|
|
The dynamic or stacking MRK pallet storage system lets you set up LIFO (last in, first out) or FIFO (first in, first out) systems for any kind of storage requirements.
MRK Stack Racking Storage:
Its "corridor" structure optimises volumes and surfaces, reducing service aisles and increasing storage volume by 80%. This storage system is adapted to LIFO stock management systems.
MRK Dynamic Storage:
By eliminating service aisles, the MRK increases available storage space, optimises FIFO stock management, enhances productivity, assures more compact storage for easier order preparing operations, and reduces operating costs while providing increased safety of use.
The use of this storage system is simplicity itself: The pallets are moved by gravity from the loading area to the retrieval area, reducing travel time and the risk of errors.
|
|
Rack & Roll is the successful formula for Galler racking systems with gravity roller bearings as Live Storage.
With the Rack & Roll insertion racking the pallets are stored from one side, one behind the other in the channel system and restored again. Last in - First out principle
|
|
|
|
|
|
DeepLane™ FIFO Storage Systems
That Increase Your Warehouse Capacity
A First In, First Out (FIFO) pallet flow storage system can double or triple the capacity of a warehouse. This alternative to drive-in, static racks or storing pallets on the floor is ideal for freezer warehouses, food distribution centers and storage of high-volume consumer goods.
Advantages of DeepLane™ FIFO system:
FIFO inventory control
Minimizes warehousing and handling costs
Maximizes warehouse capacity / cubic storage space utilization
Operates in temperature range -30F to 150 F
Flow Rails are composed of:
Standard flow rails constructed from 4" x 1" galvanized steel with flow wheels mounted in a single or double staggered configuration
3" diameter flow wheels are fully-spoked
Cast aluminum flow wheels are available for impact protection
DeepLane™ Centrifugal Speed Controllers (Brakes) are composed of:
All steel gears to maximize performance and life of mechanism
Oil impregnated bronze bushings at all shaft locations provide maximum support and guarantee precise gear alignment
No springs or mechanical adjustment required - Westfalia's brake tire maximizes pallet engagement by compressing and taking shape of the bottom board surface, conforming to the shape of warped or cracked bottom boards
|
|
|
|
|
|
Dynamic Storage flow storage for universal use with short pay-back time
Dynamic Storage systems and distribution centers are used in all industries: car industry, electronics, despatch of toys, pharmaceutical and cosmetics distribution, in construction materials, beverages and food distribution, etc.
The reference list includes brands as Coca-Cola, Henniez, Daimler-Chrysler, Varta, Dyson, Vespa, Bosch, Schwarzkopf, Toys'R'us, Canon , Texas Instruments etc.
The pay-back time is usually between 18 and 36 month. Additionally there are many advantages, as low maintenance, high performance, space saving, ease of control and organization, high degree of disposal, low cost and high turn over.
The rollers are especially developed for flow storage systems. The rollers used in Dynamic Storage are 60 mm diameter. Roller pitch and incline is adjusted to the goods handeld. The system guarantees the parallel smooth running of the heavy pallets - also within long lanes, which can contain up to 50 pallets.
A safety separator at the end of the lanes holds the accumulated load of several tons and allows only one pallet to flow smoothly and securely to the withdrawal place.
A speed controller, integrated in a roller regulates the running speed of each pallet position to a maximum of 0.3 m/s.
Control: The computer knows naturally how much and where goods are going in and out and where they are stored and controls the order picking and guides the operators.
The Interface to other systems and LAN is very simple.
|
|
Self cladding buildings
The Meca Rack Clad buildings lead to a cost reduction. The racks also support roof and walls, saving the cost of the steel structure of a conventional warehouse and tax advantages in front of traditional building investments.
This type of construction leads a faster completion of most projects.
All installations are fully engineered to meet local government regulations
We can design your “Building” to have differing amounts of cladding protection, from Roof only to Fully clad depending on your requirements.
|
|
BITO shelving and racking systems are produced in the plant at Meisenheim for load capacities of 50 to 4500 kg per shelf or level - for small, large, light or heavy weight, bulky or long loads, from individual shelving and racking bays to multi-tier shelving and racking installations.
The product range includes boltless and bolted shelving and racking, shelving with extra large shelves, wide span and heavy load shelving, pallet, cantilever, cable drum and drum racking, mobile and multi-tier shelving and racking, carton and pallet live storage, automated bin storage and shuttle-serviced installations for bin or tray storage.
|
|
Shelving with frame or side panels, with shelves for storage of light and medium loads.
