|
|
|
Galil offers a complete line of single and multi-axis controllers for stepper and servo motors. Interfaces include PCI, ISA, PC/104, cPCI, VME, USB, RS232 and Ethernet. Modes of motion include point-to-point positioning, jogging, linear and circular interpolation, contouring, ecam and electronic gearing. Also programmable I/O for interface to external sensors.
|
|
The RMC70 product complements Delta's flagship RMC100 family and expands Delta markets by offering even more value for one and two axis applications. The following is a list of the currently available features. More options will be available in future releases.
RMC70 Hardware:
The RMC70 is a modular controller. The Base module - consisting of the CPU and the Axis module - is factory-configured. Each factory-installed Axis module is available with one or two control axis interfaces. Up to 4 expansion modules may be added to the RMC70, including digital I/O, analog reference and pressure or force inputs.
|
|
The RMC100 Series is Delta's most versatile motion control product line. With two main CPU options-the RMC100 or the new RMC150E-the RMC100 Series is a modular, high-performance motion controller appropriate for a wide range of industrial applications for position and velocity control. The RMC101 and RMC151E CPUs provide all the benefits of the RMC100 and RMC150E, plus dual-loop control for advanced control options, such as position-pressure, position-force, and active damping.
A variety of communications options makes these compact, DIN rail-mounted controllers an excellent choice for large and small systems.
The RMC's modular construction allows you to mix and match from two to eight axes of any combination of transducers. Delta will factory configure your complete RMC100 Series motion control module.
|
|
Power T (6 axis numeric controller)
Ideal to manage pantographs for cutting, small working centres, Cartesian robots and SCARA. It’s available with display 6,5”, 8,4”, 10”, 12” and 15” with or without touch screen. Thanks to 3 CANopen ports, 2 serial ports with Modbus protocol and the possibility to manage up to 40 analog inputs with 12 bit resolution, it’s possible to automate stations for production automatic tests both in “Stand Alone” configuration that can be connected in Ethernet to PC that works as supervisor and data archive.
|
|
|
|
|
|
The POSYS® 3104 (Designed & Made in Germany) is a PC/104 form factor board dedicated to high performance motion control applications with extensive interpolation functionality. The POSYS® 3104 is designed to control up to 4 axes of servo and stepper motors and provides hardware linear, circular, Bit Pattern and continuous interpolation which allow to perform the most complex motion profiles. Update rates per axis do not exist as each axis runs in absolute real-time mode simultaneously which makes these boards to one of the best performing motion controllers for up to 4 axes in the market.
The POSYS® 3104 is a low-cost PC104 motion controller offering a wide range of possibilities. The controller is dedicated to pulse & direction output which allows to control any type of motor provided the driver/amplifier is capable to accept pulse & direction signals. Many amplifiers on the market exist for this purpose (we supply versions from AMC) which can even be configured for either brushed or brushless servo motors.
The usage of one controller type throughout the system, but still keeping it open for various motor types, depending on your customer's demands, enhances this controller to be your first choice. Software written for this controller does not need to be re-written again. Time-to-market design is done once. Equip your machine with steppers or servos or combine them to any configuration you desire.
Due to its possibilities there are practically no limitations to where this controller can be used. Robotics, semi-conductor, medical and harsh industrial environments - where ever you need precise control of your motors the POSYS® 3104 is ready.
|
|
|
|
|
|
The POSYS® 800-B (Designed & Made in Germany) is a state-of-the-art 1 to 4 axes PC/104-Bus motion controller supporting multiple host connection modes and motor types. The POSYS® 800-B supports parallel-bus via PC/104-Bus and serial communication RS232. Motor types supported are DC brushed servo, brushless servo, microstepping and stepper motors depending on model each axis individually configurable. Other features are the fast servo loop update rates of 100 µs/1 axis to 400 µsec/4 axes, 5 Mcounts/sec quadrature encoder input and on-board trace capabilities.
Motion profiles include S-curve, trapezoidal (with smoothing factor), velocity contouring, and electronic gearing, linear interpolation for 4 axes. In addition they also support external profile mode which allows the user to download complex motion profiles directly in to the controllers memory reliefing the host from extensive calculation tasks.
