.
9400 Servo Drives :
- power range 0.37 to 370 kW
- 3 x 400 ... 500 V
- HighLine
- high modularity
- drive-based safety
9300 servo inverters :
- Servo inverters in the power range from 0.37 to 75.0 kW;
- 3 x 400/480 V; 4 technology functions: servo inverter; position controller; cam profiler; register controller
|
|
DigiFlex® Performance™ series: Any Control - Any Motor - Any Feedback
This means you the designer can choose the best of breed components for your system. Control, Motor, and Feedback and ADVANCED Motion Controls will fit neatly in the middle.
How can we do this? Under a single platform, the DigiFlex® Performance™ series offers more than 130 variations to meet any need.
DriveWare™ Software
DriveWare™ gives full control of your command scheme, tunig parameters, I/O functionality, troubleshooting and more.
|
|
The Z-Series family of servo drives have been designed to be integrated into your PCB and come in multiple architechtures with features previously found only in larger drives.
The Z-Series is a culmination of recent advances in manufacturing technology. By utilizing dual sided PCB boards, high density power devices and creative design we are able to make the Z-Series possible.
|
|
|
Deciding whether to use a digital drive or an analog drive really depends on what you need the drive to do. If you already have an intelligent controller that can handle events and it has enough I/O then either will work for your system. If your controller has limitations then a digital drive may be able to make up for them.
|
|
Servo Amplifiers
An amplifier is required to power any general purpose drive or servo drive. Depending on the application requirement, CMC offers both general purpose amplifiers and servo amplifiers.
CMC Amplifiers are available with new machinery, in systems and for retrofit.
|
|
|
Two TTL signals control these drives, one for PWM and the other for Direction. Since these drives don't take analog inputs for command the need for a D/A converter for drive control is eliminated.
|
|
Servo Amplifiers : MBL / MBLX
MBL and MBLX Motion Science Series Brushless Amplifiers are cost-effective, high performance motion control solutions in compact packages. Designed for brushless motors up to 850 oz-in (2250 oz-in. peak), they are MOSFET, pulse-width-modulated (pwm) servo amplifiers providing four-quadrant control in torque and velocity modes. They are available in 16 different board-level and housed models (12 - MBL and 4 - MBLX amplifiers). MBL and MBLX Motion Science Series Brushless Servo Amplifiers are ideal for a wide range of applications, including pick-and-place, semiconductor, medical, packaging, inspection, robotics, and factory automation.
|
|
Control Modes Indexer, Point-to-Point, PVT
Camming, Gearing, Position, Velocity, Torque
Command Interface CANopen/DeviceNet
ASCII and discrete I/O
Stepper commands
+/-10V velocity and torque command
PWM velocity and torque command
Master encoder (electronic gearing)
Communications CAN
RS232
Feedback Digital quad A/B encoder
Secondary encoder / emulated encoder out
Analog sin/cos encoder
Resolver (-R version)
Digital Halls
I/O - Digital 12 inputs, 4 outputs
Regen Panel: external resistor dissipation
Micro Panel: internal dissipation
Accessories External regen resisitors
External edge filter
Dimensions Panel: 191 x 140 x 64 mm [7.5 x 5.5 x 2.5 in]
Micro Panel: 126 x 90 x 53 mm [5.0 x 3.5 x 2.1 in]
|
|
The combination of a DigiFlex® Performance™ servo drive with the DriveWare software establishes a new benchmark in versatility! Capabilities built into DigiFlex® servo drives include:
- Full tuning control of all three servo loops: Position, Velocity and Torque
- Real-time oscilloscope with up to 8 channels to ensure that tuning achieves the highest performance
- Status window with over 50 simultaneous channels for drive and system diagnostics
- I/O configuration for over 60 events and signals, configurable to latch/non-latch as well as active-high and active-low
- Universal servo motor compatibility by means of automatic commutation adjustment
- Dual Loop Feedback - Increases both stability and accuracy.
|
|
|
|
|
|
Servo Motors & Drives
The Epsilon Series is the most compact digital servo drive in the Numatics lineup. Designed to fit in cabinets as small as six inches (152mm) deep, with cables attached, Epsilon drives possess rugged quality and reliability. There are three sizes of each Epsilon drive: 2 Amp, 3 Amp and 5 Amp, with the largest drive delivering up to 37 lb-in continuous torque. Each drive contains a 14-segment status display, reset button, removable connectors and utilizes standard %u201CD%u201D type connectors.
