|
|
|
|
|
|
QUICKSHAFT® Linear DC-Servomotor series LM 1247
NEW TECHNOLOGY
Up to 9,4 N impact
Boasting a slimline design of 12.5 x 47 mm and a weight of only 56 grams, at full power this drive provides an impact force of 9.4 N. For the standard product the travel is 20 mm; optionally travel up to 80 mm is also available. The Linear DC-Servomotor comprises an electromechanical part, a metal housing made from a non-magnetic alloy, a coil and an analogue Hall sensor. A precision sliding metal rod equipped with a permanent magnet completes the linear motor, and together they make a dynamic, high-performance drive in a modern design.
The activation of these new QUICKSHAFT Linear motors is provided via the optimally matched motion controllers of the MCLM 3003/06 series, which are also available with a CAN interface. The free FAULHABER version 3 "Motion Manager" software provides rapid and easy control of the linear motor. In numerous applications this newly developed drive has proved itself to be the best-in-class solution for highly demanding linear movement and positioning tasks.
|
|
MSK Series
This series offers complete scalability, with performance options for standard and more challenging applications. The compact construction with increased torque density provides a costomer-orriented range of size and performance.
|
|
|
These low-pole AC servo motors of the ECOSPEED series stand out due to extremely low torque ripple at low speed. Torque from 1 - 26 Nm. Flange dimensions 60 mm, 80 mm, 110 mm, 130 mm. Rated speed depending on series between 1500 and 5000 rpm. Available with incremental encoder or absolute value encoder. Holding brakes from 0.5 - 10 Nm (optional). Certified version according to ATEX directive 94/9/EG for use in hazardous locations. Also available as hollow-shaft built-in motor. Approvals: UL/CSA, CE.
|
|
B&R 8LS three-phase synchronous motors have been specially developed for use in high-performance applications. They are now being used to produce consumer goods and products in the plastic, packaging, metal, food and beverage industries and then palletize them with material handling systems. Complete solutions from one source: this requires the right components as well as the right configuration for the application environment. The large selection of available 8LS three-phase synchronous motors makes it possible to easily meet conditions such as reducing the variety of parts, guaranteeing ease of service and maintaining minimum requirements on space.
An optimally configured drive rounds off a successful design. To meet this goal, specialists are available in B&R subsidiaries all over the world who are eager to share their know-how in the area of mechatronics. B&R automation components: the economical combination of mechanics, electronics, technology and innovation.
|
|
Electrical drives and couplings
Our range includes AC/DC linear drives, DC motors, AC/DC servo drives and frequency inverters. The range of couplings includes torsionally flexible and torsionally rigid couplings.
Servo motor A+P type ABL
Servo motor A P type ABK
Servo motor A P type HR
Servo motor A P Type HRS
Servo motor A P Type HJ
Servo motor A P Type HDM
Servo motor A P type AF
|
|
AC-servo motors for highly dynamic applications
Design "M.GN series," brushless, permanent excited, three-phase servo motor
Main applications machine tools, textile machines, printing machines
Special applications handling, dosing, winding and paper machines
Performance range with 3000 s/min. / 0.5 - 52 kW
Size 70 - 190
|
|
|
Control Retrofits: Drake's new CS:R system is ideal for N/C or CNC cylindrical, surface, universal, thread, internal and external grinders as well as hobbers. 1/2 the cost of a remanufacture; 1/3 the cost of a new machine. The system gives you unmatched control, reliability, productivity, easier set-up and quicker changeover. Digital Servos with Million Count Encoders. Superior velocity and position control are provided, along with A.C. permanent magnet and digital servos with one million count feedback resolution.
|
|
|
YASKAWA Electric's technology and products are used in diverse fields from electronic component mounting systems to machine tools, general industrial machinery and even medical equipment. Representative examples are machine controllers contributing to the creation of value-added machinery and enhanced information utilization, AC Drives being key to achieving automation and reduced energy consumption, and servomotors crucial to so many machines. YASKAWA's advanced mechatronics equipment and rich expertise in motion technology makes a real contribution to improved speed and precision industry worldwide. Providing solutions to our customer's machine design needs, YASKAWA Solution Center can understand the concepts of our customers and provide a variety of optimized component product solutions.
|
|
SGMM Sigma Mini
Rated Output: 10W, 20W
The SGMM servomotor series is designed for precise control of very small loads. Two motor sizes are available in 10 or 20 watts with a flange size of 0.98 inches (25mm). 24 VDC windings are available with maximum speeds of 5,000 rpm. An 8,192 ppr incremental encoder is standard. The SGMM is rated IP55 (not including the shaft). Options include a holding brake and shaft with or without a flat.
|
|
ARC's complete line of AC Servo Motors are designed to meet the requirements of MIL-S-22432 and SAE ARP-497. These tow phase AC Servo Motors range from size 8 to 23. These miniature squirrel cage motors operate at 60 Hz or 400 Hz and are available in 2, 4, 6, 8, and 12 pole designs. Custom units that operate at other frequencies are available.
