|
|
|
|
|
|
The new drive concept from Baumüller: b maXX 4000
modular - scalable - open
b maXX has up to 11 drawers for plug-in modules and can therefore be individually adapted for special automation tasks. Special plug-in modules interface
b maXX, including interface adaptors for most standard bus systems. The plug-in b maXX-drivePLC module provides integrated intelligent control.
b maXX serves as a basis for both simple and complex automation solutions.
The requirements placed on machines and systems center on the ability to cope with future needs, flexible expansion capacity and simple adaptation with modified production processes.
Modular
b maXX can be adapted in line with the specific requirements of a given
application. The modular design guarantees that the drive system can be
expanded adequately. Plug-in modules equip the controller, for example, with control functions or additional field bus interfaces. This ensures that the user can benefit from cost-effective configuration since only the capabilities and computing power required for a specific job need to be purchased.
Scalable
The drive capabilities are expandable to meet the demands and requirements that are placed on a machine or system. The performance capability of b maXX extends from the simple to the highly sophisticated automation application. Functionality and computing power are selected relative to the application on the basis of a consistent hardware and software platform.
Open
b maXX offers access to automation bus systems. The field busses EtherCAT, CANopen, CANsync, PROFIBUS-DP and Sercos are fully supported. An OPC server is provided for the interfacing of visualization systems. Remote access to process variables within the drive PLC is also possible without additional programming.
|
|
The compact controllers of series ARS offer advanced highly dynamic controller technology and flexibility in a broad output range.
The low-budget DSV series excels through its simple handling and the possibility for control without sensors using the INFORM system.
|
|
Servo Motor Controller PhyMac-3
3-Axes Servo Motor Controller with Integrated Contouring Control
- Nominal output current per axis: PhyMay-3X: 5 Arms, PhyMay-3XL: 10 Arms
- 8 digital inputs / 4 digital outputs, 3 of them with fast interrupt inputs
- Ethernet interface for monitoring and parametrization
- Programming with PhyMac-Comm
- Encoder inputs according to RS 422
- Feedback connectors: Resolver, Endat 2.1®,
- Sinus-Cosinus encoder or Hiperface®
- CANopen port for real time operation
- RS 485 port (e.g. for smart camera)
- Additional programmable optional interface for
- CAN, encoder input or encoder output for fourth drive
- Dimensions (HxBxT) in mm: 249x160x225 or 158x240x378
- Rail or wall mounting
- Optional: I/O extension to 12 inputs and 16 outputs
|
|
|
|
|
|
The MC206X Motion Coordinator is based on Trio’s high-performance 32-bit DSP technology, providing unprecedented computational speed, flexibility, and connectivity.
Advanced FPGA techniques enable 4 axes of stepper and servo circuitry plus a master encoder input to be enclosed in a compact DIN-rail mounted package.
An expansion connector is incorporated to add a fifth axis or any other optional Daughter Boards. Up to 8 axes may be provided using the SERCOS Daughter Board.
User programs are written in Trio’s established and easy to use multi-tasking BASIC language. The powerful Windows™ based MotionPerfect development software allows access to edit, debug and monitor programs in the MC206X. Complex motion such as cams, gears, linked axes, and interpolation is made easy with Trio’s comprehensive BASIC command set.
The MC206X has 16 opto-isolated digital I/O (8 in, 8 bi-directional). High speed hardware registration inputs are available for each axis where highly accurate control is required for applications such as print and packaging lines. The I/O count can be expanded using Trio CANbus digital and analogue modules.
Trio’s MC206X offers wide communications capability with 2 RS-232 serial ports, 1 RS-485 port, 1 TTL serial port, 1 USB port and 1 CAN channel as standard.
|
|
|
|
|
|
Brushed / Brushless D.C. Servo Controller
The RTC3000 and RTC4000 are miniature servo controllers with built-in amplifier for use in OEM equipment to control very small brushed or brushless DC servo motors.
The RTC3000 measures 3.68 x 1.815 x 0.35 inches and makes all connections on the long edge side. The RTC3000 operates from a 12 to 24 VDC source and switches 1 Amp of continuous and 3 Amp of peak current. The RTC4000 measures 1.18 x 2.15 x 0.50 inches. The RTC 4000 operates from a 12 to 24 VDC source and switches 3 Amp of continuous and 6 Amp of peak current.
The small motor controller outputs are protected from short circuit to each other, to supply and to ground. The 32K of internal program memory can be used by jumpering two signals together at the memory port. Alternatively, the port signals can be routed to an external memory module. Either way, the unit can be programmed in BASIC to operate stand-alone. Stand-alone programs can interact with all inputs and outputs of the RTC3000, affording total flexibility and a multitude of additional interface options. The controller communicates over RS232 and RS485. All signal ports have supply and ground to power external devices such as limit switches, encoders, hall sensors, etc.
Like the SmartMotor, both the RTC3000 and RTC4000 have an additional network port called AniLink that interfaces with a vast array of peripherals.
|
|
HeiControl HCB servo drive controller
Our servo drive controller HCB has been developed for the handling of demanding tasks like speed, torque and positioning applications. Its regulation can be done via SPS-compatible digital and analog inputs or via field bus (CANopen). Its power output is - depending on the motor - up to 750W for operation in mode S1. Mains supply is effected via an active PFC. In order to reduce the noise level, the controller disposes of a temperature-depending fan control.
|
|
PMA90/180 Servo Amplifier
The PMA 90/180 Servo Amplifier has the ability to control either brushed or brushless motors all in one. The 40kHz PWM frequency is double that of most conventional drives, and enables direct connection to PML motors without an external choke.
The compact design and small footprint also saves valuable space. The drives are easy to set up whehter used stand alone or with digital motion controllers.
Features include amplifier enable and direction enable inputs (for connection to limit switches), full motor/drive protection, and potentiometer operation as an on-board full range reference signal.
Input gain, loop gain, offset parameters, component carrier and mode switches are adjustable. Configurable peak and continuous current limits allow high acceleration without sacrificing protection against continuous overloads. Peak current time can be adjusted from 50ms to 3 sec.
|
|
|
We offer a wide range of control units for standard to high-end applications that are customized for your implementation. Integrated motion and logic, extensive technical functionality, certified safety technology and standardized interfaces leave nothing to be desired.
|
|
|
We offer a wide range of control units for standard to high-end applications that are customized for your implementation. Integrated motion and logic, extensive technical functionality, certified safety technology and standardized interfaces leave nothing to be desired.
|
|
| ... products without technical information |
| |
|
|