Epsilon 120-240V NT Motor Selection The NT motor is a high performance motor utilizing patented technology to maximize torque in a compact package. The NT motor uses powerful Neodymium magnets and manufactured with a segmented core to maximize stator efficiency. The NT motor has a very low inertia for applications that demand high accel and cycle rates. NT motors are available in English (NEMA 23 or 34) flanges, with or without brakes. The standard encoder resolution is 2048 lines per rev. NT motors are supplied with MS style connectors.
|
|
Together with BSH servo motors, Lexium 05 servo drives are compact and dynamic servo drives for machines with various power ranges and diverse supply voltages.
Lexium 05 servo drives:
100…120 V single phase, from 0.4 to 1.4 kW
200…240 V single phase, from 0.75 to 2.5 kW
200…240 V 3-phase, from 0.75 to 3.2 kW
380…480 V 3-phase, from 1.4 to 6 kW
BSH servo motor:
Nominal torque: from 0.5 to 36 Nm
Nominal speed: from 1500 to 8000 rpm
|
|
AC Servo DrivesConfigure Product Selector Documents 3D Models
Our AC servo drives are designed to compliment our wide range of rotary and linear three phase brushless servomotors and offer the broadest connectivity available in the global marketplace today. These drives bring you advanced control technology along with compact packaging and simplified commissioning.
Standard models are available from 300 watts to 58 kW continuous with input voltage ranges from 20 VDC to 480 VAC
|
|
Digital servo controller for three-phase synchronous servo motors with permanent magnets.
- Compact devices for mounting in control cabinets
- Integrated safety technology
- Comprehensive technical functions
- High dynamics and quality of control
- Choice of field bus interfaces: Profibus DP, CANopen, EtherCAT
- Analog and digital inputs and outputs
- Integrated mains filter and ballast circuit
- Direct connection to 230 V or 3 x 400/480 V
|
|
|
|
|
|
As the technology of microprocessor unit becomes more advanced and much further, the development and cost effectivity of permanent magnet manufacturing technology for servo motor and high power and high performance semiconductor power devices is improved continuously. Therefore, AC servo motor and AC servo control system have become the basic techniques for accomplishing automation control technology in current industry field.
Delta servo system is an omnibearing integrated servo system which is based on Delta's strength in industrial and electronic technology and developed for different customers' requirements of various application machine tools. All ASDA series servo drives are provided with a superior digital signal processor (DSP) which represents a high-speed performance of the control circuit loop. Besides, the other features of Delta ASDA series, including gain tuning, smooth motor operation and software analysis / monitor function, also provide high-speed and high-precision motion control for a wide range of industrial automation applications.
|
|
Servo/Motion
MELSERVO - Servo technology that does more
Mitsubishi Electric offers a variety of Servo and Motion system products providing solutions for applications as simple as a single axis point-to-point system through to fully synchonised 96 axis systems.
With both standard pulse type output modules and SSCNET bus modules specific application needs are easy to meet.
The Super Series of Servo motors and amplifiers takes Mitsubishi Motion Control to new levels of precision with a wide range of motors (all fitted with a standard 131,072 absolute encoder) and wide amplifier range (up to 55kW).
All Mitsubishi Servo and Motion system hardware is complimented by a range of software packages allowing easy programming and set-up of the units.
|
|
|
|