These two phase A.C. Servo Motors range from size 8 to 23. The miniature squirrel cage motors operate at 60 Hz. Or 400 Hz. And are available in 2, 4, 6, 8, and 12 pole designs. Custom units that operate at other frequencies are available.
|
|
ASM series asynchronous servomotors:
• robust squirrel-cage rotor
• field weakening range to 8000 rpm with constant output
• integrated PTC
• terminal box
• shaft with feather key
• vibration severity grade N to DIN ISO 2373 (optionally grade R possible)
• outstanding value for money
|
|
Servo Motors
AC Brushless Servo Motors
Use our Servo Motor Virtual Ship program and have your Servo Motor order shipped within 5 days ARO!
- MDM-5000 Brushless Servo Motor
- Stainless Steel Brushless Servo Motor
- Food Grade Brushless Servo Motor
- N-Series Servo Motors
- H-Series Servo Motors
|
|
|
Kollmorgen's brushless servomotors are designed to operate over a broad range of speeds and have the advantage of reduced maintenance since there are no brushes or commutators. DC brushless motors offer superior performance with our highest torque/inertia ratio and high speed capability of up to 20,000 rpm for typical designs (up to 70,000 rpm for special designs). Our linear brushless motors can exceed 10 m/s.
|
|
|
|
|
|
Servo Dynamics IB Servomotor provides applications with low inertia to attain the highest acceleration capability – to allow you to position faster. The IB series is used in the world's fastest machines and demanding applications. IB Servomotor provides low inertia and high torque desired for excellent performance response, and is a rugged, durable design, they have heavy duty continuous operation for dependability and assurance that it will always perform, and high acceleration capability to move faster, and high torque to inertia ratio enables the machine to produce more parts per hour. And winding potted for high voltage protection and for improved reliability and improved heat transfer.
The IB brushless servomotors provide a very responsive acceleration in a rugged, durable design with high energy Neodymium-Iron-Boron magnetics. This series provides continuous stall torque capability ranging from 3.9 Lb-In (0.45 N-m) to 117 Lb-In (13.3 N-m). Peak torque capability is nominally 4 times continuous. This series has the lowest inertia to provide the maximum torque per package size.
|
|
|
|
|
|
All of Teknic's motors are brushless AC servo motors with integrated encoders. Neodymium-Iron-Boron magnetic material is used to attain high power density while maintaining a low cost per watt. These high power density motors help increase throughput even when available space for the motor is constrained. The magnetic design of the motors includes skewed stators and/or rotors for minimum cogging torque and low torque ripple.
Since the motors are brushless, the only parts in mechanical contact are the shaft bearings. The bearings are oversized, single row, deep groove radial bearings with non-contact lubrication seals. The large ball bearings have diameter variations of less than 15 millionths of an inch, and the steel used is vacuum-degassed and heat-treated for maximum endurance. Thus, these motors are exceptionally reliable.
Teknic offers brushless servo motors in two lines: Instrument grade and Industrial grade. Instrument grade motors are value-engineered, high-torque motors intended for typical lab environments or where the motors will be reasonably protected from harsh environments. Industrial-grade models are robust, sealed motors perfect for harsh environments.
|
|
Rated torques from 0.5...4.3 Nm in three sizes
Compatible with planetary gears
Designs with parking brake
Samarium-cobalt magnet systems
Motor shaft with key
|
|
FS synchronous servomotors (FSA and FSP series) are small brushless AC with permanent magnets. They are ideal for any application requiring great positioning accuracy. These motors are exclusively servo driven by Innova series drives MCSi and MCPi.
General characteristics:
* Highly reliable uniform output torque and low maintenance.
* Mounting flange of 40, 60, 80 and 120 mm square.
* Rated torque of: 0.32 - 0.64 - 1.27 - 2.39 Nm.
* Maximum speed of 5,000 rpm.
* Incremental or absolute encoder.
|
|
BGK-Economy-Servo motors with
integrated digital AC-servo regulator DIS 48/15
The low-cost system makes the use for modern drive technology possible at small prices even in ranges, where we thought until now, that a use of servo systems is from cost reasons not conceivable.
The decentralized structure of the system makes the installation very easy.
