|
|
Aerotech manufactures drives for a wide range of industrial automation applications. Our drives power our own servomotors and complement Aerotech motion controllers in applications as diverse as industrial robots, vision systems, assembly machines, machine tools, semiconductor manufacturing equipment, electronic manufacturing, and in a variety of other industrial control solutions. Aerotech drives, controllers, and linear and rotary servomotors are perfectly matched to provide the ideal solution to your motion control application. Aerotech drives are available in PWM and linear output, with from 10 to 150 amps peak current.
|
|
Aries
Plug in and spin -- no set up required; drive auto-configures when used with Compumotor''s "smart encoder" motor
+/-10V torque or velocity control -- use any controller with a standard /-10V input
Step and Direction option
7 versions available -- up to 3000 Watts and 16 ARMS continuous, 48 ARMS peak
Supports Encoder, Smart Encoder, Heidenhain Absolute encoder and Resolver feedback types
ViX Servo Drive
Up to 80VDC bus voltage
Outputs of 2.5A RMS continuous and 5A RMS continuous
Compact size: 4.9 x 1.65 x 3.35 inches
Resolver or encoder feedback
Standard RS232C interface
Analog, Step & Direction and Encoder command signals
CE (EMC & LVD)
Compax3 Servo Drive
Available in both 120/240 VAC and 480 VAC input versions
Current output from 2.5A RMS continuous to 155A RMS continuous
Certified Category 3 Safety (EN954-1 Cat. 3)
Programs in all five IEC61131-3 International programming standard
Scalable control technology: preset indexer to fully programmable
Advanced following and camming support
Support for SSI feedback for additional load control
Resolver, Encoder, Sine-Cosine or Stegmann feedback
Multiple fieldbus options, including DeviceNet
Internal regeneration circuitry with external resistor connections
Easy-to-use wizards-based configuration via C3 ServoManager(TM)
Full diagnostic, tuning and 4-channel oscilloscope features provided in the standard C3 ServoManager(TM) software
CE (EMC & LVD)
... |
|
Galil's AMP-19540 is a 4-axis amplifier for driving brush or brushless motors up to 500 Watts. By interfacing directly to Galil's DMC-18x2, DMC-18x0, or DMC-18x6 controllers, it provides a cost-effective controller/drive solution for multi-axis applications. The AMP-19540 contains four transconductance, PWM amplifiers for driving brush or brushless motors. Each amplifier operates at 18V to 80V dc, up to 7 Amps continuous, 10 Amps peak. The AMP-19540 gain setting is easily configured with jumpers. The PWM switching frequency is 60 kHz.
The AMP-19540 enclosure has dimensions of 6.8" x 8.75" x 1". It interfaces to Galil's DMC-18xx PCI bus controller with a single, 100-pin high density SCSI cable. Signals for each axis are brought out through D-type connectors located on the AMP-19540. For applications with less than three axes, the AMP-19520 two-axis model is available. A shunt regulator option is also available. |
|
Yaskawa Sigma and LEGEND servo amplifiers have all-digital architecture with 32-bit microprocessor logic, high speed ASIC current-loop control, and IGBT power sections.
All Sigma and LEGEND amplifiers have serial encoder feedback with automatic motor recognition, expansion ports for addition of single-axis controls and network interfaces, separate main and control power connections, scalable encoder retransmission, sine-coded PWM output waveforms, full thermal overload protection of the motor, and UL, CE, and TUV certifications. Where required, Yaskawa amplifiers have built-in regenerative and dynamic brake resistors.
Yaskawa amplifiers are matched with Sigma motors with high-resolution serial encoder feedback to provide low velocity ripple and speed loop bandwidths exceeding 400 hz. These features allow very smoth motion at low speed, higher load-to-rotor inertia rations, and decreased setting time. |
|
Control Modes Indexer, Point-to-Point, PVT
Camming, Gearing, Position, Velocity, Torque
Command Interface CANopen/DeviceNet
ASCII and discrete I/O
Stepper commands
+/-10V velocity and torque command
PWM velocity and torque command
Master encoder (electronic gearing)
Communications CAN
RS232
Feedback Digital quad A/B encoder
Secondary encoder / emulated encoder out
Analog sin/cos encoder
Resolver (-R version)
Digital Halls
I/O - Digital 12 inputs, 4 outputs
Regen Panel: external resistor dissipation
Micro Panel: internal dissipation
Accessories External regen resisitors
External edge filter
Dimensions Panel: 191 x 140 x 64 mm [7.5 x 5.5 x 2.5 in]
Micro Panel: 126 x 90 x 53 mm [5.0 x 3.5 x 2.1 in] |
|
The BR & BRS SERIES are Servo Dynamics premier Brush Servo Amplifiers and are built with the same reliability and quality that you have come to expect from all Servo Dynamics products.
