|
|
The R256 is a compact step motor driver and controller which is designed as a stand-alone option to the integrated motor/controller. This product offers the user the option to daisy-chain up to 16 of these units to meet multi-axis application demand. In addition, the R256 offers the user the ability to query various existing parameters such as the microstepping resolution, current position as well as the various speed settings. Visit www.LinEngineering.com today!
Features:
2.0 Amp Chopper (PWM) Driver with Controls
Operates from 12 to 40 VDC
Microstep resolution from ½ to 256 microsteps
Two digital I/O's and two fixed inputs
Stand alone operation with no PC
Single 4 wire bus linking up to 16 units
Fully programmable speeds, current, and acceleration
Stores up to 16 different programs (4kbytes of memory)
|
|
|
|
|
|
AB425S: universal control unit machine drives for 1 servo motor and 2 stepping motors
- Control unit for Efka DC1500 or DC1550 motor
- and 2 stepping motors Efka SM200 and SM 250
- or 3. party products up to 60V and 5A phase current
- User customized programming of individual and even complex functional sequences in a higher programming language for specially designed sewing workplaces and sewing automats using Efka C200 compiler
- Synchronous operation of all drives
- X/Y function
- USB port for data storage uploading and downloading
- Updates via USB with email possible
- Flash technology, no EPROM
- Digital parameter setting directly on the control unit
- Programmable light barrier functions
- Integrated tread monitor function
- A range of HMI: Variocontrol V850 und VarioTouch V900
- 29 short-circuit proof outputs
- 28 digital inputs freely programmable
- 2 analog inputs
- 2 digital / analog converter output (0-10V)
- Operating hours counter
- Machine operating time monitoring with optical or acoustic signal for maintenance
- Expandable to other Efka drives via CANefka
|
|
Galil's AMP-19540 is a 4-axis amplifier for driving brush or brushless motors up to 500 Watts. By interfacing directly to Galil's DMC-18x2, DMC-18x0, or DMC-18x6 controllers, it provides a cost-effective controller/drive solution for multi-axis applications. The AMP-19540 contains four transconductance, PWM amplifiers for driving brush or brushless motors. Each amplifier operates at 18V to 80V dc, up to 7 Amps continuous, 10 Amps peak. The AMP-19540 gain setting is easily configured with jumpers. The PWM switching frequency is 60 kHz.
The AMP-19540 enclosure has dimensions of 6.8" x 8.75" x 1". It interfaces to Galil's DMC-18xx PCI bus controller with a single, 100-pin high density SCSI cable. Signals for each axis are brought out through D-type connectors located on the AMP-19540. For applications with less than three axes, the AMP-19520 two-axis model is available. A shunt regulator option is also available.
|
|
Servo Controls
Baldor offer a range of servo drives to cover many different applications. Drive products are available with the universal +/-10V interface through to real-time Ethernet solutions based on the open standard Ethernet Powerlink.
Baldor Servo drives control both rotary and linear AC servo motors, and are avialable from 1A single phase through to 33.5A three phase.
Baldor products help increase productivity, improve quality, work hard - and provide solutions for your application needs.
|
|
|
Drivert-300 is a digital mechanism with PWM system at 6.25 KHz with sinusoidal output current. It provides high performance standards for the control of SPEED, TORQUE and POSITION of synchronous permanent magnet (Brushless) servomotors up to 300 W.
|
|
EBL-H-50-03 Amplifier (Hall Sensor)
Specially engineered for Portescap high performance Brushless motors, the EBL driver is ideal for applications where efficiency, high acceleration or safety features are key. Clearly identified inputs and outputs allow for easy startup.
Flexibility: Fully programmable features allow for maximum performance in each specific application. With a broad supply voltage range, this driver is capable of controlling the smaller 13 mm BLDC motors to the larger 30 mm motors.
Protection: Thermal, short and over current protection are included. An optional feature allows for current limitation at start up to protect surrounding equipment (i.e: the life of a battery pack in a medical respirator will be greatly improved). The internal current ripple control minimizes increases in motor heat.