With up to 164 commands, depending on model, the POSYS® instruction set offers flexibility and versatility to software application programmers. Instructions are used to initialize and control the motion processor. User selectable profiling modes supported by the motion processor include S-curve, trapezoidal, velocity contouring and electronic gearing. The POSYS® 8xx-B accepts input parameters such as position, velocity, and acceleration from the host and generates a corresponding trajectory. The POSYS® 8xx-B accepts input parameters such as position, velocity, and acceleration from the host and generates a corresponding trajectory within 12.5 µs.
|
|
| ... products without technical information |
| |
laser engraving machine
Spirit
- Extendable to 29 in. X 18 in. (740 mm X 460 mm) work area
- Patented SmartACT innovation to reduce ramping and increase productivity
- Plug-and-play standard USB port for rapid data transmission
- DC servo motor for precise movement of laser carriage
- SmartLight light module to illuminate the workspace
- SmartLid top lid device for easier access from both ends
- SmartBox cutting accessory for flexible cutting jobs
|
|
Venus II
- The most compact laser engraver
- Standard Auto Focus gauge for precise focal length and delicate laser output
- Air ventilation design delicate for stamp making industry
- Window-based driver interface for easy operation
- Standard functions as large laser systems
|
|
Laser Marking System
S290
LaserPro S290 : Full Table Size Metal Marking System with the Largest Working Area
- Spacious 29" x 18" working area
- DC servo control for precise and rapid movement
- Superior engraving quality
- DPSS laser technology for metal and plastic engraving
- User-friendly features
- Auto power compensation
|
|
Optimize tool stock and purchasing
Master efficiently stock control and tool quality.
With the WinTool Logistic module you can manage tool components anywhere in the MFG process. Using the interactive dialog, barcodes and 'batch booking', you efficiently book tools to cost centers or machines. The browser based user interface can be easily customized for data entry hardware like wireless barcode scanners: this equals quick and error-free stock management. WinTool calculates purchase requisitions automatically (minimum stock) and you easily revise orders in the elaborate shopping cart. Delivery date control secures availability and data analysis is the basis for optimizing technical tool quality and assortment..
|
|
CNC-Production Data Management
Integrated database for technical data storage and error-free workflow in CNC-manufacturing.
NC-program, fixture specification, tool list, zero point information, measuring data, etc. are always up-to-date and clearly kept in WinNC-folders. Whether the production data has been generated on a machine control or a software application, all file formats are supported in WinNC and can be retrieved with your preferred application. The WinNC NC-Editor with powerful features helps to easily edit or compare NC-programs that can be transmitted via the integrated DNC-Interface. Configurable user rights and software functions ensure robust performance of WinNC in your company network.
|
|
WinVector: CAD-drawings done professionally
The powerful 2D CAD is now even suited for simple 3D tasks
WinVector has extensive CAD features and is nonetheless a very comprehensible tool, so that even frequent users can handle it very well. All functions can be accessed quickly by mouse or keyboard shortcuts. Simultaneously you can open multiple drawings and detail-view windows. The intuitive software design and intelligible Help feature make you a professional WinVector user in no time.
|
|
WinVector workshop near CAM
Vector CAM
They work very practice-orientedly and are annoyed at complicated software?
WinVector is nevertheless very simple a high performance CAD/CAM program system and in the operation. Already after few hours you are with the software trust and provide in shorten first time NCs-Programm. Step by step you develop these. With the used function and cut to your machinery. No reorientation and no pre-defined operational sequence are required. The result is "it" NC-Programm, as provides by hand. However importantly faster, more simply and more comfortably!
|
|
Spirit GX
-38"x24" (960 x 610 mm) extra large working area.
- QSM (Quality Speed Mode) maintains 100% engraving quality while operating at maximum speed.
- Patented SmartACTTM motion control technology increases your productivity by reducing ramping process and job running time.
- Drag and Engrave feature assures remarkable easy and fast set-ups.