|
|
Servo inverters with four different technology variants and matched synchronous and asynchronous servo motors ensure an ideal solution for every application.
9400 Servo Drives :
- power range 0.37 to 370 kW
- 3 x 400 ... 500 V
- HighLine
- high modularity
- drive-based safety
9300 servo inverters :
- Servo inverters in the power range from 0.37 to 75.0 kW;
- 3 x 400/480 V; 4 technology functions: servo inverter; position controller; cam profiler; register controller |
|
Programmable Servo Controllers featuring Graphic Monitoring facilities
• 1, 2 and 3 kW
• Compact and programmable
• Built-in RS232/RS485 Interface
• 11 inputs, 8 outputs
• Uses programmable FLASH-PROM
• CANopen and CAM profiles included
• Separate logic voltage
• Current overload protection
• Short-circuit and thermal overload protection
• Simple programming with MotoWare
• High resolution electronic gearing
• Facility for graphic monitoring
• EMC tested, built-in mains filter
• Mains supply from 1x115VAC to 3x400 VAC
JVL´s new AC Servo Controllers provide many facilities, including very high resolution electronic gearing, built-in sequential program execution, 64 registers, 11 inputs and 8 outputs. The Controllers utilise FLASH PROM for easy upgrades and are CE approved. Programming is easy and very straightforward using a PC and JVL´s programming software, MotoWare. In addition motor operation can be monitored graphically, thus greatly aiding control and troubleshooting.
|
|
MELSERVO - Servo technology that does more
Servo Amplifiers: MR-J2S-A, MR-J2S-B und MR-J2S-CL
Mitsubishi offer a wide range of Servo amplifiers to meet the demands of all types of applications. From standard digital pulse and analogue controlled amplifier through to dedicated SSCNET bus type amplifiers, there is a product for all circumstances.
• Real-time autotuning
• Compact design
• Communications capability with RS232/RS485
• Automatic motor type recognition
• Multiple operation mudes (MR-J2S-A)
• Built-in positioning control (MR-J2S-CL)
• 4 different motor types available
Servo Motors: HC-KFS/ HC-MFS/ HC-SFS/ HC-RFS
Mitsubishi Servo Motors are made to high standards and offer a wide range of power, speed and inertia ratings providing a motor for all applications. Ranging from 50W through to 55kW and with specialist type motors available (flat “pancake”motors) the new Super Series Servo Motors complete the line-up of products offered by Mitsubishi Electric. |
|
Together with BSH servo motors, Lexium 05 servo drives are compact and dynamic servo drives for machines with various power ranges and diverse supply voltages.
Lexium 05 servo drives:
100…120 V single phase, from 0.4 to 1.4 kW
200…240 V single phase, from 0.75 to 2.5 kW
200…240 V 3-phase, from 0.75 to 3.2 kW
380…480 V 3-phase, from 1.4 to 6 kW
BSH servo motor:
Nominal torque: from 0.5 to 36 Nm
Nominal speed: from 1500 to 8000 rpm |
|
| Drivert-300 is a digital mechanism with PWM system at 6.25 KHz with sinusoidal output current. It provides high performance standards for the control of SPEED, TORQUE and POSITION of synchronous permanent magnet (Brushless) servomotors up to 300 W. |
|
EBL-H-50-03 Amplifier (Hall Sensor)
Specially engineered for Portescap high performance Brushless motors, the EBL driver is ideal for applications where efficiency, high acceleration or safety features are key. Clearly identified inputs and outputs allow for easy startup.
Flexibility: Fully programmable features allow for maximum performance in each specific application. With a broad supply voltage range, this driver is capable of controlling the smaller 13 mm BLDC motors to the larger 30 mm motors.