Inexpensive, it is a polyvalent system provided for the storage of small parts and archives.
Many accessories.
|
|
The R2000, R3000, R4000 and R7000 modular shelving systems provide a quick economic solution to storage problems. They can be extended as required at any time from single- to multi-tier systems.
Modular shelving systems for all occasions.
You can choose from:
R 4000: Boltless starter and extension system can hold up to 2.5 tons
R 3000: The slot-in frame system can hold 3-5 tons
R 7000: High-bay and long-span frame system can hold up to 5 tons.
R 2000: Boltless shelving system for multi-tier shelving can hol up to 5 tons.
FR 0: Modular welded frame system
LS 600: Longspan racking system with profiles
Systems with high volume compression.
|
|
Free-standing metal section shelving: when technology sets to work for the product.
Research has been carried out to obtain the best weight-capacity-price ratio.
Entirely modular and upgradeable, it meets your most diverse product storage and filing needs in all their forms. (boxes - files).
|
|
|
ELVEDI shelving for small parts or unit loads. Easy-to-assemble, no-screw plug-in system with lots of application possibilities.
|
|
Heavy duty pull-out shelving systems are ideally suited to store heavy goods and for loading using lifting gear.
With unit loads up to 9000kg, heavy-duty pull-out shelving are the best solution for storing heavy tools and work pieces. The shelves can be loaded with the help of lifting gear. Upgrading with side and rear panels is also possible.
|
|
particularly attractive price/perforamnce ratio
boltless assembly
stepped beams are height adjustable in 25 mm increments
chipboard/steel panels are flush with the upper edge of the stepped beams
uprights are available with galvanised or epoxy-coated finish (colours: blue RAL 5010, red RAL 3000 or grey RAL 7035)
|
|
The Sall ecological containers are used for handling, depositing, transferring and storing substances that are harmful for water beds in complete safety without compromising the equilibrium of the environmental system. Besides systems built in steel, the comprehensive range also includes different types in polyethylene for handling corrosive liquids.
|
|
Shelving with Modular Drawers Model # R5SEE-874805
· 36" w x 24" d x 87" h
· 48" bank of drawers
· 10 drawers / 5 adjustable shelves
Reclaim valuable floor space by combining high density storage in modular drawers (400 lb per drawer) with Spider shelving (625 lb per shelf).
Its unique design ensures easy assembly and efficient storage. Take advantage of the many accesories created to maximize your storage capabilities and increase productivity.
|
|
Nestainer® portable storage racks combine efficiency, flexibility and safety into one versatile rack system. When not in use Nestainer racks 'nest away', converting storage space into usable floor space.
- Increased storage space utilization
- Improved labor/equipment efficiency
- Enhanced warehouse organization
- Increased handling and storage flexibility
- Improved product protection
- Safe and secure storage
|
|
|
|
|
|
"The modular tubing system "BITO ERGO" consists of a pipe diameter (this pipe gives it in two standard colors) as well as twelve standard construction units. Various Zubehöre such as adapters, role borders, rollers, wheels or threaded position feet permits the individual up, out and change of operational auxiliary facilities for production, assembly and further intralogistische operational sequence.
With the help of the flexible tubing system an enterprise at comparatively small technical and financial expenditure can Kaizen philosophy convert and optimize. This is valid not only for production and assembly enterprises, but also in the trade and in the distribution.
With the combination of modular tubing system and role borders a "dynamic" supply or continuous system becomes from simple camp or provision shelves. This supports the worker locally, by having assembly parts after withdrawal of an empty container again available and without forced break continue working immediately can. Further advantages are the shortened, ergonomic grab ways, the immediate and permanent availability of construction units, building groups and small articles, the use and reequipping flexibility of operating equipment as well as adequate storing and transporting of construction units. Thus an enterprise can avoid damages."
|
|
Efficient stock keeping of all kind of profiles or flat material like sheet and chipboard materials for direct order picking and display of your products.
Best presentation of your goods withouth sacrificing its foncionality. Careful storage and easy access for picking.
|
|
Shelf with shelves great width GFRA20.28GAB
span of départ/d? extension
HxlxP 2000x2066x824 mm
maximum loading by level 350 kg
6 panels wood
galvanized
epoxy coating
blue
|
|
All steel Ridg-U-Span wide-span shelving is an efficient, cost-effective means of storing bulk materials. When assembled, Ridg-U-Span's four basic components (upright frames, beams, supports and shelf material) create a rigid and stable hand-loaded, bulk storage system. Optional locking devices provide additional security from accidental dislodgement of beams from upright columns.
