|
|
World first: The M70 Series
The new M70 Series from Mitsubishi Electric sets new industrial standards for the next generation of machine tools. An essential characteristic of the controller is its user-friendly operation, applying equally to setup, programming or daily use. Powerful programming tools such as NAVI MILL and NAVI Lathe assist in rapid program writing. In addition, the M70 Series offers new functions, which allow an even higher speed and level of precision of the machine tool. That results in short machining times and a high level of precision in the workpieces.
With the NC Designer, customised screen displays are simple and quick to produce. The development tool, which is also available for the M70 Series, supports the creation of individual displays without any programming or with C programming.
|
|
The TNC Controls for Milling Machines and Machining Centers:
Form a complete product line with their various features
Control machines with up to 13 axes
Their plain-language programming capability is suited for the workshop floor
Can also be programmed externally
Are also suited for automated production
Are the correct choice for everything from simple milling procedures to high-speed milling
The MANUALplus 4110 - Contouring Control for Lathes:
As a cycle control, it combines simple operation with the productivity of a CNC.
Enables the familiar manual production of simple workpieces
Produces difficult workpieces automatically
Supports programming with many cycles
Performs complementary milling and drilling operations in a single clamping
|
|
M60S CNC series: most advanced hardware performance in the industry
Mitsubishi’s M60S CNC series delivers the most advanced hardware performance in the industry. Powerful 64-bit CPUs make it easy to configure maximum-efficiency networked production systems. Additional Ethernet and CC-Link support functions make it possible to use high-speed data servers and integrate a wide range of other factor automation products. The M60S series enables exceptionally flexible machine design, opening up new possibilities in the CNC field.
CNCs designed for global markets
These user-friendly CNC units include user interfaces in a choice of 12 major languages. Their exceptional programming functions and compatibility make it very easy to integrate them in a wide range of factory automation products.
Benefit from the Mitsubishi’s many years of experience in CNC technology
High-performance, 64-bit RISC processors enable the development of extremely efficient applications. The high-speed and high-precision functions of the M60S CNC series make high-speed machining a reality in tool and mould making applications. The units also have a very wide range of powerful functions for turning applications.
|
|
CAD/CAM system
Control unit and CNC controller
Fitted with an MS Windows standard PC, a fully digital CNC controller, digital CNC axes, as well as digital AC servo motors, STM systems ensure precise ackground control of safety management, axis positioning and SPS input/output management. The benefits are plain-text malfunction management,
a high-speed CNC controller for low-vibration axis positioning, as well as a 10/100/1000 MBit network connection for easy data management. |
|
Power M (16 axis numeric controller)
It represents the TOP of the range of controllers “All in one” produced by Tex Computer and based on an owner operative system Real Time Multitasking implemented on a processor RISC 32 bit which includes editor ASCII and compilation functions.
It’s available with LCD display 8,4” or 15”, with or without touch screen, possibility to connect in Ethernet and manage axis through interfaces:
• Analog: +/- 10V
• Digital: PWM o Step / Direction
• FieldBus: CANopen (DS402) and soon EtherCAT
PLC/CNC/HMI tasks programming in structured language and the possibility to execute complex axis interpolation functions make this product suitable to manage automatic machines with high productivity and robotics.
It’s available with classic ISO program which can be personalized in order to make it more user friendly and functional to the application.
You can also connect a digital telecamera to the controller which allows the user to control working in dangerous and not so easy to reach areas not. |
|
Discover a new experience in CNC technology. The Mitsubishi CNC control series enable productivity lead and revolutionize Industrial Automation.The high-speed design of the Mitsubishi CNC series fulfils all future requirements of performance and working accuracy.
High Speed
High Performance
High Precision
These are only some of the characteristics which considerably increase your productivity.
M700
The M700 series is Mitsubishi’s new flagship CNC controller line and it brings significant new dimensions of power and user-friendliness to CNC applications. The advanced nano technology of the M700 series is supported by a high-speed servo bus for world-class machine performance.
M60S
The M60S Series CNCs offer greatly improved processing capabilities, high efficiency, and high precision machining capabilities in a compact unit.
Magic
plug in card for an IPC or PC
C6 / C64
cost-efficient control of manufacturing cells, transfer machining lines, and rotary index machines |
|
Navigator to Ultimate Comfort and Performance: Mitsubishi CNC E60 series
NEW EZMotion-NC E68
EZMotion CNC E60 Features
· Compact CNC (Panel-in structure) with integrated control unit
· High-performance CNC with 64-bit CPU
· Compact servo motors with high-resolution position encoders
· Quick selection of turning or milling modes in initial setup screen
· Analog output for the spindle’s frequency inverter drive
· All CNC data is stored in CASSETTE MEMORY hardware
E68 Features
· 8.4“ colour LCD display
· Front IC card I/F (optional)
· Compact panel-in structure
· Max. CNC axles: 4
· Max. spindles: 2
· Enhanced PLC capabilities
· Multi-language display
Customizable Screen Display
The sign-on screen is customizable. The screen display can be designed on a PC using bitmap editing software.
Advanced PLC Development Tools
PLC programming is performed with GX Developer, the development software package of the MELSEC PLC series.
|
|
M700 Series - Mitsubishi’s new flagship CNC controller line
The M700 series is Mitsubishi’s new flagship CNC controller line and it brings significant new dimensions of power and user-friendliness to CNC applications. The advanced nano technology of the M700 series is supported by a high-speed servo bus for world-class machine performance.
New CNC architecture for maximum processing speed
The power of the CNC M700 series is enhanced by a brand-new RISC CPU and high-performance ASICs.
Full nano control for maximum precision machining
Full nano control combined with the innovative SSS (Super Smooth Surface) and OMR (Optimum Machine Response) features enables the M700 series to deliver truly exceptional machining quality.
Simplified operation and drastically faster setup times
The new, user-friendly CNC display makes all operations easier, from initial setup to production. In addition to this the M700 series supports new functions for checking machining in 3D and visualising machine statuses for even easier operation.
|
|
Z32WRT Compact
Competitive price, High Speed, User Friendly
In a single PC, at a competitive price, the CNC Z32 and the powerful software "Z32 for Windows" for managing and setting up the machine.
The Z32WRT CNC comes with a SVGA 15" touch screen video panel, for the maximum machine operator confort.
Ideal for High-Speed Machining of complex surfaces generated by CAD/CAM, where other that high speed and super-finishing, the friendly and powerful human-machine-interface is very important.
The operative system of the Z32WRT is "Windows XPEmbedded".
The choice of the Embededd version permits to modify the system behaviour in order to avoid corruption of operative system files in case of sudden loss of power supply. |
|
Fagor Automation offers the widest and most complete range of products and provides a complete solution for governing all kinds of machine tools from the simplest to the state-of-the-art.
Fagor CNC systems as well as the servo drive systems, motors and accessories excel by their friendly, simple and intuitive operation.
Thanks to FAGOR conversational models, you will be able to respond to any of your needs with absolute efficiency. They are especially designed for unitary machining jobs. Their interactive programming only requests the machining conditions and the geometry data indicated on the blueprint. They do not require specialized programmers. |
|
| With OpenCNC® or WinMotion® open- architecture software loaded on a compact, rugged platform, MDSI's new FlashCNC and FlashMotion solutions offer the best of both worlds. The freedom of open architecture integrated with industrial grade controls. FlashCNC and FlashMotion combine MDSI's innovative and industry- leading high- speed software, compact rugged hardware, NEMA rated, and digital machine interface into a complete control package. It's convenient, user friendly, easy to integrate - and it saves you time and money. |
|
The PA 8000e established totally new standards. Using this innovative product, you save time, reduce cost and increase your worldwide flexibility.
Due to the Single CPU Concept standardized drive interface do not need local intelligence. PA 8000e contains all hardware components needed for a safe and sound CNC operation, as there are: Real time clock, watchdog timer, non-volatile CMOS memory for data, and relays for essential system status. |
|
ABAMATIC 1
- modular microprocessor control
- user-friendly, manual and automatic grinding are possible
- digital position read-out on large LCD
- electronic handwheel for automatic and manual operation
- graphic-assisted input of workpiece data or teach-in process
- manual infeed also possible in automatic mode
- infeed either on one or both sides
- error messages in plain english text
- constant cutting speed control (optional)
- remote diagnosis (optional)
- automatic program sequence with roughing, finishing and
spark-out
- automatic compensation of the dressing infeed and the
wear on the grinding wheel
- Digital position read-out on large LCD.
- Electronic handwheel for automatic and manual operation.
- Graphic-assisted input of workpiece data or TEACH-IN
process.
- Manual infeed also possible in automatic mode.
- Infeed either on one or both sides.
- Error messages in clear text (ENGLISH).
- Constant cutting speed control (optional).
- Remote diagnosis (optional).
- Automatic program sequence with roughing, finishing and
spark-out.
- Automatic compensation of the dressing infeed and the
wear on the grinding wheel.
|
|
Fagor Automation offers the widest and most complete range of products and provides a complete solution for governing all kinds of machine tools from the simplest to the state-of-the-art.
Fagor CNC systems as well as the servo drive systems, motors and accessories excel by their friendly, simple and intuitive operation.
Thanks to FAGOR conversational models, you will be able to respond to any of your needs with absolute efficiency. They are especially designed for unitary machining jobs. Their interactive programming only requests the machining conditions and the geometry data indicated on the blueprint. They do not require specialized programmers. |
|
Mazatrol Matrix
The 6th generation conversational CNC control from MAZAK
MAZATROL, the first conversationally programmed CNC system in the world, was introduced in 1981.
In 1998, the MAZATROL was fused with a personal computer that incorporated our extensive expertise for unsurpassed operating efficiency...
The newest model, the MAZATROL MATRIX, has been designed to be the optimum system for machine tools, offering a range of Intelligent Functions for increased productivity and ease of operation.
|
|
Compact CNC controllers:
The compact CNC controllers 903 and 905 represent an economical solution for simpler applications with one channel and up to 8 axes. The cost-efficient controller is suitable for automation devices, handling systems, drills and milling machines, lathes, processing machines, grinding machines, and many other applications.
Modular CNC controllers:
The modular individual CNC controllers are predestined for multi-axle and multi-machine applications for up to 8 channels and up to 320 CNC axes. Since they are tailored to the application, the controllers are only as large and complex as required. The open and scalable system can be expanded at any time. All conceivable controller tasks can be covered with the modular CNC controllers, such as turning, milling, grinding, fitting, bending, using laser beams up to the use of special-purpose machine tools. |
|
Hardware Simulators
Finding skilled operators today remains a challenge across industries and businesses. While hands-on training is by far the most effective method of training operators, it can be very expensive in terms of lost production time and risk to capital expenditure, such as machine tools.
GE Fanuc CNC Control Simulators allow new operators to practice and learn new operating procedures in a benign environment without risk to capital investments and valuable production time. Maintenance personnel and new operators can test troubleshooting routines and get cross-over training on the actual control systems used on the plant floor, gaining valuable knowledge about the inner working of CNC controls and the processes to evaluate problems.
Develop Critical Applications Offline
* A GE Fanuc CNC Control Simulator can speed development times when actual control timing is critical, and it is also necessary to physically interact with auxiliary devices. It allows development and testing on the actual control platform without tying up valuable production time, or risk crashing a valuable machine tool. Simulators can support all of the functions of the control system currently on your machine tool, including Macro Executer and FAPT Picture custom screen development, C-Executer programs, Manual Guide I programming, as well as custom macro B and G-code programs. With GE Fanuc CNC Simulators, you have the ability to toggle physical I/O points to interact with external equipment as well as accept both digital and analog I/O from those devices. |
|
The new generation of order on basis PC IndraMotion MTX is opened, so much on the level of the computing systems of l’ company qu’ on the level actuators – sensors. The system d’ exploitation current Microsoft makes it possible to connect it to the systems of CAO/FAO or complementary software via standard programs PC such as OPC, ActiveX, or XML. It is also compatible with the network Ethernet TCP/IP for the communication with d’ other components and systems.
Only one numerical control can control on a ring SERCOS jusqu’ with 32 axes divided into 12 independent channels CN. Thus, constantly, cycle time d’ interpolation of 8 axes does not exceed 1ms. IndraMotion MTX holds these exceptional performances whatever the complexity of the machine. Its characteristics particularly intend it for l’ machining 3D of parts on 5 or 6 axes with or without removal of chips. But it increases l’ also considerably; effectiveness of the combined applications of turning and milling or punching and nibbling.
|
|
Maximum profitability during simplest application and operation
Simple operation
With MILLPWR the operator of a conventional milling machine can already make that after few hours of parts with complicated outlines and, without having numerical control training.
Descriptions of outline easily made
Complex parts can be manufactured by programming in 3 axles fast and with high precision.
Immediate high profitability
MILLPWR is ideal for workshops with small series. The time gained is impressing, because you save the problems when marking out and working with templates.
|
|
|
|
