|
|
|
Easily adjustable steel shelving with a full range of accessories (dividers, doors, plinths, ect ...) for small and medium parts storage.
|
|
Superior Visibility and
Access at Pick-Point
The Pick ShelfTILT lets pickers easily spot and reach product for rapid, accurate picks right from the master carton.
Maximizes Product Density
The tilt assists product flow right to the pick face. Virtually the entire shelf surface is available for dense product placement and total use of the cube.
Easy "Drop-In" Installation
Tilted Pick Shelf quickly turns YOUR standard single-deep pallet rack into an efficient, well-organized "pick zone."
Selection Guide :
Rack depth determines Tilted Pick Shelf depth. Bay width (between uprights - left to right) determines width and number of Pick Shelf sections. Use 9" Span-Track® Hangers. Two shelf sections within one level of a bay require a minimum of three hangers. A single shelf used alone in a bay needs two hangers.
|
|
Pallet live storage systems play an increasingly important role in warehousing and storage technology, as users recognise their potential for improving efficiency. In the past, pallet live storage was mainly installed as a buffer store in the production area as well as in warehouses and despatch areas. Today, there is a strong tendency towards using the pallet live storage system for order picking because the FIFI principle is strictly main-tained. An equally interesting option is push-back pallet racking which allows compact storage according to the LIFO principle.
The system specific compact lane configuration in with as well as in height results in a high storage density and thus in an optimum utilisation of available warehouse volume.
With pallet live storage, floor space utilisation is 60% higher than with conventional racking. Moreover, constant availability of stock avoids idle times.
|
|
Live racking is fitted with a slightly-inclined gravity flow rack which allows the pallets to slide down to the other side at a controlled pace thanks to gravity.
Advantages:
- Enables perfect pallet turnover (FIFO SYSTEM).
- Maximum capacity as storage system is compact.
- Time and space saved in pallet handling.
This is an ideal system for warehouses of perishable goods, although it can also be used in any industry or distribution business (food, car and pharmaceutical industries, chemicals, etc.).
|
|
|
Ridg-U-Rak's Horizontal Pallet Transfer System provides you with a reliable, uninterrupted flow of product without the disadvantages of gravity flow systems. Pallets proceed at a controlled safe forward speed. No incline means no wasted vertical space at the input end and no need for jam-susceptible braking systems. Also eliminated is the fear of runaway pallet loads which can fly off the end of a conventional flow system. What's more, Ridg-U-Rak's patent-pending design permits virtually unlimited lane depth
|
|
META bolted shelving offer a practical supplement to the shelving system
and are therefore also ideal for the general plant equipment. If individual
bays or rack rows are continuously integrated into an existing equipment,
the economical system solutions of META are always the right choice.
Ready packed - META FIX SET bolted shelving
Easy handling and simple transport due to ready packed units
(starter or add-on bays)
- All-purpose, for example for stock, workshop, warehouse, showroom,
cellar, office etc.
- Clear organization at a cheap price
- Shelves for the assembly of accessories like plain dividers and mesh dividers prepared - perforated at 50 mm centres
- Shelves adjustable at 25 mm vertical centres
|
|
+ Versatile : ideal for storing hazardous products,
paint, oil, cleaning products, etc.
+ Practical : easy assembly and maintenance.
+ Robust : cold profiled upright with ten bends
Frames with two uprights.
Uprights in cold profiles 8/10 steel.
Shelf levels are adjustable every 40mm
Open version
Tubular shelves - galvanised
2000 mm high. 5 shelves
Starter and extension bays from 300 to 1000mm deep
Plastic top caps
|
|
The R2000, R3000, R4000 and R7000 modular shelving systems provide a quick economic solution to storage problems. They can be extended as required at any time from single- to multi-tier systems.
Modular shelving systems for all occasions.
You can choose from:
R 4000: Boltless starter and extension system can hold up to 2.5 tons
R 3000: The slot-in frame system can hold 3-5 tons
R 7000: High-bay and long-span frame system can hold up to 5 tons.
