|
|
Galil's AMP-19540 is a 4-axis amplifier for driving brush or brushless motors up to 500 Watts. By interfacing directly to Galil's DMC-18x2, DMC-18x0, or DMC-18x6 controllers, it provides a cost-effective controller/drive solution for multi-axis applications. The AMP-19540 contains four transconductance, PWM amplifiers for driving brush or brushless motors. Each amplifier operates at 18V to 80V dc, up to 7 Amps continuous, 10 Amps peak. The AMP-19540 gain setting is easily configured with jumpers. The PWM switching frequency is 60 kHz.
The AMP-19540 enclosure has dimensions of 6.8" x 8.75" x 1". It interfaces to Galil's DMC-18xx PCI bus controller with a single, 100-pin high density SCSI cable. Signals for each axis are brought out through D-type connectors located on the AMP-19540. For applications with less than three axes, the AMP-19520 two-axis model is available. A shunt regulator option is also available.
|
|
Aerotech manufactures drives for a wide range of industrial automation applications. Our drives power our own servomotors and complement Aerotech motion controllers in applications as diverse as industrial robots, vision systems, assembly machines, machine tools, semiconductor manufacturing equipment, electronic manufacturing, and in a variety of other industrial control solutions. Aerotech drives, controllers, and linear and rotary servomotors are perfectly matched to provide the ideal solution to your motion control application. Aerotech drives are available in PWM and linear output, with from 10 to 150 amps peak current.
|
|
|
|
|
|
JetWeb makes interface-free integration of motion systems possible - from simple point-to-point positioning to complex contouring control system. As a user, you will only need one development environment and one programming language for both the control and motion system, regardless of whether stepper or servo motors are being used. Powerful, high-level instructions for all motion functions simplify programming. An uncomplicated motion user-interface make commissioning and service much easier.
JetMove represents a powerful and compact family of motion systems. Due to interface-free integration into Jetter control systems, the highest possible flexibility and simplicity is achieved. JetMove motion controllers can handle asynchronous drives, synchronous drives and / or linear motors. The drive family covers rated currents ranging from 1.5 A through 70 A.
Depending on the individual field of application, motion systems will have to fulfil the most varied tasks. For these tasks, Jetter AG provides a broad spectrum of motors. For all motors, starting from mini-size motors of 0.03 Nm up to motors of 115 Nm, a complete series of motion packages can be provided.
|
|
|
Trust Automation Linear Servo Amplifiers are designed for a wide range of applications, from heavy Industrial Automation to Semiconductor Processing Equipment, Robotics, Vision Systems, Electronics Assembly and Manufacturing and many more. Linear Amplifiers are ideal for applications that require high bandwidth, high precision and low electrical noise.
|
|
Yaskawa Sigma and LEGEND servo amplifiers have all-digital architecture with 32-bit microprocessor logic, high speed ASIC current-loop control, and IGBT power sections.
All Sigma and LEGEND amplifiers have serial encoder feedback with automatic motor recognition, expansion ports for addition of single-axis controls and network interfaces, separate main and control power connections, scalable encoder retransmission, sine-coded PWM output waveforms, full thermal overload protection of the motor, and UL, CE, and TUV certifications. Where required, Yaskawa amplifiers have built-in regenerative and dynamic brake resistors.
Yaskawa amplifiers are matched with Sigma motors with high-resolution serial encoder feedback to provide low velocity ripple and speed loop bandwidths exceeding 400 hz. These features allow very smoth motion at low speed, higher load-to-rotor inertia rations, and decreased setting time.
|
|
|
This family of 1- to 4-axis 3-phase servo amplifiers supports a wide variety of motor type, power ranges and interfaces. Using Delta Tau controllers with these amplifiers is an easy and cost-effective solution. The customer can put almost any type of motor on the output.
|
|
|
Deciding whether to use a digital drive or an analog drive really depends on what you need the drive to do. If you already have an intelligent controller that can handle events and it has enough I/O then either will work for your system. If your controller has limitations then a digital drive may be able to make up for them.
|
|
Servo Amplifiers
An amplifier is required to power any general purpose drive or servo drive. Depending on the application requirement, CMC offers both general purpose amplifiers and servo amplifiers.
CMC Amplifiers are available with new machinery, in systems and for retrofit.
|
|
All-purpose intelligent drive controls
with integrated stored-program control.
* Integrated frequency converter with power supply (230V)
* 24V, 100W power supply for external actuators
* Integrated PLC
* Programmable in high level language
* Integratet software module C200
* 13 digital power outputs up to 6,5A, short circuit proof
* 10 level programmable digital inputs
* 2 analogue inputs
* USB- and RS 232- connector
* Software update via Email possible
* Individually programmable variocontrols V810, V820, V850 and VarioTouch V900 adjustable
* Synchronising of 2 servo drives and up to 5 Efka stepping motor controls
* MC221A in combination with motor DC1500 for up to 3 Nm and 9000 rpm
* MC321A in combination with motor DC1550 for up to 8 Nm and 5000 rpm
|
|
|
|
|
|
Mitsubishi offer a wide range of Servo amplifiers to meet the demands of all types of applications. From standard digital pulse and analogue controlled amplifier through to dedicated SSCNET bus type amplifiers, there is a product for all circumstances.
