|
|
Stacker Crane Shock Absorbers SCS-38 to 63
ACE Stacker Crane Shock Absorbers (SCS Series) are designed primarily for emergency applications to improve the performance and safe operation of equipment such as automated storage and retrieval systems. During normal operation, the shock absorbers are required to provide only minimal resistance, but are designed to function under full load conditions when necessar y. In an emergency condition, when the velocity of the system carriage or trolley is greater than normal, the SCS shock absorber responds to protect the installation by providing controlled deceleration.
In the nor mal ready condition the piston rod is fully extended. When the impacting load strikes the absorber, the hydraulic oil behind the piston is forced out through a series of metering orifices. The number of metering or ifices in action reduces propor tionally through the stroke and the load velocity is thereby smoothly reduced to zero. The inter nal pressure and thus the reaction force remains
constant throughout the entire stroke length. The displaced oil is stored in the bladder accumulator. The integrated gas chamber, containing low pressure nitrogen, provides the retur n force to reset the rod to its extended position and functions as an accumulator for the hydraulic oil displaced during operation.
Applications include: automated storage and retr ieval systems, automotive manufacturing and production equipment, theme park rides, and small overhead cranes. |
|
For these dampers the name describes them perfectly: They ensure the safety in emergency stop applications. They are an inexpensive alternative for example on rack operation devices, conveying and crane systems.
Safety shock absorbers are maintenance free, self-contained and the majority equipped with an integrated mechanical stop. They have either an integrated membrane accumulator for volume compensation when the piston is in its compressed position or to reset the piston rod. Or you can select to use a compressed gas chamber on some models.
ACE offers safety shock absorbers with stroke lengths from 23 up to 1200 mm. We calculate and produce the layout of the metering orifices specifically to match your application.
|
|
Park Sentry™ is a simple method to add a layer of scratch-free impact resistant material around a square or rectangular column. Its slim design adds protection without adding bulk to the column. Parking structures using Park Sentry can virtually add space by inviting closer contact between vehicles and columns without the fear of scratches or dents.
Park Sentry is molded of proprietary ARPRO® material ready to be installed around the column without tools. Park Sentry is a modular product: separate corner and plank products combine to surround the column with protection. A key-lock system positions the pieces correctly and holds them together. A set of reflective polypropylene straps surrounds the entire installation, holding it firmly to the column and providing a highly visible contrasting element visible in dimly lit buildings or parking structures.
Park Sentry is 1 meter (approximately 40in.) high and can be configured to fit any sized column by adding or subtracting pieces or cutting to fit. It is available in either bright yellow or black with contrasting reflective straps. |
|
| ... products without technical information |
| |
... see all the products in the category
Labware
|
| ... products without technical information |
| |
Silvent007-L
SILVENT 007 with a Laval nozzle is the most commonly chosen alternative. A stainless steel Laval nozzle mounted onto the 007 grip handles nearly any blowing application. A Laval orifice in the center of the nozzle creates a highly concentrated air stream that moves at supersonic speed. Around the Laval hole there are a number of diverging slots that generate a powerful, quiet and laminar airflow. The combination provides superior cleaning performance and optimal utilization of the compressed air. Fins prevent direct contact between skin and the outlet holes. Fully complies with OSHA safety regulations and EU Machine Directive noise limitations. Patented. |
|
The PCVisor functions as the heart of a fully networked refrigeration plant, HVAC and BMS system. It provides a fully integrated data monitoring system and displays the information in an easy to use menu driven graphical format.
The PCVisor also provides pack controller optimisation to automatically regulate the target suction pressure of a pack compressor / pack, thereby saving energy.
The unit can be connected to a maximum of 192 controllers (6 networks x 32 devices) using Honeywell Genus® network protocols. The PCVisor permits 2-way communication, in that it can be used to retrieve and log real-time system data as well as providing the capability to remotely configure the network controller parameters.
The defrost timer facility permits sequential defrost control of up to 100 channels, thus encouraging an even spread of energy consumption over any 24 hour period. When using a gas defrost system, header station control can be synchronised over the network with evaporator defrost control thus simplifying the field wiring and maintaining accurate defrost control.
|
|
| ... products without technical information |
| |
URR
The URR water nozzle produces a pressurized water spray which canbe continuously adjusted from a powerful straight jet, to a 160° round water curtain with a 11 meter (36 feet) diameter.
Please note the capacity changes in these two extreme operating conditions.
A strong rubber ring circles the diameter immediately behind the orifice, to avoid damages due to shocks.
URS
These lances make it possible to insantly switch among three different conditions, that is closed %u2013 straight jet %u2013 adjustable full cone spray.
The two larger size models can be supplied complete with an optional water curtain, to avoid the fire fighter beoing exposed to radiant heat from the open flame. |
|
| ... products without technical information |
| |
PCM+ and PCM Transmitter
Combined with its new high performance transmitter the PCM accurately and easily locates and maps the pipeline for up to 19 miles, providing simultaneous measurement of PCM Current and Voltage Gradient, even in areas where there is contact with other metallic structures, interference, or congestion. This eliminates the need for the pipeline technician to perform direct connection 'current spans' and manual calculations to determine CP currents along the pipeline reducing false indications and minimizing unnecessary excavations. Any current leakage fault in the pipeline coating can be further narrowed down to within 3 feet by use of the A frame.