Ridg-U-Span's modular design allows a single unit to stand alone or future expansion by use of a common upright frame.
Ideal for storing or displaying medical supplies, hardware, groceries, archives, tires, garments and thousands of other parts, materials or merchandise.
|
|
|
|
|
|
Of your buildings of files to your workshop, the tubular shelf light ProfilTUB will answer the whole of your needs for installation for the storage of small volumes.
Its high level of completion (epoxy painting) like its strong modularity (great choice heights, depths and lengths) make of it an accessory impossible to circumvent of the arrangement which will follow you into your office.
Spare parts, stock-plug, supplies, consumable, files will thus find their place on flexible shelves in height with the step of 50 mm and having a capacity load going up to 250 kg.
A complement of locking of the levels is done by a plastic pin of safety avoiding any risk of unhooking.
Many supports of shelves are at disposal:
- Fiberboards compressed,
- PS white shock,
- galvanized floorings or
- above wire out of coated with zinc steel fabric.
Composition:
- Kit Departure: 4 amounts - 5 shelves - 5 tops
- Kit Continuation: 2 amounts - 5 shelves - 5 tops
Dimensions:
- Length: from 1000 to 1200 mm
- Depth: from 300 to 1000 mm
- Height: from 2000 to 2200
|
|
The cruiser-weight shelf ProfilRAC makes it possible to store heavy or bulky parts. You profit from a broad choice from heights, depths, lengths and sections of smooth.
With its flexible completion epoxy painting and its levels with the step of 50 mm, it will naturally take its place in your sales area or your workshop of storage.
Many accessories are at your disposal (perforated funds, arm of separations...) allowing as well as possible to adapt this shelf to your needs. A complement of locking is done by a metal pin of safety which removes any risk of unhooking of the smooth.
There exists an important choice of top of levels.
Composition:
- Kit Departure: 2 scales - 6 smooth - 3 cross-pieces - 3 panels wood (Agglo - ép. : 19 mm)
- Kit Continuation: 1 scale - 6 smooth - 3 cross-pieces - 3 panels wood (Agglo - ép. : 19 mm)
Dimensions:
- Length: from 1500 to 2000 mm
- Depth: from 600 to 1000 mm
- Height: from 2000 to 3000
|
|
|
|
|
|
The mobile bases allow an important space saver which can go up to 80% of surface on the ground used by a configuration in static shelves.
All the ranges of our light and cruiser-weight shelves are compatible with our mobile bases. Handling is done easily via a wheel.
A complementary system anti-discharge makes it possible to consider installations great height.
A restricted access of the installation can be carried out thanks to the locking of the mobile bases
SHELF COVERED WITH SHEET METAL
- Shaped Walls covered with sheet metal full (rolled cold 10/10e of mm). The wall is perforated for the positioning of the shelves by 4 blocks or bolts with the step of 25 Misters.
- Asymmetrical Blocks doubles face
- Shaped Shelves (rolled cold 10/10e or 8/10e mm), with triple fold ribbed (reinforcement) before and back, of dimensions 30 X 15 X 9 and fold of 20 mm at each end for positioning on the blocks. Perforated on the top Æ 8 mm (only in 10/10e), distance between centres 25 mm, departure of 50 mm for vertical separations. Only depth 360 mm for the fixing suspended files distance between centres 330 Misters.
- Completion: Epoxy powder. Aluzinc.
MOBILE BASES
- Framework of the type tallies cast solid tack welded, E24/2 steel, thickness 3 mm, tubes of 100 X 40
- Assembly of the executives between-them by nuts and bolts and fishings of reinforcement. Height of the framework 100 mm (ground - above carriage 140 mm except chock)
- Operation of the flying type with handle (2 branches Ø 370 mm) rise on cast solid casing.
- System of drive to friction by driving roller over the entire length
- Peak load: 1000kg /ml
|
|
Compactus® Electro: true simplicity in operation
The simplicity of the electronic control that powers Compactus® Electro means that convenience comes at a price competitive with wheel operated systems. A clear and simple touch panel gives you fast access to files, with a high degree of safety and operating comfort.
|
|
|
|
|
|
Wherever there's a need for storage, there's a job for Stormor Euro Industrial Shelving. From stand alone single units to multi-level storage bays, Stormor Euro Shelving is the single, simple-to-use, versatile solution.