- no complex wirings
- no expensive motor leads
- conceivablly simple Plug & Play.
|
|
|
|
|
|
M-Series Servo Motors
ORMEC’s M-series AC brushless servo motors provide high torque-to-inertia ratios and excellent continuous torque and peak torque performance in a compact design. These industrial quality servo motors incorporate high performance neodymium permanent magnets and a highly efficient stator winding design which results in excellent power density while maintaining low cogging characteristics.
Key Features
* Continuous Stall Torques from 1.4 to 248 in-lb (0.16 to 28 N-m)
* High Peak Torques from 4.4 to 557 in-lb (0.5 to 63 N-m)
* Output Power from 50 to 4,400 Watts (0.07 to 5.9 HP)
* High Maximum Speeds from 3,000 to 5,000 RPM
* Incremental Encoder resolutions up to 24,000 counts per revolution
* Optional Absolute Encoders feature multi-rev operation up to 1,048,576 cts/rev
* Class F Insulation over Class B temperature rise provides additional thermal headroom
* Minimum Torque Ripple & Cogging for smooth low-speed performance
* Totally Enclosed Non-Ventilated (TENV) standard IP-65 except shaft opening
* Optional Fail-Safe holding brakes
The M-series servo motors also completely eliminate brush wear maintenance problems, and feature extremely durable construction which includes heavy duty bearings. Rugged MS connectors provide reliable interconnections to both motor and optical encoder.
|
|
Series FXM:
This synchronous motor series with permanent magnets offers unmatched dynamic characteristics, sturdiness and great acceleration capability.
Velocity feedback is obtained through an encoder.
They may also have an optional brake and/or shaft with keyway.
|
|
# Peripheral operation, minimized installation needs
# Versions for operation at 24VDC and 48VDC
# Compact and powerful design
# Versions with CANopen interface acc. to CiA DSP 402 V2.0
# Versions with incremental output 1024/rev. RS422 A-,B-,Z-signal
# Dynamic speed control and positioning
# To combine with planetary gear GPK45/55 (1-, 2-stages; up to i=49:1)
# Parking brake available
# High protection class IP54 (IP65 as an option)
# Maintenance free and robust
# Customer specific design
|
|
|
|
|
|
Brushless DC Servomotors has very low cogging torque to meet the industrial requirement. They are designed with NdFeB magnets. They can have high power and torque density, and small size structure. Without the mechanical communication, motor speed can be over 10,000RPM. Wide speed range, low rotor inertia, low EMI, no brush maintenance, no brush dust are Brushless DC Servomotor benefits. It is the best selection to improve your products.
1. Internal Permanent Magnet (IPM) rotor design to avoid the surface mount magnets disadvantaged.
2. Patented rotor structure to have super low cogging torque performance for IPM servomotor.
3. No skewed slot on stator and rotor, it can increase reliabilities and reduce product costs.
4. Energy efficiency motor adopts the high magnetic energy permanent magnet NdFeB to have high power and torque density, and small size structure.
5. Electrical commutation can perform low noise, low EMI and no brush maintenance.
6. Lower rotor inertia and good heat dissipation, windings of Brushless DC servomotors are in the stator. In a brush-type motor, the winding is in the rotor.
7. Power and torque density are much higher than the conventional motors.
8. Without mechanical commutation, motor speed can be over 10,000 rpm.
9. The innovating structure has an excellent feature in energy saving during heavy-load operation, and high torque at low speed driving. The high efficiency range is much wider than conventional motors.
10. Standard Servo motors are built with NTC thermistor for motor temperature feedback.
|
|
DC Brush Servo Motors
DC Brush Servo Motor Platform 2100
- 2105 Servomotor
- 2110 Servomotor
- 2115 Servomotor
- 2120 Servomotor
- 2130 Servomotor
DC Brush Servo Motor Platform 2600
- 2605 Servomotor
- 2610 Servomotor
- 2615 Servomotor
- 2620 Servomotor
- 2630 Servomotor
- 2640 Servomotor
DC Brush Servo Motor Platform 3500
- 3505 Servomotor
- 3509 Servomotor
- 3515 Servomotor
- 3528 Servomotor
DC Brush Servo Motor Platform 4100
- 4101 Servomotor
- 4102 Servomotor
- 4104 Servomotor
- 4106 Servomotor
DC Brush Servo Motor Platform 40TT
- Drop in replacement for the discontinued Kollmorgen* TT Servo Motors
- Matched Windings, Connections, and Mechanical Interface
- Heavy Duty Steel Housing for Demanding Service
- Full Performance Testing Included
- Resonably Priced, Excellent Value
- Reliable Operation in Sever Service
|
|
Danaher's family of DC motors offers an extremely wide variety of size and package types. From frameless pancake motors to high acceleration housed/shafted motors, Danaher offers the most complete range of high performance motors available today.