PCM Receiver, Key features
Precision Locator and PCM in one unit
- Accurate, high over-sampled measurements, 96000 Samples/sec
- 8kHz Fault Find
- Improves fault indication integrity
- Minimizes unnecessary excavations
- Identification of pickup/discharging from 3rd party CP Systems
- Low power for full day survey (2 x D Cells) |
|
| ZincTape comprises a layer of 99,99% pure zinc 80 microns thick with 25 microns of adhesive protected by a removable siliconised paper. It is available in rolls or in shapes based on the customer's needs. A feature of the new laminated zinc tape is its electrically conductive adhesive:this is achieved by incorporating a percentage of powdered zinc into the adhesive during manufacture. Since it's very easy to apply ZincTape, our product can be used in different fields, such as automotive and railway sectors, refineries, pipelines, tanks, poles and stakes and others. |
|
Trellex wear plates are the natural choice for demanding application, where abrasion, impact and corrosion occur such as in primary hoppers and truck boxes
The Trellex wear plates for medium duty applications provide high performance and lightweight wear protection in applications such as chutes, hoppers, discharge, loading and transfer points. This results
in a maximized production.
A modern working environment demands improved products for minimized risk for injuries and fatigue. Our wear plates for light duty applications help to create a comfortable working environment by substantially reducing noise. Rubber and Polyurethane are soft and lightweight materials which are easy to handle, install and remove. |
|
| Self-operated temperature regulators with wide set point ranges equipped with control or safety thermostats, typetested, also for mixing or diverting service. The temperature regulators are available with globe or three-way bodies with connection nuts as well as with flanged bodies. The control and safety thermostats have a wide set point range and can be used to form, for example, a regulator with temperature limiting or monitoring function. |
|
| ... products without technical information |
| |
SPRAY MATIC series Impregnation-Spraying Machine
(SPRAY MATIC 250/100, 300/300, 300/400, 300/600)
Spraying machine made for applying solvent or water based impregnating products, on square, rectangular, circular or shaped wooden profiles or beams.
The items are at first impregnated with the atomised product and then brushed to remove any excess primer. The result is uniform treatment and colouring of all the surfaces of the profile, without smears or stains. |
|
Vacuum-Pressure Impregnation Plants mod. IMP-VAC
(IMP-VAC 4- 6- 7- 8- 10 -12)
It is composed by two autoclaves laid one upon the other or by a single autoclave subdevided in two chambers.
The two tanks contain respectively the preservative and the wood to treat. |
|
FLEXWELL Safety Pipe®
FSR - an innovative product, tried and tested many times over
Our patented FLEXWELL Safety Pipe® provides you with a dual-wall system to transport combustible or water-hazardous media - doubly sure, monitorable and design-approved.
Areas of application
Transport of environmentally hazardous, combustible, toxic fluids and gases. |
|
|
... see all the products in the category
Hoses
|
| Safeball, a unique world wide control device at the highest safety level (cat. lllc as two-hand device with safety relay JSBR4 according to EN 574). The ergonomic shape fits all hands and gives many gripping possibilities. the safety being acheived with two switches in each ball, dual safety in each hand. There is also no need for a top cover. Safeball is connected to a safety relay or a safety PLC Pluto which gives a stop signal as soon as one or more switches are released. It also monitors that all buttons have been released and that they have been activated simultanously within 0.5 seconds for a new start. Safeball can also be used as a one-hand device. |
|
Recyclable flexible PVC. 2 different degrees of hardness:92 and 78 ShoresA, with a textured or studded surface. High resistance to wear and abrasion. Non-slip. Highly resistant to chemical products. Easy maintenance. Installation with mallet, no gluing. 6 colours. Size: 501x501mm. Thickness 7mm. Weight: 10kg/m²
OTHER IDS' MATS AND PROTECTION TILES :
- CLIP18 : Extra tough rubber tiles. Excellent thermal and acoustic protection.Installation without glue.Nonslip. Grooved underside for drainage.Easy to maintain. Natural rubber.Colour: black.M3 Fire Classification.Size: 1mx1m. Thickness 17mm. Weight 20kg
- DALLES UNIVERSALIS : Withstands cold and heat (-20°/+60°C), can be used both indoors and outdoors. Thanks to its honeycomb structure, the tile ensures ventilation when floors are wet.Easy to install.Non-slip. Weight resistance: 250T/m2. Highly resistant to chemical products. Excellent drainage. UV-resistant polypropylene.Different colours.Size : 298x298cm - thickness 11mm - Weight 3.1/3.6 kg/m²
- Translucent office mats : Extremely tough and unbreakable (100% polycarbonate), pleasant to use, fire resistant, suitable for heated flooring and for disabled persons. For carpet and hard floor mats. Easily cleaned with water. Size : 150x120,90x120,100x120cm. Guarantee 10 years. |
|
3M Safety Walk cushion matting is a straight forward and low cost solution to reduce physical fatigue and its impact on productivity.
Most of the people who work standing up all day suffer from pain and discomfort.
Antifatigue matting systems have been developed to reduce workers’ accumulated physical fatigue caused by operations where the worker stands at a workstation for long periods. |
|
| ... products without technical information |
| |
|