Electrical Characteristics
Supply Voltage 5.5 - 50 V
Current Output 3 / 12 A
Speed Range 90,000 (2 poles)
|
|
|
All-in-one motion control system. Combines a PLC, a sequential motion controller and AXIOM drive technology. Less space requirements with fewer components to wire and program. Intuitive set-up and configuration software for easy set up. ASCII and Modbus RTU interface.
|
|
Modern Technology in Miniature Format
High efficiency
Unique temperature supervision
|
|
- High Performance at Low Cost
- DC Servo-Motor Controller Supplies up to 30 W
- 20 MHz Encoder Input for High Speed & Resolution
- Macro Programmable Stand-Alone Functionality
- Network Capability for Multi-Axis Applications
- Non-Volatile EEPROM for Macros and Parameters
- Digital I/O Lines (TTL)
- Motor-Brake Control
- USB and RS-232 Interface
- Optional Joystick for Manual Control
- Works with All PI Micropositioners
The latest generation Mercury™ C-863 servo motor controller is even more powerful and versatile than its predecessors. Easy data interchange with laptop or PC is possible via the USB interface. The RS-232 interface provides for easy integration in industrial applications. The compact design with its integrated amplifier makes it ideal for building high-performance, cost-effective micropositioning systems.
|
|
Control electronics for DC and EC motors
1 and 4-quadrant servoamplifiers
Positioning control units
- EPOS P
- EPOS 2
Characteristics
- Matched to maxon motors
- Comprehensive range of cables and accessories available
- Customization if required
|
|
Aerotech manufactures drives for a wide range of industrial automation applications. Our drives power our own servomotors and complement Aerotech motion controllers in applications as diverse as industrial robots, vision systems, assembly machines, machine tools, semiconductor manufacturing equipment, electronic manufacturing, and in a variety of other industrial control solutions. Aerotech drives, controllers, and linear and rotary servomotors are perfectly matched to provide the ideal solution to your motion control application. Aerotech drives are available in PWM and linear output, with from 10 to 150 amps peak current.
|
|
|
|
|
|
JetWeb makes interface-free integration of motion systems possible - from simple point-to-point positioning to complex contouring control system. As a user, you will only need one development environment and one programming language for both the control and motion system, regardless of whether stepper or servo motors are being used. Powerful, high-level instructions for all motion functions simplify programming. An uncomplicated motion user-interface make commissioning and service much easier.
JetMove represents a powerful and compact family of motion systems. Due to interface-free integration into Jetter control systems, the highest possible flexibility and simplicity is achieved. JetMove motion controllers can handle asynchronous drives, synchronous drives and / or linear motors. The drive family covers rated currents ranging from 1.5 A through 70 A.
Depending on the individual field of application, motion systems will have to fulfil the most varied tasks. For these tasks, Jetter AG provides a broad spectrum of motors. For all motors, starting from mini-size motors of 0.03 Nm up to motors of 115 Nm, a complete series of motion packages can be provided.
|
|
|
Trust Automation Linear Servo Amplifiers are designed for a wide range of applications, from heavy Industrial Automation to Semiconductor Processing Equipment, Robotics, Vision Systems, Electronics Assembly and Manufacturing and many more. Linear Amplifiers are ideal for applications that require high bandwidth, high precision and low electrical noise.
|
|
Yaskawa Sigma and LEGEND servo amplifiers have all-digital architecture with 32-bit microprocessor logic, high speed ASIC current-loop control, and IGBT power sections.
All Sigma and LEGEND amplifiers have serial encoder feedback with automatic motor recognition, expansion ports for addition of single-axis controls and network interfaces, separate main and control power connections, scalable encoder retransmission, sine-coded PWM output waveforms, full thermal overload protection of the motor, and UL, CE, and TUV certifications. Where required, Yaskawa amplifiers have built-in regenerative and dynamic brake resistors.
Yaskawa amplifiers are matched with Sigma motors with high-resolution serial encoder feedback to provide low velocity ripple and speed loop bandwidths exceeding 400 hz. These features allow very smoth motion at low speed, higher load-to-rotor inertia rations, and decreased setting time.
|
|
|
This family of 1- to 4-axis 3-phase servo amplifiers supports a wide variety of motor type, power ranges and interfaces. Using Delta Tau controllers with these amplifiers is an easy and cost-effective solution. The customer can put almost any type of motor on the output.
|
|
IBL2403 Intelligent Servo Drive
PIM2403 Intelligent Control Plug-in Module
Flexible and cost-effective solutions specially adapted for distributed and coordinated control of motors of powers up to 75 W, voltages up to 24 V. The drives are programmable with the high-level Technosoft Motion Language (TML).
PIM2403 is the plug-in version of IBL2403. The plug-in design reduces the time needed to assembly a machine by changing screw type contacts for simple pins. You can now easily design a clean PCB that will house all the components, and get rid of all the cables.