R 2000: Boltless shelving system for multi-tier shelving can hol up to 5 tons.
FR 0: Modular welded frame system
LS 600: Longspan racking system with profiles
Systems with high volume compression.
|
|
|
|
|
|
Storage and retrieval of heavy, bulky items has never been easier! With the Stanley® Vidmar® STAK System®, one operator can efficiently manage loads weighing up to 4,000 lbs.—all in less than 250 square feet.
Based on a system of removable, adjustable pallets (instead of fixed shelves) and a captive lifting and handling device, the STAK System® helps maximize storage density by minimizing the vertical space requirements of each stored load. Each stored load has its own special location, so you can store or retrieve it in less than 2-1/2 minutes—regardless of its size, shape, or weight!
Captive lifting and handling device that saves space, saves time, and boosts productivity
Ideal for work-in-process, maintenance, motor storage applications and tire storage
STAK System® rises 16 feet above the ground but has a small overall footprint, maximizing vertical space, saving valuable floor space, and getting large items off the floor
Aisle space requirements are narrower than those required by using a conventional forklift
Handling device maneuvers on four axes, creating total 360 degree flexibility
STAK System® can be easily expanded as your needs grow
Specific 2,000 or 4,000 pound systems
|
|
A simple modular system with only 5 primary components.
Easy to assemble and very robust, PROTUB is the perfect system for archives, boxes.etc.
|
|
Space for big items
Whether stored horizontally or vertically: Big, bulky and particularly heavy items could ideally be stored in META MINI RACK speed racks.
For retail markets, industry and handcraft, the META SPEED-RACK offers a reasonable solution. With isosceles, symmetric
angle profiles it is very easy to handle - simple in planning, developing and assembly.
|
|
V-Grip Shelving
At the heart of equipto’s engineered space solutions is V-Grip, an industrial shelving system design that is unmatched in structural integrity and provides the industry’s broadest selection of accessory components to meet virtually any application.
• V-Grip upright posts have an exclusive triangular design that maximizes
load-bearing capability while providing a smooth front surface without
unsightly holes or hardware.
• Combine V-Grip components to meet specific applications:
• Heavy duty steel shelves
• Wire shelves for better flow of light and air
• Versa rack shelf beams accommodate wood, wire or steel shelves
• Modular drawers in 48 different sizes with a capacity of 200 or 400 lbs.
• Use full or partial height dividers to create custom storage bins
• Bulk rack options including solid or wire shelves with spans up to 8 feet
and capacities up to 3400 lbs. Per level
• Reflective white back and end panels
|
|
- Load capacity (from 550 lb to 1925 lb) and a design adapted to manual storage in most industrial and commercial sectors.
- An extremely versatile structure, to which a wide range of accessories can be added.
- A functional design that ensures it's easy to use.
- Common post for Mini-Racking and industrial shelving.
|
|
The sheet metal shelving with partitions is perfectly adaptable to all areas of business, but especially the tertiary sector.
With its steel sheet partitions and various finishes, the product adapts perfectly to the existing environment.
The shelves are adjustable in stages of 25mm and they are specifically designed to support heavy loads.
Many accessories complement the range: doors - vertical separators - drawers....
Solid metal shelf
Possibility of 360 deep hanging file folders
Attractive
Easy adjustment using pegs in stages of 25mm
Many accessories
Rust-resistant (zinc-plated)
Width: 900, 1000 and 1250 mm
Height of uprights: 2000, 2200 and 2500 mm
Depth of shelves: 250mm, 300mm, 360mm and 500 mm
400-800mm for the multi-shelving
|
|
Saving space, maximizing storage capacity, reducing costs and controlling unauthorized access are the constant concerns for managers of archives, broadcasting (media, magnetic tape, film cans) and storage facilities.
Archives, films, tape, videos, discs. We can store everything with our media shelving system.
