- Packing - Handling - Logistics >
- Storage >
- Shelving
Shelving
Capacity: 100 kg
Width : 970 mm
Depth: 400, 500, 600 mm
Stability and flexibility are the key concepts behind our galvanized steel shelving system The system is easy to assemble and may be extended in either direction Posts made of profiled steel 30 x 30 mm Rugged galvanzied ...
Height : 2,000 mm - 9,000 mm
Depth: 400 mm - 600 mm
ST60 upright, which is used for multilevel systems when higher loads are required or in seismic areas. The ST60 system is characterized by the ST60 frame consisting of two closed uprights, two galvanized feet and a number of cross-braces ...
METALCOOP s.c.a.r.l.
Height : 1,000 mm - 5,500 mm
Depth: 300, 350, 400, 500, 600 mm
Antares ST30 is a system designed by Metalcoop for racking with shelves that consists of two Antares uprights with plastic or galvanized steel support feet and a number of cross-braces according to the height of the frame. It ...
METALCOOP s.c.a.r.l.
Height : 2,000 mm - 9,000 mm
Depth: 400, 500, 600 mm
Multilevel systems, Metalcoop reliable solutions Multilevel systems allow dividing storage on multiple load levels for archiving and warehousing of light and medium loads. They consist of braced frames, floors of different sizes and ...
METALCOOP s.c.a.r.l.
Metal shelving. 2mm thick sheet metal uprights. The curved profile gives them great rigidity. With laces every 50 mm, which allows an optimal graduation of the rails. Epoxy paint RAL5017 dried in the oven before degreasing ...
Shelving systems provide an ideal way of storing, organising and identifying small parts when handling component storage in warehouses and picking areas. With a wide selection of shelving systems and ...
DEXION
DEXION
As the most common form of pallet racking storage: Standard pallet racking in a wide aisle layout provides unrestricted access to all pallets. Pallets stored in wide aisle racking are ...
DEXION
Capacity: 1,000 kg
Height : 2,000 mm
Width : 1,060 mm
... sump and 3 galvanised grid shelves as storage levels •Galvanised frame •Sturdy construction with reinforcing crossbars •Shelving height can be adjusted in 25 mm increments •Can be expanded at any time •Sealing tested ...
DENIOS
Capacity: 225 kg - 700 kg
Height : 790 mm
Width : 1,235 mm - 1,370 mm
• Sturdy steel construction, galvanised • With drum support for storing drums horizontally • Can be stacked 3 high • Delivered flat-pack, with instructions for assembly • Can be extended with W2 spill pallet, approved for storage ...
DENIOS
Height : 1,235 mm
Width : 1,270 mm - 1,429 mm
Depth: 646 mm - 1,235 mm
• For the storage of substances in all water hazard classes • Sturdy, galvanised stacking rack with spill pallet in polyethylene (PE, highly resistant to many aggressive chemicals such as acids and alkalis) • For horizontal ...
DENIOS
Capacity: 700, 1,300 kg
... or in mini-containers. The dynamic Rack allows to mix different types of packaging. Supply at the station is done by Rollis or by Rack; the operator does not ;need to move anymore. The width pitch between the Racks ...
Labadis
Capacity: 200 kg
Height : 1,350 mm
Width : 460 mm
The more compact a front line is, the more efficient it is. The supply of Rollis trolleys contributes to this compactness, but when it is low in height (heavy parts) we can use the free space at the top to put parts in containers. Gathering ...
Labadis
Capacity: 700, 1,300 kg
Width : 460 mm
... are economically stored into Dynamic Racks also called gravity shelves. The challenge is to present to the staff the maximum of references in a minimum of distance Labadis has developed a compact Dynamic Rack system ...
Labadis
Faber has the engineering capability to assist and deal with almost any request for CNG and Hydrogen Cylinder racks for use in Buses & Trucks. By having the expertise and production facilities for all four designs of ...
Drawer warehouse for the storage of sheets of various sizes, flat materials in general or heavy components. The structure is made up of uprights with shelves that support removable drawers with wheels. The quantity of drawers and their ...
Capacity: 200 kg
Height : 1,000 mm - 2,000 mm
Width : 816 mm - 1,327 mm
• Storage capacity Drawers: 8 • The number and height of drawers and the number of positions are variable. • System details - Individually lockable drawers and compartments (optional) - Visual display of storage location - ...
LOKOMA
Usage Shelf units for bar materials with 3 different applications: • Single- or double-sided shelf unit for storing tube rounds, bar material, pipes and tubes on cantilever supports • Storage of di erent goods (blanks, storage ...
LOKOMA
The pull-out shelves permit easy and e effortless handling of heavy and bulky items by hand. A lift unit operation is also possible. Cover plate • Folded twice by 100 mm on the long side, can be screwed to the shelf unit frames ...
LOKOMA
Kimer conventional pallet racking is the most universal system for direct and unitary access to each pallet. They allow easy and simple stock control. Kimer advantages: - Greater diversity of racks ...
KIMER
Compact palletizing is the perfect solution for storing homogeneous products with a large number of pallets by reference. Take advantage of up to 85% more available space by minimizing the working aisles of the truck. There are two ...
KIMER
... significant operational cost savings. Kimer advantages: - Possibility that the racks are fully pre galvanized: Optimum quality for installation in cold stores. - Shelving elements tested by ...
KIMER
Height : 1,200 mm
Width : 3,900 mm
Pallet Rack is industrial shelving par excellence. It is ideal for the storage of pallets and bulky materials (standard sizes up to 3900×1200 mm), but can also be configured, using the accessories, for ...
