|
|
GBC plate beveling machine CHALLENGE 15 suitable
for large plates as well as small strips.
Once positioned on plate edge the machine travels
along the plate automatically, without any
intervention by the operator. |
|
| ... products without technical information |
| |
In the food industry, in the organic and chemical industry, and for wastewater treatment.
Some advantages of the rising-film SIGMASTAR®.
Superior product distribution due to the thermo-siphon principle. As product boils and rises in the tube, fresh product automatically rises to refill the tube. This distribution technique operates independently of the feed rate, allows a high degree of flexibility and the possibility of turn down.
Very short residence time; the product is in the SIGMASTAR® for less than a second. This is due to the short flow distance and the high product film velocity. This feature guarantees a gentle treatment of the product.
Low pressure losses across the tubes, a benefit of the short tube length.
High vapour velocity in the rising film, which allows the processor to achieve high concentrations and viscosity.
Clearly defined product flow path. There is no chance of local over-concentration.
High heat transfer co-efficients are obtained even when the feed temperature is lower than the boiling temperature.
Compared to other evaporizer systems less expensive for high grade materials of construction.
Easy assembly and dismantling. A change in the size of the heat exchange surface by varying the number of heat exchange plates makes it possible to create more compact systems. |
|
APV PLATE EVAPORATORS
During the plate evaporation process, liquid is pumped between thin plates with the heating medium on the mating surfaces. The product is then evaporated with the vapour generated forming a high velocity core. This expansion in volume causes a high-velocity, thin film on the heat exchange surface providing efficient heat transfer.
Plate evaporators should be considered for applications that have:
* Capacities up to 27,000 kg/h water removal
* A need for future expansion
* Limited head space
* A particle size smaller than 600 Micron
APV Product Range:
* Rising/falling film plate evaporators
The original plate type evaporator.
* Falling film plate evaporator
Combining all the advantages of the original Rising/Falling Film Plate Evaporator with the added benefits of even shorter product residence time and larger capacities.
* Paravap
The APV Paravap is specially designed to process high solids concentrates or those having non-Newtonian viscosity characteristics.
* Paraflash
For products which tend to crystallize during concentration or those that contain a high percentage of suspended solids.
APV Plate Evaporators Features/benefits:
* Improved product quality.
* Higher product concentration.
* Low liquid holdup.
* Easily cleaned.
* Flexible capacity.
* Low installation costs. |
|
| ICP manufacture a range of paper / sintered friction and steel intermediate plates. The product range covers most industrial and off highway applications and is produced to high quality standards. Excellent availability and delivery including low volumes for special applications. |
|
This product group includes all plate type friction components for clutches and brakes which possess driving teeth or lugs on their outer or inner diameters. Both plate and counterplate must be considered together, in general one plate with friction material works together with a counterplate of steel or cast iron.
The plates are the important functional element in every clutch and brake, and have been developed in many different ways since the early days of clutches and brakes. Ortlinghaus has played an important role in the total development of friction clutches, one example of its contributions being the patented, well known, sprung steel plate, known world-wide under the trademark 'Sinus'. The use for the first time of sintered plates in clutches, was also an important development. In the course of this development every relevant technological step forward - whether in frictional material, mechanical or heat treatment process -has been applied directly to the manufacture of the plates. As a result Ortlinghaus plates today contain the results of nearly one hundred years of research and development and represent a highly specialised component.
Supported by the experience gained over this long period of time, Ortlinghaus is today, able to provide a very comprehensive range of clutch and brake plates in a multitude of different dimensions, friction combinations and surface patterns. The number of standard plates listed in our catalogue is large and most of these are available ex stock, satisfying most of our customer requirement from this well proven range. Our customers benefit from quick availability angood price arrived at from volume production. Should it not be possible to solve a particular design problem with these plates, as listed in our catalogue, we are always ready to manufacture plates to meet specific customer wishes. In this area too our experience is extensive, every requirement can be satisfied with the aid of the most modern manufacturing techniques forms of oil channels.
|
|
... see all the products in the category
Clutches
|
| ICP manufacture a range of paper / sintered friction and steel intermediate plates. The product range covers most industrial and off highway applications and is produced to high quality standards. Excellent availability and delivery including low volumes for special applications. |
|
This product group includes all plate type friction components for clutches and brakes which possess driving teeth or lugs on their outer or inner diameters. Both plate and counterplate must be considered together, in general one plate with friction material works together with a counterplate of steel or cast iron.