Protection: Thermal, short and over current protection are included. An optional feature allows for current limitation at start up to protect surrounding equipment (i.e: the life of a battery pack in a medical respirator will be greatly improved). The internal current ripple control minimizes increases in motor heat.
Electrical Characteristics
Supply Voltage 5.5 - 50 V
Current Output 3 / 12 Amps
Speed Range 90,000 (2 poles)
|
|
| All-in-one motion control system. Combines a PLC, a sequential motion controller and AXIOM drive technology. Less space requirements with fewer components to wire and program. Intuitive set-up and configuration software for easy set up. ASCII and Modbus RTU interface. |
|
| High-speed accuracy with user friendly set-up and diagnostics. State-of-the-art DSP controlled digital vector commutation optimizes bus voltage for improved speed/torque curves. Flux vector current control improves motor efficiency by providing more torque over the full speed range than is possible with traditional sine drives. Available in 10, 20 or 30 Amp peak ratings (3 sec). Convenient pluggable screw terminal connectors for fast, easy set-up and installation. Set-up software employs a straightforward "control-panel" approach, making it easy to get up and running fast. |
|
Modern Technology in Miniature Format
High efficiency
Unique temperature supervision
|
|
- High Performance at Low Cost
- Integrated Driver, no External Amplifier Required
- Stand-Alone Functionality
- Daisy-Chain Network for Multi-Axis Applications
- Easy Address Setting
- Macro Command Language
- Non-Volatile EEPROM for Macros and Parameters
- Parameters can Be Changed On-the-Fly
- TTL Inputs for Limit & Origin Switches
- Motor-Brake Control
- Additional TTL I/O Lines
The Mercury™ Palm-Top DC-Motor Controller is the perfect solution for motion control applications where a precision positioner is to be controlled by a PC or PLC (programmable logic controller). |
|
Control electronics for DC and EC motors
1 and 4-quadrant servoamplifiers
Positioning control units
- MIP
- EPOS
Characteristics
- Matched to maxon motors
- Comprehensive range of cables and accessories available
- Customization if required
|
|
EC 750 is a new and unique BLDC motor controller for the growing market of energy saving fans etc. It is also a SENSORLESS controller, so the need for positioning sensors in the EC motors are past….
Compared to traditional Frequency inverters and AC motors, the new
EC 750 and attached BLDC motor can save between 20-30% of energy.
It is a GREEN product that meets new environmental demands around the world. Moreover, EC motors have a flat characteristic, so the moment of inertia is almost constant during the controllable speed range.
EC 750 employs the newest "state of the art" technology within sensorless control of BLDC motors, and will be best suited for environmental demands in the future. Saving energy, saving the planet, saving money …
Motors have to be matched to the controller for optimum performance and energy savings. Motron works together with suppliers of this kind of motors and will support this part as well.
EC 750 comes as a “plug and play” unit. Connect power and motor, analogue control and that’s it! Multiple safety functions makes the controller extremely robust, and the integrated EMC filter ensures CE compatibility.
Also, the EC 750 can be controlled digitally . RS 485 interface and Modbus protocol will deal with that shortly. |
|
The TRM Range of Analogue Amplifier is a breakthrough in amplifier technology. Utilising the latest in electronic techniques, this compact current mode amplifier is capable of driving brushed DC Servo motors continuously at 100 volts and upto 20 amps depending on the model. Using the latest technology has enabled TRM to produce a small and very competitive amplifier.
Easily capable of fulfilling most applications requirements, the 10/100 is built onto a large heatsink and is enclosed in a case that also acts as a mounting bracket.
Connections are made via two connectors, one for the low voltage signals and the other for the higher voltage motor supply and drive connections.
The DC analogue amplifier has all the major features expected: Gain, Offset, Current limit control, Enable and Error indicators and a ± 10 volt input signal range.
The opto-isolated amplifier enable signal is capable of being driven high or low depending on the users application.
