|
|
The R256 is a compact step motor driver and controller which is designed as a stand-alone option to the integrated motor/controller. This product offers the user the option to daisy-chain up to 16 of these units to meet multi-axis application demand. In addition, the R256 offers the user the ability to query various existing parameters such as the microstepping resolution, current position as well as the various speed settings. Visit www.LinEngineering.com today!
Features:
2.0 Amp Chopper (PWM) Driver with Controls
Operates from 12 to 40 VDC
Microstep resolution from ½ to 256 microsteps
Two digital I/O's and two fixed inputs
Stand alone operation with no PC
Single 4 wire bus linking up to 16 units
Fully programmable speeds, current, and acceleration
Stores up to 16 different programs (4kbytes of memory)
|
|
Control electronics for DC and EC motors
1 and 4-quadrant servoamplifiers
Positioning control units
- MIP
- EPOS
Characteristics
- Matched to maxon motors
- Comprehensive range of cables and accessories available
- Customization if required
|
|
EPOS P 24/5 - programmable positioning controller
The new programmable EPOS P positioning controller is a new addition to the successful EPOS family. With all the features of the online-commanded EPOS slave version, this new master version also has an integral processor and memory for stand-alone operation and independent controlling of up to 127 other units via CANopen bus. Programming complies with IEC 61131-3 standard. Standardized function blocks in accordance with PLCopen motion control standard make implementation easy.
EPOS P 24/5 is a freely programmable positioning controller with an integrated power stage for brushless and brush DC motors of up to 120 watts. This makes it ideal for very dynamic and minute precision drives and controlling systems. Several drives can be networked and coordinated through a standardized CANopen interface, particularly other EPOS slave units. Different operating modes can be pre-selected for controlling purposes (point-to-point, positioning controller with Feedforward, speed controller, torque control, Homing , electronic gearing, step/direction and position marker).
|
|
These solid state magnetic accelerators have been designed as speed input devices used for solid-state controls for electric vehicle traction motors. Applications include industrial fork lifts, utility vehicles, and airport ground support vehicles.
Input voltage : 18 to 80 volts DC
Output voltage (maximum) : 3.65 volts (nominal)
Output voltage (minimum) : 0.35 volts (nominal)
Start switch output voltage : Equal to user battery input voltage
Start switch output current : 3 amps continuous, 5 amps intermittent (10 seconds)
Note: This accelerator switch does not contain a 1A switch.
Features and Benefits:
- Start switch function is performed by a power MOSFET, in lieu of a mechanical device
- Typical actuator force is 5 lbs, and should not exceed 7 lbs
- Switch may be operated through a linkage mechanism or directly from the vehicle accelerator pedal
- Customer connection is made by means of a metric M10x1.5 male thread
- Underwriter's Laboratory Type EE construction, O-ring cover seal, blind mounting holes, and insulated wire hole grommet all combine to eliminate the need for periodic cleaning
- No mechanical adjustment required after installation
- Includes reverse battery protection and internal fusing for start switch over-current protection
- A hall effect sensor detects the input shaft displacement through the 0.75" shaft stroke
- Switch contains a push pull linear input shaft, with a typical 0.1" displacement for start switch closure |
|
| ... products without technical information |
| |
features:
Safety
Opening of MCC after installation not required for testing.
Long term data acquisition possible.
Only high impedance port (0V) external to MCC when Explorer not connected.
Fused
Multiple Isolation Level.
Purely passive device when Explorer not connected.
CT Output: Voltage (no danger to operator with open or short circuit).
Ease of Use
Only one +/- 5 Volt bus connection required.
Only one step data acquisition
Safe electrical on-line testing within 40 seconds without interruption of motor operation.
Consistent Results
No Risk of Misconnection
Gain values of sensor array stored in EP.
Accuracy of Results
Calibration values stored in EP.
Motor ID imbedded in EP.
|
|
| With the X-Class, Force Control transforms oil-shear technology into affordable, off-the-shelf designs. Four standard models-XB1, XB2, XB3, and XB4, covers the most popular size range for brakes. Convenient double C-face or motor brake mounting and Clamped-Split-Quill allows drop-in, bolt-up installation. |
|
saia motor controller
Caractéristiques :
• logiciel destiné au développement, au test et à l’optimisation de systèmes de moteurs pas à pas
• logiciel fonctionnant sous Windows
• logiciel simple d’utilisation
• réglage rapide des paramètres
• visualisation de la vitesse et de la position
• courses de positionnement
Dimensions (mm) :
Boîtier en métal 160 x 100 x 30 (euro-PCB)
Pilote : pour moteurs polaires et bipolaires
Tension d’alimentation (V/CC) : de 3 à 55 V/CC – 24 V/CA
Alimentation du moteur:
tension constante et courant continu (commandé par hacheur)
Mode de pas : pas entier, demi-pas et micro-pas
Source d’impulsion : interne, programmable
Entrées de commande :
• 3 entrées numériques
• 4 sorties signal
• 1 entrée analogue 0 … 10 V/CC
• contact à relais
Configuration : RS 232, USB
|
|
| PMD's motion control Developer's Kits are integrated board and software packages available to designers who need to do electro-mechanical and software design using PMD's motion processors. These motion control developer's kits include the surface mount card, interconnection cables, a full set of manuals, and a CD-ROM containing PMD's powerful Pro-Motion GUI and C-Motion to simplify development. |
|
The development kit DVK90109 has been developed by Melexis to create specific applications using 125 kHz protocols and to evaluate the advantages of the MLX90109 transceiver IC.
The DVK90109 results of the combination of the development board DVKRFID and the evaluation board EVB90109. The EVB90109 is plugged on the DVKRFID through a 10 pins connector (including Coil, VCC and Ground) and controlled by the microcontroller ATMEGA128.
A set of commands has been elaborated by Melexis to define the communication between the Computer and the evaluation board EVB90109.
Other products available: |
|
- Wide range of PLC and displays for industry's automation processes.
- Modular and compact units from 10 I/O up to 60 I/O included in the equipment.
- I/O expansion modules are available, also analogue and digital I/O modules, communication and units (Cnet, Fnet, Pnet, Dnet)
- Glofa and Master-K Series |
|
Ergo XJN/XSN
The sit-on stacker is one of the rider stackers. Gives ergonomic handling at a low cost.
Suitable for mixed handling, stacking/transfer with continuous driving time not exceeding 3 hours.
XJN (Junior) has the smallest turning radius.
XSN (Senior) has the biggest battery.
|
|
|
|