The plates are the important functional element in every clutch and brake, and have been developed in many different ways since the early days of clutches and brakes. Ortlinghaus has played an important role in the total development of friction clutches, one example of its contributions being the patented, well known, sprung steel plate, known world-wide under the trademark 'Sinus'. The use for the first time of sintered plates in clutches, was also an important development. In the course of this development every relevant technological step forward - whether in frictional material, mechanical or heat treatment process -has been applied directly to the manufacture of the plates. As a result Ortlinghaus plates today contain the results of nearly one hundred years of research and development and represent a highly specialised component.
Supported by the experience gained over this long period of time, Ortlinghaus is today, able to provide a very comprehensive range of clutch and brake plates in a multitude of different dimensions, friction combinations and surface patterns. The number of standard plates listed in our catalogue is large and most of these are available ex stock, satisfying most of our customer requirement from this well proven range. Our customers benefit from quick availability angood price arrived at from volume production. Should it not be possible to solve a particular design problem with these plates, as listed in our catalogue, we are always ready to manufacture plates to meet specific customer wishes. In this area too our experience is extensive, every requirement can be satisfied with the aid of the most modern manufacturing techniques forms of oil channels.
|
|
|
... see all the products in the category
Brakes
|
Refrigerated units are insulated units without mechanical refrigeration. Eutectic refrigeration allows the required temperature to be maintained 24 hours and more for chilled products as well as for frozen.
The eutectic plate releases a constant cooling capacity due to the latent melting heat from the eutectic mixture.
Placed in the top part of the container, the eutectic plate releases the cooling capacity previously accumulated in the cold room during the freezing process.
To ensure the maximum efficiency from eutectic plate, the eutectic liquid must be completly solidified.
The freezing temperature must be at least 5°C less than the melting temperature of the eutectic fluid.
Depending on the type of refrigeration unit used, the freezing time may be from 6 to 24 hours.
Seven eutectic solutions ensure maintenance of the requested temperature
For chilled or frozen products. |
|
Tech-Etch can photoetch flow field bi-polar plates used in PEM (Proton Exchange Membrane) Fuel Cells. Bi-polar plates, or separator plates, are conductive plates in a fuel cell stack that act as an anode for one cell and a cathode for adjacent cells. The plates contain flow channels for the fluid feeds and may contain conduits for heat transfer.
Tech-Etch can produce plates with interlacing front and back side channels to produce a corrugated effect for cooling purposes.
In addition, photoetching can be combined with machining to produce cross-over channels. Tolerances up to .0005 inches can be achieved in typical materials such as Titanium and Stainless Steel for these anode and cathode plates. These production processes are extremely desirable in the design and prototype stage of fuel cell development. Tech-Etch manufactures their fuel cell plates to customer specifications. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
|
... see all the products in the category
Magnets
|
The advantages of piezoelectric sensors are particularly evident in force measurement. Robust and overload-proof, they are capable of resolving the smallest changes in force, even with high preload.
Characteristics
Thanks to high resolution suitable for measuring extremely small dynamic forces, low height, insensitive to the effects of temperature.
Applications
Cutting force measurement in ultra-precision machining (such as wafer cutting, grinding of hard disk read heads), ultra-precision machining of brittle-hard materials, 3-component force measurement of extremely small forces, measurement in confined spaces. |
|
| The ATX Series are the same” latest technology” components as the webLink Series available in a rack or panel mount options, while the SY Series offers the same “legacy” technology as the INX systems. Combined with an industrial monitor, these systems offer a complete factory floor package. |
|
| ... products without technical information |
| |
* Ij3000 XLS Controller :
The Ij3000 XLS Controller was designed and built to meet any demanding coding application. Diagraph has engineered the XLS Controller to exceed performance expectations. The XLS Controller seamlessly integrates Impulse Jet and Integrated Valve technology offering a networking function that delivers reliable, high quality printing to any automated production enviroment.