Main Features
24 to 100 volts DC input range
- 5,10 and 20 Amps maximum continuos
- Adjustable current limit
- Adjustable null offset
- Adjustable gain control
- Enable and Error indicators
- Current mode operation
- ± 10 volt command signal
- All functions easily accessible
- Enable High or Enable Low
- Built in heatsink*
- Mounting via four 4mm slots
- Current sense output 0-2.5 volts |
|
| The servo amplifier series ECOVARIO covers a peak power range between 1.4 kW and 7.0 kW. ECOVARIO is suitable for operation of 2- or 3-phase synchronous servo motors, DC motors and EC motors. ECOVARIO offers a large variety of interfaces and functionality. Standardized field bus options such as EtherCAT, CANopen (also interpolated), or Profibus DP ensure a fast system integration. Customer specific enhancements are possible. |
|
Parker's Compax3 digital servo drives have been enabled with ETHERNET Powerlink (EPL) motionbus technology.
Available in both 120/240 VAC and 480 VAC input versions
Current output from 2.5A RMS continuous to 155A RMS continuous
Available with ETHERNET Powerlink
Certified Category 3 Safety (EN954-1 Cat. 3)
Programs in all five IEC61131-3 International programming standard
Scalable control technology: preset indexer to fully programmable
Advanced following and camming support
Support for SSI feedback for additional load control
Resolver, Encoder, Sine-Cosine or Stegmann feedback
Multiple fieldbus options, including DeviceNet
Internal regeneration circuitry with external resistor connections
Easy-to-use wizards-based configuration via C3 ServoManager(TM)
Full diagnostic, tuning and 4-channel oscilloscope features provided in the standard C3 ServoManager(TM) software
CE (EMC & LVD) |
|
| ION® Digital Drives are compact, fully enclosed modules that provide high performance motion control, network connectivity and power amplification. Two power output levels are available, the ION 500 is rated at 500 Watts and the ION 3000 is rated at 3000 Watts. Various ION models are available to drive DC brush, brushless DC, and step motors. |
|
Servo Controls
Baldor has shipped thousands and thousands of AC and DC servo motors, drives, and controls to many diverse applications throughout the world. It all began in 1952 when Baldor shipped its first reliable adjustable speed control, and in 1983 Baldor began shipping easy to use servo controls and that tradition continues today.
Baldor's philosophy is to make control set up very fast, and easy, and quick to implement. This is accomplished by either a simple keypad, or through set-up wizards and your PC.
Baldor products help increase productivity, improve quality, work hard - and provide solutions for your application needs. |
|
PositionPro2 Combination Controller/Dual-Axis Digital Servo. Cambridge Technology's PositionPro2 is the next generation in integrated mirror positioning systems. This compact fully integrated positioning system combines real-time scan system motion control with laser control and auto-calibrated closed loop digital servo driver-amplifiers for Cambridge Technology Inc. galvanometer scanners. This fully digital DSP-based system includes, an intuitive unified graphical software workshop to simplify application creation, enable quick experimentation, and to reduce customer application development time.
PositionPro2 includes a built-in command signal generation subsystem to quickly and easily implement raster scanning, triangle-wave scanning, and sinewave scanning. Also included is a complete vector motion control language allowing complex jobs to be downloaded via the USB-2 interface into the PositionPro2 memory for execution. Two 16-bit data acquisition channels are optionally available to allow external data to be acquired synchronous with the galvo motion. |
|
Our drives portfolio offers servoconverters, servomotors and motioncards.
Description for pictured LD 2000 LogiDrive:
The servoconverter LD 2000 permits coping with the requirements of modern motion automation in a most intelligent way:
* compact size
* integrated line filter
* operation of brushless servomotors
* 5 rating class (1.5 A - 20 A) |
|
For nearly two decades, the name Moog has been synonymous with high performance brushless servomotors and servodrives offering the highest dynamic performance, power density and reliability. We are committed to offering a full range of products as well as custom solutions and systems expertise.
Moog's servomotors and servodrives are rugged for long service life and when you need repairs, ask for Moog Authentic Repair Services.
|
|
compact design
easy commissioning and programming
flat built-under mains filters available
IGBT power stage
detachable operating unit
rotating field frequency up to 650Hz
integrated PID controller
integrated PLC
optionally with RS 232/485 interface
integrated braking chopper
integrated mains filter (class A)
integrated setpoint potentiometer
6 multi-functional inputs
2 multi-functional outputs
for mounting onto DIN rail (up to 4kW)
degree of protection: IP20
|
|
|