One of the super series permanent functions is Real Time Adaptive Autotuning, which continuously monitors the control parameters and adjusts them automatically to match current conditions. This autotuning function delivers genuine automatic continuous adjustment with optimum performance for virtually the entire range of applications, including suspended loads and high friction applications.
The MR-J2S-A series
comes with analogue and digital inputs and is excellent for all single axis applications from positioning over speed to torque control.
The MR-J2S-B series
with network bus facility is perfect for precise multiple axis synchronisation solutions. They are designed for SSCNET connection in combination with Mitsubishi A-Motion-Controllers or Q-series Motion Controllers. The motion controllers and servo amplifiers can be linked via SSCNET network.
The MR-J2S-CL
is a totally programmable amplifier that gives an in-expensive complete positioning solution for the smaller power range.
|
|
This family of 1- to 4-axis 3-phase servo amplifiers supports a wide variety of motor type, power ranges and interfaces. Using Delta Tau controllers with these amplifiers is an easy and cost-effective solution. The customer can put almost any type of motor on the output.
3U Amplifier
3U amplifiers can be conveniently installed inside a UMAC system, giving you a complete controller/amplifier combination in one 3U style rack.
Geo Amplifier
The Geo Drive family of 1 and 2-axis, 3-phase amplifiers supports a wide variety of power ranges, motors, and interfaces. Built in a small, book-style package, the Geo Drive comes in three variations: Geo Direct PWM, Geo MACRO Drive and Geo PMAC Drive.
Quad Amplifier
The Quad Amp design is particularly well-suited for the machine tool industry and other applications, requiring power for X, Y, Z axes and spindle drive.
|
|
MICRO B NET DIGITAL ®(New)
Brushless super-compact digital servodrive, 100-230 Vac power supply. Driving motor ranges up to 7.5 Nm.
The MCBNetDigital® amplifier, is a standalone full digital converter with sinusoidal wave suitable for driving Ac Brushless Servomotors, encoderor resolver feedback.Comes complete with its own internal power supply with EMC line filter, dumping circuit and detachable plug-in terminals for easy installation. The power stage is made by Igbt.
|
|
|
Two TTL signals control these drives, one for PWM and the other for Direction. Since these drives don't take analog inputs for command the need for a D/A converter for drive control is eliminated.
|
|
Servo Amplifiers : MBL / MBLX
MBL and MBLX Motion Science Series Brushless Amplifiers are cost-effective, high performance motion control solutions in compact packages. Designed for brushless motors up to 850 oz-in (2250 oz-in. peak), they are MOSFET, pulse-width-modulated (pwm) servo amplifiers providing four-quadrant control in torque and velocity modes. They are available in 16 different board-level and housed models (12 - MBL and 4 - MBLX amplifiers). MBL and MBLX Motion Science Series Brushless Servo Amplifiers are ideal for a wide range of applications, including pick-and-place, semiconductor, medical, packaging, inspection, robotics, and factory automation.
|
|
The BR & BRS SERIES are Servo Dynamics premier Brush Servo Amplifiers and are built with the same reliability and quality that you have come to expect from all Servo Dynamics products.
|
|
Control Modes Indexer, Point-to-Point, PVT
Camming, Gearing, Position, Velocity, Torque
Command Interface CANopen/DeviceNet
ASCII and discrete I/O
Stepper commands
+/-10V velocity and torque command
PWM velocity and torque command
Master encoder (electronic gearing)
Communications CAN
RS232
Feedback Digital quad A/B encoder
Secondary encoder / emulated encoder out
Analog sin/cos encoder
Resolver (-R version)
Digital Halls
I/O - Digital 12 inputs, 4 outputs
Regen Panel: external resistor dissipation
Micro Panel: internal dissipation
Accessories External regen resisitors
External edge filter
Dimensions Panel: 191 x 140 x 64 mm [7.5 x 5.5 x 2.5 in]
Micro Panel: 126 x 90 x 53 mm [5.0 x 3.5 x 2.1 in]
|
|
|
The AB4 amplifier offers the same performance as the AB1A, in a reduced package. The AB4 operates off of 12Vdc supply input and can drive up to 4 HR motor elements total, either 1 x 4 element HR motor, or multiple HR motors totaling 4 elements. The AB4 is the smallest standard motor amplifier and is provided with a 26-pin rear connector (26 pin, two row header). This connector provides access to all functionality (motor, power inputs, limits, and I/O functions), making it easy to integrate. Additional motor and power inputs are available with standard connections on the front.
|
|
PMA90/180 Servo Amplifier
The PMA 90/180 Servo Amplifier has the ability to control either brushed or brushless motors all in one. The 40kHz PWM frequency is double that of most conventional drives, and enables direct connection to PML motors without an external choke.
The compact design and small footprint also saves valuable space. The drives are easy to set up whehter used stand alone or with digital motion controllers.
Features include amplifier enable and direction enable inputs (for connection to limit switches), full motor/drive protection, and potentiometer operation as an on-board full range reference signal.
Input gain, loop gain, offset parameters, component carrier and mode switches are adjustable. Configurable peak and continuous current limits allow high acceleration without sacrificing protection against continuous overloads. Peak current time can be adjusted from 50ms to 3 sec.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