Pioneers in the industry of mobile shelving units, Montel has the largest portfolio of storage shelving products for fixed and high-density mobile storage systems. Archives shelving for storage of archival boxes, media shelving for storage of magnetic tapes and film cans, Montel's high density shelving systems are renowned to be the smoothest and safest systems in the industry.
Montel can provide high density storage solutions for your specific storage needs:
- Archives
- Blue Prints
- Books
- Boxes
- Media
- Magnetic tape
- CDs or DVDs
- Collections
- Files
- Film Cans
- Golf Bags
- Skis and Boots
- Tools
- Videos (VHS Tapes)
- And anything else you can think of ...
|
|
Metal Shelving for Archives
Make maximum use of availabe archive space without construction changes. Easy-to-assemble, no-screw plug-in system with lots of application possibilities to store your office files.
|
|
Boltless shelving SKR3131BG
starter bay
98 bin
HxWxD 1850x1058x300 mm
max. load per level 50 kg
galvanised
Reference number: SKR3131BG
|
|
Vertical cable coil storage provides a considerable saving in space compared to the traditional ground storage systems. Space utilization rations can be as high as 1 to 5 if the drums are arranged vertically up to heights of 5m, allowing on average 5 drum levels.
This system not only allows for a better use of space but has other advantages such as:
„X quick identification of the drums to be withdrawn;
„X quick withdrawal of cable lengths directly from the stored drum.
The drums are fastened to a shaft with locking cone on supports that allow the rotation of the drum and therefore high speed unwinding with our machines.
Our racks are also provided with patented safety system (quick functional operation) to prevent the drum coming out of position and this allows the operator to work safe however the drum is placed (cable top up or down).
|
|
|
For five decades, Dexion have saved space, saved time, cut costs, with products that – simply – do the job better than any others. Whether you need a simple run of tough steel shelving, or a complex mezzanine storage area, or something in between, you’ll find it in the Dexion range.
|
|
COMPATTA is a system of mobile shelves on rails, that by reducing service aisles to a minimum allows up to twice as much space to be used with respect to normal shelving systems. By equipping mobile bases with shelves of different types and capacities it is possible to store materials of varying sizes and weights. The electronics guarantees control and safety in all conditions. The control of the storage system is always possible by using the system operating SW and connecting it to the firm’s central IT system. The degree of technology and expertise acquired from the hundreds of systems created by ICAM over thirty years renders COMPATTA the leading product on the market.
Advantages
Maximum exploitation of space
Future expandability
Combinable with any type of shelving
Reusability of pre-existing shelving
Connectable to operating SW and company IT system
Integratable with barcode operation and RF terminals
Suitable for normal, refrigerated and flameproof environments
|
|
Drawer storage walls combine all the advantages of drawer cabinets and simple shelving systems. Drawers, pull-out and adjustable shelves can be combined in drawer storage walls.
This variability enables units that flexibly adapt to the quantity, size and variety of the stored parts. Changes can be readily carried out by simply modifying the individual modules, if necessary. The diversity of the system enables setups closely adapted to your particular material flow
|
|
The customized Rexroth Flow Rack System is a versatile way to supply materials and containers in a manner best-suited to your production.
The Flow Rack System can be used as a "supermarket shelf" as well as to supply containers (kanban) directly at the workstation.
You can select your optimal system from diverse conveyor media and designs. As a result, you maximize your flexibility and efficiency.
As a supplement to all this, Rexroth also offers a comprehensive full program to supply materials for your production and at workstations:
- Commissioned materials can be flexibly and easily transported from storage to the workstation via material shuttles
- Small parts are ergonomically positioned in the work area with the help of grab containers
- Large and heavy containers are positioned at optimal grab heights with a case lifter
|
|
Storage space gain by removing the aisle number.