Modular in design for ease of assembly, Stormor Euro Shelving offers almost limitless scope for the creation of customised storage facilities; and a complementary range of accessories extends its capabilities still further.
Stormor Euro Industrial Shelving features unique shelf support clips that simply slot into place giving firm support for even the heaviest loading requirements, yet allowing for quick and easy repositioning whenever required. Standard shelves will support loads of up to 200kg (440lbs) - and when even that's not enough, there's the option to specify heavy or extra heavy duty for the more demanding storage environment.
For the automotive trade, it's an ideal solution to the problem of organised small parts storage. In workshops, schools, and throughout industry, Stormor Euro Shelving provides a functional yet attractive system for all stores areas. Mobile and two-tier systems add greatly to the storage capability of retail outlets, hospitals and other space-sensitive locations.
|
|
The customized Rexroth Flow Rack System is a versatile way to supply materials and containers in a manner best-suited to your production.
The Flow Rack System can be used as a "supermarket shelf" as well as to supply containers (kanban) directly at the workstation.
You can select your optimal system from diverse conveyor media and designs. As a result, you maximize your flexibility and efficiency.
As a supplement to all this, Rexroth also offers a comprehensive full program to supply materials for your production and at workstations:
- Commissioned materials can be flexibly and easily transported from storage to the workstation via material shuttles
- Small parts are ergonomically positioned in the work area with the help of grab containers
- Large and heavy containers are positioned at optimal grab heights with a case lifter
|
|
BRUYNZEEL SHELF HI280
Shelf HI280 meets all your needs for storage and handling.
It is available in a great number of dimensions and configurations.
A broad range of judiciously studied accessories makes it possible to easily adapt this shelf to your needs.
Shelf HI280 can be installed on two levels.
Contact us for a free study and estimate!
|
|
Compactus® Office: focus on extra space
Create additional storage space or extra workplaces using the Compactus® Office system. Two-sided accessibility allows shared storage and use in open offices. To further enhance this openness, choose for a low-height version.
Compactus® Office Electro: focus on comfort
One-touch operation of the touch pad provides unparalleled ease of operation of the Compactus® Office Electro - even if you have your hands full.
Focus on design
Mobile cabinets are often hidden in archive rooms. The specially designed front panels may be finished in a range of colours and materials changing Compactus® Office and Compactus® Office Electro to fit in any office.
|
|
|
|
|
|
The Pacific Mobile is the "Filing Cabinet" for the forward thinking business of the future. These units improve filing efficiency for staff and will accommodate all of your office storage requirements. With office space at a premium, the Pacific Mobile allows for extra storage with no additional floor area needed. Alternatively you could maintain the existing requirements and allow the extra space to be sold, rented out or used for other areas within your business, improving staff efficiency and communications.
Mobile shelving is extremely efficient in saving space. The unique system eliminates the need for several access aisles. As the shelving moves along floor tracks, the space for only one aisle is needed. When an item is required the particular shelving bay is identified and an access aisle is created by moving the mobile shelving units apart.
The system is quickly and easily installed, does not require fixing to the floor, being laid directly into existing flooring even carpet tiles. This eliminates the construction work associated with conventional systems resulting in minimal disruption to your workplace during installation.
|
|
|
|
|
|
Compactus®: focus on space efficiency
Documents and materials requiring storage for years are kept in a central archive or depot. Compactus® creates oceans of storage space, taking into account your specific needs and wishes.
Compactus® Electro: true simplicity in operation
The simplicity of the electronic control that powers Compactus® Electro means that convenience comes at a price competitive with wheel operated systems. A clear and simple touch panel gives you fast access to files, with a high degree of safety and operating comfort.
Compactus® Power3: the intelligent storage solution
The more intensively a central storage system is used, the greater the demands a user makes on the level of ergonomics and safety. Compactus® Power3 offers, in addition to optimal comfort, a wide range of intelligent operating functions that guarantee safety for the operators and the stored materials.
Compactus® Double Decker: focus on ultimate space efficiency
Compactus® Double Decker offers the best space efficiency for higher buildings. This innovative concept combines all the benefits of Compactus® Power3 and a multi-tier construction.
|
|
|
|