* Ij3000 ES Controller :
The Ij3000 ES Controller is a powerful, low-cost web-server based HMI features a color touchscreen display, drives Diagraph’s Integrated Valve or Impulse Jet printheads, and has a 100-base T Ethernet network port for web browser, network connectivity. Diagraph has created special package “Ij3000 ES kits” for dual head Integrated Valve 9 or 18 dot printhead applications and has special introductory offer. Interested parties should call 800-722-1125 for details.
* NEW! IV-18 Dot Printhead for IJ3000 Ink Jet System
Diagraph is pleased to introduce the IV18-Dot Printhead for the Ij3000 Integrated Valve Large Character Ink Jet System. Key Standard Features Include: Two-piece, die-cast aluminum housing, environmentally sealed printhead for harsh environments, robust metal housing over entire printhead, built-in LED display and membrane switch for: -->channel purge (one or all channels) -->electronic pulse width (dot size) adjustment -->pressure gauge, automatic first dot correction, overdrive protection, photocell mounting bracket holes, backwards compatibility with existing Ij3000 and Series 1 printheads. The IV-18 Dot Printhead is driven by Diagraph’s Ij3000 Ink Jet Printing System. |
|
Ap25
Attractive yet proven design which won't let you down.
Wide choice of specification so there's bound to be a version suited to you.
Easy to use which means your customers like it.
Value-for-money so you don't have to re-invent the wheel.
Options include dedicated international character sets and additional buffer. All units utilise Epson impact dot matrix printer mechanisms.
|
|
Ap1200 Panel Printer
'The AP1200 panel printer sets the standard for high speed panel mounting thermal printers. A unique paper reloading system makes the printer ideal for applications such as process and condition monitoring where the paper must be quickly changed and with the least disruption and complexity. Simply open the loading door and drop the paper in. Interface options available are RS232 and parallel, Seiko DPU emulation is also an option' |
|
APL 8000 Series
Self adhesive labels up to 6" print width Print & Apply System for one side labelling. Designed to apply GS1 - 128 pallets labelling delivering the best high quality printing. Exceptional printing quality due to the A-Class Datamax print engine |
|
Self-adhesive labels real time Print & Apply System for palets three panel labelling. Designed and produced fulfilling all requirements to obey GS1-128 Application Identification Standards.
Printing and application are carried out automatically and effectively, turning into a high profitability equipment. Due to its flexibility easily adapts when variable data label printing and application is needed in half speed situations. Exceptional print quality obtained with the up to 300dpi Intermec´s EasyCoder PX4i/PX6i engine. |
|
| APL 8300. Self Adhesive labels up to 6” print width. Print and Apply System for three panel labelling. Exceptional quality printing due to its A-Class printing engine from Datamax |
|
Videojet P3400 Label Printer Applicator
The Videojet P3400 label printer applicator is easy to use and maintain, and features the versatility of modular spares to deliver maximum uptime and performance. Available with multiple printer options and a variety of application choices, the Videojet P3400 provides a customizable, off the shelf solution.
Simple, modular design
RFID Enabled
High quality thermal transfer printing
Built to last in the most rugged industrial environments
User configured beacon and status output
Multiple label configuration menu
Flight time compensation for automatic label placement control
Ethernet connectivity for set-up and control
*THIS ITEM IS CURRENTLY AVAILABLE ONLY IN NORTH AMERICA |
|
| APL 8200. Self adhesive labels Print and Apply System capable to fit to any packaging line. Designed and manufactured to apply GS1 pallet labelling delivering the best high quality printing due to its printing engine A-Class from Datamax. Specially projected for self-adhesive dual panel labelling applications |
|
Self - adhesive labels real time Print & Apply System for pallets dual panel labelling. Printing and application are carried out automatically and effectivelly, turning into a high profitability equipment.
Controlled by a PLC, It can easily be adapted to all packaging lines using synchronisation and guided alarm signals. Due to its versatility can be connected to any kind of information system: Windows NT, UNIX, AS/400, PC, etc. and ERP environment.
It is capable of working in stand - alone mode thanks to its alphanumerical keyboard and powerful label edition program. |
|
|
|
see the results for the following category