- High speed DC motor for precise and rapid movement of laser carriage.
- Linear guide for exceptional precision under high speed.
- Pass-through front and rear doors to accommodate long work pieces.
|
|
Laser Cutting System
Gaia
Developed on the basis of LaserPro's accumulated technology and innovation in past years, LaserPro Laser cutter is a dedicated design to fulfill your cutting and engraving needs.
- 51" x 36" (1300x916mm) working area.
- Adjustable acceleration enables higher productivity.
- AC Servo Motor Technology for precise movement control.
- Laser Pulsing Technology for accurate laser firing control.
- Excellent engraving quality.
- Easy maintenance.
- AAS Module the automatic graphic contour tracking system.
|
|
StellarJET UV-curable Inkjet Printer
GCC StellarJET 183UVK is a high-capability and high-resolution UV Curable Inkjet Printer which is capable of printing directly on both rigid and flexible substrates up to 1830mm (72 inches) width, and 25.4mm (1 inch) thickness. Hybrid media handling system includes built-in flatbed and auto roll-fed from both rigid and flexible media. The innovative StellarJET 183UVK fulfills most printing application and is the best choice in the market at this range.
|
|
StellarJET 250UV
- Dedicated White Ink
- Intelligent Auto Media Calibration (AMCTM)
- Acceptable media thickness up to 50 mm
- Continuous Ink Supply System
- Hybrid Media Handling System
- Industrial Strength and Productivity
|
|
Power E (4 axis numeric controller)
Cheap solution “All In One” achieved with a coloured touch screen interface for low budget applications. Available with display 6,5”, 8,4”, 10”, 12” and 15” with or without touch screen. Besides axis it can manage “on board” up to 48 digital I/O and 12/12 bit analog inputs all in a very compact electric board. At the moment, it’s the only Tex Computer’s controller with USB interface integrated.
|
|
|
Delta carries a variety of signal conversion peripherals. Signal conversion peripherals are used to match the signal levels and signal types between components in your motion system. For example, you can convert a voltage drive output to a current drive output in order to control a servo valve. While these products have been designed to satisfy requirements of Delta motion control products, they can be used in any system.
|
|
|
|
|
|
Color is one of the last qualities still being checked by human eyes in most applications. Color sensors such as the CS24D are changing this. Electronic color sensors are increasingly being used in automated applications to reduce automation errors and improve quality at production line speeds.
Delta's color sensors and sorters are based on our patented pulsed LED technology and offer the benefits of rugged, long-life, solid-state lighting with a wide range of colors from blue to near-infrared.
While most color sensors use a single white LED and filtered detectors, Delta's color sensors are different. They use multiple ultra-high intensity LEDs for smooth, bright lighting and unfiltered large-area precision photodiodes for better signal-to-noise ratio. And the resulting large sensing areas provide superior performance on textured materials.
Be confident the color you want is traveling down your production line. Delta's color sensors provide superior performance in a wide variety of applications, even with textured and other difficult materials.
|
|
Automatic Tool Drawings
Just record data in WinTool library and the exact, measured component drawing will be generated
In order to graphically assemble tools in WinTool full-scale component drawings are required. With the WinTool DXF Generator you no longer have to draw tools yourself - even in case tool catalog or supplier data is not available. You can now generate tool component drawings fully automatically directly out of the geometry values entered in WinTool. This works not only instantly but also verifies data entry accuracy and guarantees zero-mistake data quality of your tool library. WinTool software uses the commonly used DXF-format according to ISG/BMG standards.
|
|
Cutting Plotter
Jaguar
- DC servo motor technology
- Tri-port interface connectivity
- Up to 600 grams cutting force
- Up to 60 inches per second cutting speed
- Up to 0.8 mm(0.03 in.) media thickness
- Guaranty 10 meter tracking
- User friendly, multi-language control panel
- Ingenious media basket
- Accu-Aligning System for contour cutting(AAS)
|
|
Automatic Tool Drawings
Just record data in WinTool library and the exact, measured component drawing will be generated
In order to graphically assemble tools in WinTool full-scale component drawings are required. With the WinTool DXF Generator you no longer have to draw tools yourself - even in case tool catalog or supplier data is not available. You can now generate tool component drawings fully automatically directly out of the geometry values entered in WinTool. This works not only instantly but also verifies data entry accuracy and guarantees zero-mistake data quality of your tool library. WinTool software uses the commonly used DXF-format according to ISG/BMG standards.