Key Features:
- Suitable for brushless, DC brush and step motors
- Motion controller, drive and PLC functionalities in one unit
- 12-24 V logic and motor power supply
- 3 A continuous, 6 A peak current
- Programmable digital inputs / outputs and analog inputs
- Quadrature encoder, Hall sensors or linear Halls
- RS-232 and CAN / CANopen
- Compact design (65 x 58 x 19 mm) for IBL2403
- Plug-in design (59 x 42 x 20 mm) for PIM2403
|
|
|
Deciding whether to use a digital drive or an analog drive really depends on what you need the drive to do. If you already have an intelligent controller that can handle events and it has enough I/O then either will work for your system. If your controller has limitations then a digital drive may be able to make up for them.
|
|
Servo Amplifiers
An amplifier is required to power any general purpose drive or servo drive. Depending on the application requirement, CMC offers both general purpose amplifiers and servo amplifiers.
CMC Amplifiers are available with new machinery, in systems and for retrofit.
|
|
All-purpose intelligent drive controls
with integrated stored-program control.
* Integrated frequency converter with power supply (230V)
* 24V, 100W power supply for external actuators
* Integrated PLC
* Programmable in high level language
* Integratet software module C200
* 13 digital power outputs up to 6,5A, short circuit proof
* 10 level programmable digital inputs
* 2 analogue inputs
* USB- and RS 232- connector
* Software update via Email possible
* Individually programmable variocontrols V810, V820, V850 and VarioTouch V900 adjustable
* Synchronising of 2 servo drives and up to 5 Efka stepping motor controls
* MC221A in combination with motor DC1500 for up to 3 Nm and 9000 rpm
* MC321A in combination with motor DC1550 for up to 8 Nm and 5000 rpm
|
|
|
|
|
|
Mitsubishi offer a wide range of Servo amplifiers to meet the demands of all types of applications. From standard digital pulse and analogue controlled amplifier through to dedicated SSCNET bus type amplifiers, there is a product for all circumstances.
One of the super series permanent functions is Real Time Adaptive Autotuning, which continuously monitors the control parameters and adjusts them automatically to match current conditions. This autotuning function delivers genuine automatic continuous adjustment with optimum performance for virtually the entire range of applications, including suspended loads and high friction applications.
The MR-J2S-A series
comes with analogue and digital inputs and is excellent for all single axis applications from positioning over speed to torque control.
The MR-J2S-B series
with network bus facility is perfect for precise multiple axis synchronisation solutions. They are designed for SSCNET connection in combination with Mitsubishi A-Motion-Controllers or Q-series Motion Controllers. The motion controllers and servo amplifiers can be linked via SSCNET network.
The MR-J2S-CL
is a totally programmable amplifier that gives an in-expensive complete positioning solution for the smaller power range.
|
|
This family of 1- to 4-axis 3-phase servo amplifiers supports a wide variety of motor type, power ranges and interfaces. Using Delta Tau controllers with these amplifiers is an easy and cost-effective solution. The customer can put almost any type of motor on the output.
3U Amplifier
3U amplifiers can be conveniently installed inside a UMAC system, giving you a complete controller/amplifier combination in one 3U style rack.
Geo Amplifier
The Geo Drive family of 1 and 2-axis, 3-phase amplifiers supports a wide variety of power ranges, motors, and interfaces. Built in a small, book-style package, the Geo Drive comes in three variations: Geo Direct PWM, Geo MACRO Drive and Geo PMAC Drive.
Quad Amplifier
The Quad Amp design is particularly well-suited for the machine tool industry and other applications, requiring power for X, Y, Z axes and spindle drive.
|
|
MICRO B NET DIGITAL ®(New)
Brushless super-compact digital servodrive, 100-230 Vac power supply. Driving motor ranges up to 7.5 Nm.
