|
|
MAP Automatic marking, punching, shearing line for metal profiles - flat bars - angle sections - I - U - H- UPAF, etc.
MAP range: MAP 160 MAP 300 MAP 450
Universal, powerful and high-speed machines
MAP 160, 300 and 450 machines are flexible marking, punching, shearing systems for metal profiles, etc., designed to switch easily from angle sections to flat bars, or to I - U - H profiles.
The modular design makes it possible to adjust equipment capacities to user requirements at the lowest cost.
Access to tools, punches and dies, is easy and makes it possible to switch production quickly.
The MAP series punching-shearing lines are the only machines on the market performing in a single pass all operations normally carried out on beams:
- easy programming
- fast and precise
- flange and web punching in a single pass
- easy and quick machine adjustment.
These machines are especially suited to steel structure construction.
|
|
The automatic plate systems are suitable to process heavy steel plates with a thickness up to 40 mm.
The CNC controlled plate processing machines are able to punch, drill, tap, centre point, deburr and mark heavy steel plates automatically.
V250 Plate punching system
The V250 plate punching system is consists of a hydraulic triple punching machine and a X-Y table with hydraulic material clamping. A drilling unit, an automatic tool changer, a numbering unit and a deburring unit can be added to the machine as an additional extra. With the drilling unit, steel plates can be provided with holes, which cannot be punched, due to the material thickness restrictions.
V200 Plate drilling system
The V200 plate drilling system consists of a CNC-controlled vertical drilling unit and a X-Y table. With the V200, steel plates, pre-cut to a certain dimension, are automatically provided with holes and screw taps. The X-Y table has a double hydraulic material clamping system. Automatic tool changer, a numbering unit and a deburring unit can be added to the machine as an additional extra. With the deburring unit the drilled holes will be deburred automatically from the underside. |
|
| These are the most modern, rapid and flexible CNC lines to punch angles. Their main features are: low-cost; easy installation; automatic feeding; easy programming; flexibility for small/medium size pieces; new productivity concept. Besides the punching and shearing stations, a daisy wheel marking unit and a multifunctions unit, that can be "dressed" with extremely useful optional equipments such as double punching, notching and marking tooling, are also available. Angles are fed by means of a carriage with pincher in order to guarantee precision in positioning and reduced scrap. |
|
| The TIPO B machines are designed to comply with the different requirements when automatically processing in one cycle large plates and medium/high thicknesses, ensuring high quality, precision, productivity and flexibility. These lines are flexible CNC centers capable of complying with the requirements of both traditional steel fabricators and all types of industry requiring flat components in steel for their particular needs. Besides punching and plasma cutting units, daisy wheel marking unit, drilling/milling head, automatic tool changer , oxy-cutting unit and automatic unloading devices are also available. The plate positioning is granted by two carriages with pincher assuring high precision even when heavy plates are processed. |
|
| This is the most modern, rapid and flexible CNC line to punch plates. Its main features are: low-cost; easy installation; reduced dimensions; easy programming; flexibility for small/medium size pieces. Besides the multi-tool punching station, a marking tool and a drilling head are also available. The plate positioning is granted by a two-pincher coordinate table assuring high precision while processing. |
|
VP Marking, punching, drilling and shearing line for angle sections
VP range: VP 150 VP 160 VP 180 VP 200 VP 206 S VP250 - D
VP machines cover all machining operations: marking, punching, drilling and shearing.
The high-pressure system (400 bars) reduces production times and currently makes it possible to attain production rates of more than 1,000 operations per hour. Punching machines incorporate NC backmarking. The number (2 to 6) of punching units and the related power (50 to 93 tons) vary according to the size of the angle sections to work and the number of different diameters in each flange. The single-cut type shear (from 160 to 500 tons) prevents loss of metal and distortion. Blades do not need to be changed.
Highly appreciated by manufacturers of transmission towers and electrical steel towers, the automatic VP marking, punching, drilling, shearing lines for angle sections are controlled by a single operator. Reliable and designed for highest productivity, various types of works may be programmed.
|
|
PG Marking, punching and drilling machine for plates and gussets
PG range: PG 83 PG 83 P PG 116 PG 116 S PG 116 P PG 2000
Simple, inexpensive and fast machines
The machines from the PG range are powerful and fast, while combining at the same time operations such as marking, punching, drilling, pop marking, deburring and tapping for working on large-size plates and gussets (up to 2000 x 1000 x 40 mm).