Pacific Scientific PMDC motors offer rugged, quality construction providing dependable operation. A well deserved reputation for value, these motors are backed by a two-year warranty.
Kollmorgen ServoDisc™ Brush Motors differ from conventional DC servomotors in their unique slotless disc armature design. This enables them to deliver a concentrated level of performance, in both incremental motion and continuous speed that is not attainable with conventional ironcore motor designs.
Direct Drive DC Torque Motors are particularly suited for servo system applications where it is desirable to minimize size, weight, power and response time, and to maximize rate and position accuracies.
|
|
DC1500:
Brushless direct current motor in compact design for flange mounting with integrated incremental encoder
- Pnom = 400W;
- Mmax = 3 Nm;
- Nmax = 9000 rev/min
DC1550:
Brushless direct current motor in compact design for flange mounting with integrated incremental encoder
- Pnom = 600W;
- Mmax = 8 Nm;
- Nmax = 5000 rev/min
|
|
DC-motors
* Good efficiencies, high peak load through the use of premium ferrite materials and optimized magnet systems
* High-quality design
Steel tube housing, externally accessible brushes
* Versatile compatibility
Well-graduated gear series, parking brakes, tachometers and incremental encoders
|
|
Custom windings are available on select SmartMotors. These special windings allow SmartMotors to achieve higher speeds or greater torque.
Custom shaft lengths and diameters are available on select SmartMotors. Flats and keyways are common options found on motor shafts. SmartMotors can be purchased with various versions of these shaft modifications.
Torque vs. Speed curve data is derived under dynamometer testing using a power/battery supply at an ambient temperature of 27°C (80.6°F).
Connector kits and cable options are available.
SmartMotor servos have CE certification.
|
|
|
|
|
|
Integral, high torque density servo drive with Canopen interface and absolute multiturn positioning.
Universal 350 and 550 Vdc bus supply
2.5-9 Nm torque, 5000 rpm max
Multi axes machines
Direct drive without gearbox
Intrinsic multiple electric gear
Built in single turn and multi turn 4096 turn + 16 bit absolute encoder, 1 arcmin accuracy
No zeroing cycles
CanOpen DS301, DSP402v2.0 compatible
Double insulation
Built in RFI filter, Class B
IP 68 protection
The new TorqueWire series of integral servo systems creates a different approach to complex automatic machinery architecture. Torquewire motors are complete, self sufficient servo axis building blocks which allow the design, integration and operation of large multi axis systems with minimum hardware and surprising ease.
The TorqueWire motor systems consist of an advanced, high performance rare earth brushless servo motor, a DSP based, high voltage interpolating servo drive and a single or multi turn absolute encoder, all assembled in a very compact IP 68 protected frame.
|
|
PANdrive PD-163-42
Description
42mm BLDC motor with integrated controller/driver
The PD-163-42 is a full mechatronic solution including a 42mm brushless DC motor (NEMA17). It combines a convenient BLDC controller/driver electronic (TMCM-163-42) with a range of different motor types with internal HALL sensors. The PD-163-42 offers two motor torque options and can be controlled via RS232 or RS485 interface. The power supply is connected via flat connectors and the interface and the multi-purpose I/Os can be connected via high density JST connectors. It integrates a position regulator and a ramp generator. The integrated ramp generator provides for parameterized smooth positioning and supports an external switch as an absolute position reference.
|
|
|
|
|
|
The IG series DC brushless three-phase servomotor delivers high continuous torque in a cost reduced package.
The increased torque is the result of eight magnetic poles on the rotor compared to the traditional four magnetic poles. This design uses neodymium magnets for maximum performance. The IG series has an open-lamination design reducing cost. This series come with NEMA standard flanges size 17, 23, 34, and 42 with continuous torque rating from 25 to 820 oz-in (0.18 to 5.80 Nm).
An optical encoder having A, B and C encoder tracks and uvw commutation tracks comes standard with the servomotor. Encoder resolutions available are 500, 1000, 2000, 2048, 4096, and 8192 ppr (pulse per revolution).
The servomotor is designed with a 40 in (101.6 cm) shielded/grounded power and encoder cable extending from the rear of the servomotor for fitting into those tight locations.
Both IP 40 and IP 65 are available for the environmental rating. All models are available with gear heads.
The motors are available with and without a build-in holding brake. The motor length and specifications would vary if a servomotor with a brake is chosen.
|
|
|
|