The MCBNetDigital® amplifier, is a standalone full digital converter with sinusoidal wave suitable for driving Ac Brushless Servomotors, encoderor resolver feedback.Comes complete with its own internal power supply with EMC line filter, dumping circuit and detachable plug-in terminals for easy installation. The power stage is made by Igbt.
|
|
|
Two TTL signals control these drives, one for PWM and the other for Direction. Since these drives don't take analog inputs for command the need for a D/A converter for drive control is eliminated.
|
|
Servo Amplifiers : MBL / MBLX
MBL and MBLX Motion Science Series Brushless Amplifiers are cost-effective, high performance motion control solutions in compact packages. Designed for brushless motors up to 850 oz-in (2250 oz-in. peak), they are MOSFET, pulse-width-modulated (pwm) servo amplifiers providing four-quadrant control in torque and velocity modes. They are available in 16 different board-level and housed models (12 - MBL and 4 - MBLX amplifiers). MBL and MBLX Motion Science Series Brushless Servo Amplifiers are ideal for a wide range of applications, including pick-and-place, semiconductor, medical, packaging, inspection, robotics, and factory automation.
|
|
The BR & BRS SERIES are Servo Dynamics premier Brush Servo Amplifiers and are built with the same reliability and quality that you have come to expect from all Servo Dynamics products.
|
|
Control Modes Indexer, Point-to-Point, PVT
Camming, Gearing, Position, Velocity, Torque
Command Interface CANopen/DeviceNet
ASCII and discrete I/O
Stepper commands
+/-10V velocity and torque command
PWM velocity and torque command
Master encoder (electronic gearing)
Communications CAN
RS232
Feedback Digital quad A/B encoder
Secondary encoder / emulated encoder out
Analog sin/cos encoder
Resolver (-R version)
Digital Halls
I/O - Digital 12 inputs, 4 outputs
Regen Panel: external resistor dissipation
Micro Panel: internal dissipation
Accessories External regen resisitors
External edge filter
Dimensions Panel: 191 x 140 x 64 mm [7.5 x 5.5 x 2.5 in]
Micro Panel: 126 x 90 x 53 mm [5.0 x 3.5 x 2.1 in]
|
|
|
The AB4 amplifier offers the same performance as the AB1A, in a reduced package. The AB4 operates off of 12Vdc supply input and can drive up to 4 HR motor elements total, either 1 x 4 element HR motor, or multiple HR motors totaling 4 elements. The AB4 is the smallest standard motor amplifier and is provided with a 26-pin rear connector (26 pin, two row header). This connector provides access to all functionality (motor, power inputs, limits, and I/O functions), making it easy to integrate. Additional motor and power inputs are available with standard connections on the front.
|
|
Technical Data: DARC Smart
- 4-quadrant AC DC drive controller
- Can be integrated in the fieldbus system FBM
- CANopen via DS 402
- Travel profile generator
- Linear- and sin² t-ramps
|
|
The NSC-3311 Series servo motion controller is a single-axis controller and amplifier designed for use with all Newmark servo motor stages. The controller can communicate with the host computer through an RS-232 or 10/100 Base-T Ethernet interface. With built-in high level functionality such as position tracking, contouring and teach/playback, programming the controller is greatly simplified.
The motion controller can operate as a stand-alone system through the digital I/O for synchronizing motion with external events. The NSC-3311 utilizes a 32-bit microprocessor to control the trajectory profile, acceleration, velocity, deceleration and program memory with multitasking for simultaneously running up to eight programs.
The NSC-3311 single-axis controller is commanded using virtually any programming language to pass simple ASCII command strings to the controller through the RS-232 or ethernet port. The command set includes conditional statements, event triggers, and math function.
|
|
|
|
|
|
The ISC-1000 is a full-featured motion trajectory generator integrated with a high-performance, sinewave vector servo drive, designed exclusively for OEM use. The integration of a trajectory generator and a servo drive gives you the benefits of lower cost, smaller size, less cabling, fewer components, and higher reliability. This integration also provides a surprising performance enhancement.
For years, Teknic has proven the performance benefits of integrating position/velocity servo compensation with torque (current) control. With the ISC-1000, not only are the position, velocity and torque loops fully integrated and synchronized under the control of a dedicated DSP, but now the motion trajectories are also fully integrated. This integration had to be very carefully architected to deliver its full promise, and in the ISC-1000 the performance benefits are immediately evident. Ultra-smooth and quiet motion, extraordinary tracking accuracy and zero settling time, coupled with the advantages of lower cost, smaller size and higher reliability make the ISC-1000 an unbeatable choice for OEM motion control applications.
The ISC-1000 is fully compatible with ControlPoint - Teknic's distributed, open-architecture machine control system. ControlPoint offers the OEM machine designer a wide array of control components to allow interconnectivity (with standard Category 5 cabling) to just about any digital or analog sensor, stepper motor, digital servo drive, brushless servo motor, etc. from any manufacturer.
|
|
|
|