The layout of the clamps inside the machine gooseneck frees the working space and makes handling of parts to machine easy.
Easy programming and use thanks to the computer-assisted manufacturing softwares and the numeric control system.
The machines in the PG range are inexpensive and fast, and satisfy most requirements in a structural steel workshop. The layout of the clamps gives the operator space and safety, important factors ensuring high productivity.
|
|
MAG B : Drilling punching marking and plasma cutting machine for plates
MAG B range: MAG B 320-80, MAG B 320, MAG B 620, MAG B 1225
Efficient, easy to run and flexible machines for plates
Compact line for complete machining (drilling, punching, marking and plasma cutting) of middle and high thick plates in one handling
The purely software-based solution is a new approach in which a processor carries out all automation tasks within a single-processor mode. The PC software is used for processing PLC and NC tasks.
|
|
MAP Automatic marking, punching, shearing line for metal profiles - flat bars - angle sections - I - U - H- UPAF, etc.
MAP range: MAP 160 MAP 300 MAP 450
Universal, powerful and high-speed machines
MAP 160, 300 and 450 machines are flexible marking, punching, shearing systems for metal profiles, etc., designed to switch easily from angle sections to flat bars, or to I - U - H profiles.
The modular design makes it possible to adjust equipment capacities to user requirements at the lowest cost.
Access to tools, punches and dies, is easy and makes it possible to switch production quickly.
The MAP series punching-shearing lines are the only machines on the market performing in a single pass all operations normally carried out on beams:
- easy programming
- fast and precise
- flange and web punching in a single pass
- easy and quick machine adjustment.
These machines are especially suited to steel structure construction.
|
|
| These are the most modern, rapid and flexible CNC lines to punch angles. Their main features are: low-cost; easy installation; automatic feeding; easy programming; flexibility for small/medium size pieces; new productivity concept. Besides the punching and shearing stations, a daisy wheel marking unit and a multifunctions unit, that can be "dressed" with extremely useful optional equipments such as double punching, notching and marking tooling, are also available. Angles are fed by means of a carriage with pincher in order to guarantee precision in positioning and reduced scrap. |
|
VP Marking, punching, drilling and shearing line for angle sections
VP range: VP 150 VP 160 VP 180 VP 200 VP 206 S VP250 - D
VP machines cover all machining operations: marking, punching, drilling and shearing.
The high-pressure system (400 bars) reduces production times and currently makes it possible to attain production rates of more than 1,000 operations per hour. Punching machines incorporate NC backmarking. The number (2 to 6) of punching units and the related power (50 to 93 tons) vary according to the size of the angle sections to work and the number of different diameters in each flange. The single-cut type shear (from 160 to 500 tons) prevents loss of metal and distortion. Blades do not need to be changed.
Highly appreciated by manufacturers of transmission towers and electrical steel towers, the automatic VP marking, punching, drilling, shearing lines for angle sections are controlled by a single operator. Reliable and designed for highest productivity, various types of works may be programmed.
|
|
MAG B : Drilling punching marking and plasma cutting machine for plates
MAG B range: MAG B 320-80, MAG B 320, MAG B 620, MAG B 1225
Efficient, easy to run and flexible machines for plates
Compact line for complete machining (drilling, punching, marking and plasma cutting) of middle and high thick plates in one handling
The purely software-based solution is a new approach in which a processor carries out all automation tasks within a single-processor mode. The PC software is used for processing PLC and NC tasks.
|
|
Microfor FP1
Designed for flexible and batch production, the
FP1 is a one spindle machine available with
the EDM technology or a high speed drilling spindle.
Main topics:
For batch flexible production
Cylindrical and shaped holes from Ø 0.050 to 1,8 mm
Command based on industrial PC
Specific technology of micro EDM
Rotation of the electrode while machining to optimise quality and drilling speed
Machining with tungsten-carbide, brass or copper electrodes
Central cooling with tube electrodes
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
