Sewage pumps

Flow: 0 m³/h - 440 m³/h
Pressure: 0 bar - 24 bar

The Compact C Range progressing cavity pump has been manufactured by Mono to offer you a transfer pump designed to fit into compact spaces, whilst reliably performing ...

Flow: 10 m³/h - 750 m³/h
Head: 3 m - 48 m
Power: 1.1 kW - 90 kW

... common sewage • Construction site drainage station of people’s air defense system • Industrial sewage of light industry, paper mill, textile, food processing plant, chemical industry • Sewage ...

Flow: 20 m³/h - 500 m³/h
Pressure: 10 bar
Head: 10 m - 30 m

... of waste can be pump depending on the impeller structure. • This series can be coupled with diesel engine and high-efficiency IE2 or IE3 (Optional) class electric motor. • Thanks to back pull out design, the rotating ...

Flow: 0 m³/h - 800 m³/h
Head: 0 m - 90 m

Kirloskar SHL solid handling pumps are single stage, single suction pumps with a back pull out type design. These are horizontal non-clog pumps. The SHL pump section ...

Flow: 12.5 m³/h - 50 m³/h
Head: 8 m - 20 m
Power: 0.6 kW - 2.2 kW

Electric submersible pumps with vortex impeller for pumping clean water or sewage with small residual solids.

Flow: 0 m³/h - 1,600 m³/h
Head: 0 m - 95 m
Fluid temperature: 0 °C - 40 °C

sewage submersible pump is suitable for many applications in the industrial and domestic markets involving the transfer of wastewater, sewage and many other fluids that contain suspended ...

Flow: 130, 210, 250 m³/h
Head: 29, 27, 23 m
Power: 30 kW

ASP2010 series self-priming sewage pump is a new production which is developed according to the latest technology home and broad.Pump has single stage,single suction,horizontal,gas-liquid ...

Flow: 150 l/min
Head: 6 m
Power: 300, 150 W

Vortex Pumps ●Impeller creates a vortex and let solids flow Solids are not easy to hit the impeller and it leads to longer life for impeller ●Rust-resistant stainless body Elbow and suction cover are made ...

Flow: 17 m³/h
Head: 22 m
Power: 1,600, 2,200 W

... pumping of sewage from collection sumps pressure drainage installation in polyethylene or concrete manholes as grinder pump on sewage lifting units Scope of delivery ...

Compact structure, easy maintenance, low initial investment cost. S-type direct coupled pump is suitable for conveying almost any liquid medium, including water, and is widely used in various... Compact ...

Flow: 681 m³/h - 1,703 m³/h
Head: 23 m - 125 m

The Magnum XP pump is single-stage, single-suction centrifugal mud pump. It is suitable for handling big capacity of abrasive, corrosive and plain tough slurries. The small footprint ...

Flow: 180 m³/h
Head: 29 m
Power: 23 kW

Our S pumps, including our Seltorque TM range, are market leaders when it comes to solids handling up to 4”. Industries that find our solids handling pumps invaluable include water and wastewater, construction ...

Flow: 40 m³/h
Head: 10 m
Power: 4 kW

... CYLINDER BORE × STROKE (MM): 70 × 55 DISPLACEMENT (CC): 212 OIL CAPACITY (L): 0.6 OIL TANK VOLUME (L): 3.6 STARTING MODE: manual starting

Flow: 0 m³/h - 2,520 m³/h
Head: 0 m - 49 m
Power: 3.7 kW - 55 kW

The pump shall be designed for liquids which are non-aggressive and non-explosive, sewage/effluent water with solids or fibers. The pumps shall have non clog, semi open or closed type ...

Flow: 0 m³/h - 15 m³/h
Head: 0 m - 9 m
Power: 0.75 kW

... supporting sewage water with heavy pollution we recommend our US series. Especially for the transportable use, in building site areas for example, our building pumps UB should be used. If centrifugal ...

Flow: 50 l/min - 300 l/min
Head: 9.9 m - 21.3 m
Power: 1.1, 1.5 kW

Sewage drainage pumps. The grinder system allows the pumping of wastewater with suspended solids and prevents blockage of the pump. Ideal for emptying septic tanks and residential sumps, ...

Power: 0.4, 1, 0.75 ch
Width: 21.25 in
Height: 30 in

... demanding Liberty Pumps. Features Fully assembled and shipped with a clear disposable construction cover that will protect the system during rough-in and masonry work. Available with any of Liberty Pumps ...

Flow: 500 m³/h - 3,000 m³/h
Power: 13 kW - 45 kW
Fluid temperature: 40 °C

... submersible pump. It allows big flow rate, works stably and reliably, greatly saving energy. It can be used for sea water drainage, water drainage in pool or river way, flood control and drainage, sewage ...

Flow: 100 m³/h - 280 m³/h
Power: 3 kW - 37 kW
Fluid temperature: 80 °C

The 6inch trash pump centrifugal ST Series is the standard for industrial and sewage applications. The heavy duty construction and easy-to-service design have made this pump the standard ...

Flow: 48, 47 l/min
Pressure: 1.85 psi
Power: 45, 41 W

... silent, Energy saving, Oil-free, easy maintenance Small and quiet aquarium air pump. Good choice for aquarist. Also popular by professional Aquarium hobbyist. A DB40 could support more than 10 small ...

Flow: 10 m³/h - 900 m³/h
Power: 0.75 kW - 22 kW

... protect the pump. Two sets of mechanical sealing in series and high-quality castings.All these features could guarantee reliable running of pumps continuously; 4.Compact structure,easy movable,easy installation.No ...

Flow: 82, 36, 14 us gal/min
Head: 0'00" ft - 240'00"

... suction lift limitations in deep manholes or excavations over 25 feet deep, the Hydraulic Submersible pump handles up to 4.25 inch solids and pumps efficiently at heads up to 240 feet. Available with ...

Flow: 0 l/min - 10 l/min
Pressure: 0 bar - 12 bar

Progressing Cavity Pump for dosing applications up to 12 bar Pumped Liquid Low to highly viscous liquids, pasty, neutral or aggressive, pure or abrasive, gaseous or tending to froth, also with fibrous and solids content ...

... liquid level above the pump "priming holes" the pump works properly but as soon as the liquid level is below the suction port, the pump will be unprimed and work dry. The pump ...