|
|
|
The user friendly Tool Management System WinTool Basic Module lets you integrate tool data in NC-programming, tool crib, and ERP in only one solution for all departments and allows the redesign of efficient and robust tooling processes in CNC manufacturing! WinTool is an online solution for optimal tool management. The tool library stores tool geometries, graphics, 3D solids, and cutting data which you can access from you CAM system and presetting gauges per WinTool Interface Modules. WinTool also generates tool lists including tool graphics directly out of NC code and calculates net tool lists for machine magazines. WinTool Logistics organizes your tool crib, suggests purchase orders and can be easily integrated with your ERP system. With the WinTool Index Module you can secure tool data with revision control and track their history
|
|
CNC-Production Data Management
Integrated database for technical data storage and error-free workflow in CNC-manufacturing.
NC-program, fixture specification, tool list, zero point information, measuring data, etc. are always up-to-date and clearly kept in WinNC-folders. Whether the production data has been generated on a machine control or a software application, all file formats are supported in WinNC and can be retrieved with your preferred application. The WinNC NC-Editor with powerful features helps to easily edit or compare NC-programs that can be transmitted via the integrated DNC-Interface. Configurable user rights and software functions ensure robust performance of WinNC in your company network.
|
|
The Dytran pressure sensor model 2180C is a high intensity acoustic sensor ideal for measurements involving gas turbine combustor dynamics. It features a top TNC electrical connector, a 1-1/8-12 mounting thread, and a stainless steel diaphragm. The 2180C has a charge sensitivity of 700pC/psi and a range of 10 psi (191dB). This all-welded stainless steel sensor can monitor pulsations, turbulence, a noise in hydraulic and pneumatic systems as well as detect pressure fluctuations in exhaust systems, compressors, turbines, pumps and pipelines. To learn more about the 2180C, please visit the Dytran website or email us.
Key Features
- Top TNC connector
- 700pC/psi sensitivity
- 10 psi (191dB) range
- Charge mode
- Can operate up to +400°F
- All stainless steel construction
- Hermetically sealed
Potential Applications
- Gas turbine combustion dynamics studies
- Pressure fluctuation measurements in exhaust systems, compressors, turbines, pumps and pipelines
|
|
Endevco® Model 2222C is the industry's best selling minature piezoelectric accelerometer, for vibration measurement on small electronics, consumer products, and mini or delicate structures. Its very low weight (0.5 gm without cable) effectively minimizes mass loading effects to the test structure. accelerometer is a self-generating device that requires no external power source for operation.
Model 2222C features Endevco’s Piezite® Type P-8 crystal element, operating in the radial shear mode. This sensor exhibits excellent output sensitivity stability over time. Signal ground is isolated from the mounting surface of the unit by a hard anodized surface. A specially designed low noise coaxial cable is supplied for error-free operation. Unit and cable removal tools are included in the package to ensure proper removal in the field.
Endevco signal conditioner Models 133, 2775B, or Oasis 2000 computer-controlled
system are recommended for use with this high impedance accelerometer.
|
|
| ... products without technical information |
| |
· Definition : 200 °C heating plate for all applications.
· Construction : heating plate in rectified duraluminium, covered with PTFE
(Polytetrafluoroethylene, Teflon). Exterior housing in stainless steel.
· Insulation : thermal separator in stainless steel.
· Heating : heating components distributed throughout the heating surface.
· Electricity : Single-phase 230V, 50Hz.
· Regulation : PID temperature controller. Digital setting of temperature.
· Safety : built-in alarm and fixed over-heating limiter.
· Documentation : certification CE and operating instructions in English.
|
|
|
|
see the results for the following category : 