- This system is also used for FIFO running (First In, First Out)
- Productivity gain
- Easy order preparation
- Important costs saving
- Safe use.
|
|
Gravity roller conveyor
The gravity roller conveyor used as a live storage system provides the most economic solution to the LIFO and FIFO storage.
We consult, plan and produce the complete tecnology of conveyors: robust, reliable, well thought out and with the highest precision.
We also have special solutions for special applications, e. g. pallet cages, metal and plastic paletts in special dimensions.
Adapted to YOUR racking system.
|
|
|
|
|
|
Flow-Through Storage Track: FIFO
First come, first served. The goods are stored moveable on rollers and will be moved to the picking point alone by means of gravity.
Simple control of dates of use
No EDP control system, the principal is self-running
Short operator distances for order picking
Space saving compared to other storage systems
The physical separation of replenishing an retrieval optimises the sequence of operations and the use of space.
Permanently high rate of restocking on the retrieval side: goods move by themselves
Buffer Storage Track: LIFO
The LIFO-principle: the last will be the first. So the goods will be picked that have been stored last. Up to six pallets, each 1000 kg, can be inserted by means of forklifts. As normally a seperation and breaking is not necessary it is cheaper than flow-through tracks.
The advantage of the LIFO-principle is the optimal use of the space.The filling point is as well the picking point. So the shelf modules can be mounted with its back to a wall.
Upon request we supply the track incl. frame!
|
|
|
|
|
|
WIRED™
High-Density Powered Mobile Storage Systems
Inspired and engineered to provide innovative storage and filing solutions for modern workspace environments, the innovative WIRED™ high-density powered mobile storage system significantly allows greater storage capacity. With refined aesthetic and inherent design flexibility, the WIRED™ powered system distinctive functionality and appearance is unlike any other high-density powered mobile storage system line.
Thriving on continuous product innovation solutions for today’s evolving storage needs in its marketplace, Montel’s WIRED™ high-density powered mobile storage system offers the following features:
- PowerTrack™ ground embedded wiring (Patent No.: 6,845,721)
- ePulse™ Remote Monitoring
- Full Coverage Human Presence Detector
- Aisle Entry Sensor
- Sturdy Zinc Housing Floor-Level Safety Sweep (Both sides of the carriage)
- Non-Contact Distance Infrared Sensor
- Automatic battery backup override
Building on its innovative capabilities, the WIRED™'s new PowerTrack™ was developed to optimize space conservation by concealing the power wiring in the floor tracks, thus eliminating dangling scissor arms or pantographs between the mobile units. The new PowerTracks™ also bring:
- Greater space conservation
- Low maintenance
- Flexibility to create aisles of various widths
- Aisle Obstructions free for tall people or when using a ladder
- Convenience when ceilings are low
- Unparalleled visual aesthetics
|
|
|
Dynamic Storage is an Interroll division for logistic solutions in distribution centers - the "heart of logistics". Interroll flow storage technology is the fastest and most effective system for dynamic warehousing and the distribution of assorted products. There is no other distribution system, that is so easy to operate and offers such a short pay back time.
|
|
Drawer storage walls
Drawer storage walls combine all the advantages of drawer cabinets and simple shelving systems. Drawers, pull-out and adjustable shelves can be combined in drawer storage walls.
Heavy duty pull-out shelving systems
Heavy duty pull-out shelving systems are ideally suited to store heavy goods and for loading using lifting gear.
|
|
Carton Flow
Interroll's new Carton Flow Storage system provides solutions for virtually every order-picking operation. Easily tailored, this product minimizes operator fatigue and maximizes efficiency.
- Travel distances are dramatically reduced
- Increase picking performance by up to 75%
- Ergonomically designed for fast efficient access
- Maximize existing floor space
- Stock rotation is automatic and accurate
- No enery consumption
- No maintenance costs
- Fast and simple installation
- Reliable and consistent flow through
Beds with end stop
Beds with drop-out tray 5°
Beds with drop-out tray 15°
Beds with adjustable drop-out tray 0/30°
|
|
|
|