Mobilfer S.R.L.
... eliminate the space allocated to the picking aisles and facilitate the storage and movement of pallets. The heavy gravity flow shelving lends itself to FIFO (Firs In – First Out) and LIFO (Last In – Last Out) picking ...
Mobilfer S.R.L.
... is in cold rooms, but this handling system can be applied in any type of warehouse, even on pre-existing shelving. The mobile pallet rack shelving also complies with the principles ...
Mobilfer S.R.L.
When it comes to efficient and durable storage solutions, steel racks for warehouse with dunnage and metal containers for warehouse storage stand out. These racks and containers, commonly used in returnable ...
RACK FOR 8 BUMPERS HAVING A SUPPORT ROD WITH SPONGE SHEATHS SIZE: DEPTH MM 1000 WIDTH MM 805 HEIGHT MM 2150 SUPPORTING ARM LENGTH MM 600 + MM 600 WEIGHT KG 26
RACK FOR 4 BUMPERS HAVING A SUPPORT ROD WITH SPONGE SHEATHS SIZE: DEPTH MM 600 WIDTH MM 805 HEIGHT MM 2150 SUPPORTING ARM LENGTH MM 585 WEIGHT KG 21
Radio shuttle rack is a kind of new storage solution. This system consists of forklift, racking system and shuttle. Forklift carries goods onto shuttle. Shuttle automatically take the goods into racking ...
Jiangsu EBIL Intelligent Storage Technology Co.,Ltd.
Drive in rack are exceptionally suited to large stocks of relatively few product types. Use this high density system to reduce overall square footage requirements by 35% or more, compared to a standard pallet rack ...
Jiangsu EBIL Intelligent Storage Technology Co.,Ltd.
Electric mobile rack system(EBIL-TECH-EMR) Safety light electric mobile rack system is one of the shelf systems for high-density storage. The system needs only one channel with high space utilization ...
Jiangsu EBIL Intelligent Storage Technology Co.,Ltd.
Height : 1,200 mm - 2,450 mm
Width : 800 mm - 1,350 mm
Depth: 500, 400, 600, 350, 300 mm
Modular metal shelves with a back stop which can be raised or lowered by increments of 25 mm and are connected by four hooks to the metal props which are in turn protected by plastic pads. The frame is reinforced by a longitudinal and ...
KenWei Intelligent Mobile File Cabinet & High-Density Mobile Shelving KENWEI Intelligent dense file rack is referred as an integrated intelligent high density Filing Cabinets, intelligent storage file ...
Consisting of only two system modules (frames and shelves), complex shelf rows are created for all applications of small parts storage (e.g. spare parts magazine in industry and trade, sales warehouse in production-connection trade). ...
Depth: 630, 1,150, 590, 1,090 mm
As cantilever rack with arms of equal length and as long goods rack with arms of different lengths. The flexible solution for horizontal storage of long and heavy goods. The welded cantilever uprights ...
According to its function, the stand is expositional; the goods are widely presented to the customers. It can be consisted of 5-8 meshed shelves; their angle of slope can be regulated according to overall dimensions of goods. There is ...
Height : 2,000 mm
Width : 802 mm
Depth: 450 mm
Functionally universal rack. Easy in assembling and in transportation. The standard variant of the rack includes 5 baskets with the depth 340 mm. The baskets could be placed at any height. The wide range of the basket ...
Functionally universal rack. Easy in assembling and in transportation. The standard variant of the rack includes 5 baskets with the depth 340 mm. The baskets could be placed at any height. The width of the basket could vary.
Inclinable lamella shelves and a comprehensive range of accessories make this rack type a real bestseller. It also performs well as file rack in the office area.
Marken has a wide selection of racks & payouts for wire, hose, and cable assembly lines. Lasting quality construction Smooth release and feed Time saving process control
Marken has a wide selection of racks & payouts for wire, hose, and cable assembly lines. Lasting quality construction Smooth release and feed Time saving process control
... options. Static archive shelving is the ideal system for creating an archive accessed by multiple individuals at any one time. All shelving in the archive is accessible, all the time. Bruynzeel’s ...
Bruynzeel Storage System
Bruynzeel Storage Systems has a wide range of mobile shelving systems for archives. Also known as roller racking, rolling stacks and book stacks, the most important features of our mobile shelving systems ...
Bruynzeel Storage System
Bruynzeel’s Double Decker mobile shelving is an ideal solution to maximize your archive storage if you have a building or storage facility with high ceilings. Compactus Double Decker provides four times the capacity of ...
Bruynzeel Storage System
Capacity: 265 kg
Height : 1,800 mm
Width : 1,200 mm
... steel modular shelving system from RS PRO is ideal for everyday storage use in office, garage unit and workshop environments. These modular shelves have a load capacity of 265kg to help you to store everything more efficiently. ...
Capacity: 25, 230 kg
Width : 3,600 mm
Depth: 4,552 mm
... operation, since the walking distance is reduced. Additionally, more articles can be picked from one rack in comparison to the picking process from pallet shelving. Benefits Learn more how the Carton ...
... integrates high-quality storage racks and industrial shelving into turnkey systems with optional automated handling solutions. Whether you want to maximise unused space or build a new warehouse, Dematic ...
Cornix Plus® : shelving You want to store small parts ? 1, 2, 3 or 4 tier ? Unlimited possibilities with the Cornix Plus® evolutive boltless system ! Shelving for archives, cardboard or plastic bins, ...
CORNIX
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining