|
|
These shot-blasting machines make it possible to treat the parts in bulk.
The movement of the apron retournor makes it possible to brew the parts under the jet of the turbine and thus to make sure that all the faces of the parts are exposed and treated.
The weak loads and the fragile parts are treated within an apron rubber (T-R), while the very heavy, aggressive parts with sharp or hot edges are treated in a steel steel deck (T-S).
The loading of the machine can be made by a skip and unloading by inversion of the direction of walk of the apron, on a vibrating conveyer or with band. The cycles are most of the time automatic.
Our standard range of apron shot-blasting machines retournor rubber includes capacities from 50 to 300 liters for loads going from 100 to 800 kg.
|
|
|
|
|
|
The painting of the parts of boiler making implies more and more a preparation of surface beyond the grinding of some weldings. Shot-blasting makes it possible to obtain a surface uniformly clean, and a roughness supporting hangs it painting.
In order to take into account the specific need of this industry, Wheelabrator Group developed the shot-blasting machines with load suspended of its SmartLine range.
Of cast solid design, prewired and equipped with all installations necessary (secondary filter, management by automat, etc...) the application, they answer exactly waitings of the profession.
The conveyer in Y without posts provided with 2 rotary hooks allows the loading and the unloading of parts in masked time, while a load is exposed to the jet of the two turbines Roto-Jet, in a combination of rotation and translations making it possible to granulate all the recesses of the parts.
Delivered prewired and ready with employment, they are available in 2 models (diam. loads 1000 per height 1200, or 1200 per 1600). Wheelabrator Group remains with your listening for all your applications thanks to a wide standard range, and with an unequalled experiment for the design of machines specifically adapted to your needs.
|
|
|
|
|
|
Horizontal Blast Cleaning Machine
Features Overview
Blast width 200 mm
Prepares up to 40 m2/h
Available in 230V or 400V
The Blastrac 1-8DPS30 shot blaster is perfect for small to medium-sized jobs. The 1-8DPS30 is heavy duty enough and reliable enough to be suitable for rental use. The 1-8DPS30 is a walk-behind shot blaster that when connected to an appropriate dust collector provides a virtually dust-free, environmentally friendly environment.
Prepares up to 40 m2 per hour
First model of the range with a motorized drive system
Heavy duty professional equipment
Easy to transport and handle
Reliable machine, suitable for rental
Abrasive consumption < 100 gr/m2
Application: The 1-8DPS30 walk behind shot blaster is an ideal complement to your surface preparation applications. Lightweight and portable, it can handle most small and medium-sized jobs on its own. This shot blaster is perfectly suited for concrete restoration, industrial flooring preparation, renovation, maintenance and much more
|
|
Horizontal Blast Cleaning Machine
Features Overview
Prepares up to 180 m2 per hour
Highly versatile machine
Appropriate for any size job site
Blastrac 1-10DS shot blaster offers a high level of versatility for any size job site. Its heavy duty blasting ability makes it ideal for applications such as airport maintenance and asphalt blasting. The 1-10DS is a walk-behind shot blaster that when connected to an appropriate dust collector provides a virtually dust-free, environmentally friendly environment.
High quality and strong fabrication
Abrasive consumption < 100 gr/m2
Heavy duty blasting capability
Application: The 1-10DS shot blaster is a versatile complement to your surface preparation applications. This shot blaster is perfectly suited for industrial flooring preparation, decontamination, road maintenance, asphalt blasting, airport maintenance and much more.
|
|
|
|
|
|
Horizontal Blast Cleaning Machine
Features Overview
Prepares up to 400 m2 per hour
Highly versatile machine
Appropriate for any size job site
The Blastrac 2-20DT shot blaster is a heavy duty professional machine, ideal for surface preparation specialists. This powerful shot blaster is ideal for applications such as airport maintenance and asphalt blasting. The 2-20DT is a walk-behind shot blaster that when connected to an appropriate dust collector provides a virtually dust-free, environmentally friendly environment.
Closed circuit, dust free, when connected to an appropriate dust collector
Very performing recycling system
Powerful machine equipped with 2 twin motors 11kW
Reinforced shaft
Ergonomic design and user's friendly control panel
Heavy duty professional machine, ideal for surface preparation specialists
Very efficient on all types of floors
High performances but human size machine
Increased productivity, reduced maintenance costs
Abrasive consumption < 100 gr/m2
Application: The 2-20DT shot blaster is a work horse for your surface preparation applications. This shot blaster is perfectly suited for industrial flooring preparation, decontamination, road maintenance, asphalt blasting, airport maintenance and much more.
|
|
Steel Blasting
Horizontal Blast Cleaning Machine
Features Overview
Blast width 350mm
Prepares up to 20-25m2/hr
Modular construction
The Blastrac 350E steel shot blaster is perfect for small and medium-sized jobs. Its modular construction allows for it to be easily disassembled and reassembled through a space of 600mm. For larger jobs, be sure to visit the Blastrac 500E Global.
Prepares up to 35m2 per hour
High level of operator comfort
Ideal for tank blasting
Electrical drive system
Independent drive for each rear wheel
Abrasive consumption < 100 gr/m2
Fast and efficient removal of coatings, paint, rust, and more
Application: The 350E steel blaster is an ideal machine for small and medium applications, particularly storage tank cleaning. With its modular assembly it can easily fit inside of storage tanks for cleaning and blasting interior surfaces.
|
|
International Surface Preparation offers a wide variety of wheel blast equipment in several configurations. Table wheel blast machines are one of the most versatile.
Table wheel blast machines have a table that rotates beneath a blast wheel, or series of blast wheels within a cabinet enclosure. Table machines process a batch at a time. Occasionally parts may require a two step blast cycle - once the first step is completed the parts may need to be re-oriented on the table to allow for complete coverage from the blast wheel.
These machines are well suited for parts that are fragile and part on part impingement is unacceptable. Table systems also are good candidates for parts that are large or do not lend themselves to tumbling.
Standard table blast machines range from 48" diameter table size up to 84". Table wheel blast models bigger than 84" diameter are available should your process require a larger machine.
|
|
For gas and oxygen cylinders blasting equipment is used to blastclean the insides during production and remove corrosion such as rust and scale during rebuilding.
Cylinders are positioned in the blasting stations either manually or by means of lifting gears and roller conveyors or by robot (see illustration above).
Cylinders are processed vertically to ensure that abrasive gravitates downwards.
|
|
|
|
|
|
International Surface Preparation offers a wide variety of wheel blast equipment in several configurations. One of the more popular models of wheel blast equipment is a tumble blast unit.
Tumble blast machines are comprised of either a rubber or steel flighted belt that is driven within a mill, or cabinet, as the parts tumble beneath the blast wheel. Parts are batch processed in the tumble blast.
These units can are best suited for manual loading and unloading however loaders and conveyors can sometimes be utilized to provide for a semi-automated process.
Continuous tumble blast machines are available as well. These in-line units tumble parts through a tunnel by means of a rolling belt beneath a series of blast wheels.
Standard tumble blast machines range in size from 1 ½ cubic feet up to 12 cubic feet of operating capacity. Tumble blast models bigger than 12 cubic feet are available should your production require a larger machine.
International Surface Preparation can assist you with the proper selection of wheel blast equipment that best fits your processing and production requirements.
|
|
International Surface Preparation offers a wide variety of wheel blast equipment in several configurations. Spinner hanger systems are well suited for parts that may not be tumbled or require no part on part impingement.
In a spinner hanger parts are loaded on hanging fixture and rotate in front of the blast wheels for complete coverage. The spinner hanger is a good choice for blasting parts that are delicate or are thin walled.
|
|
Shot blast machine
Overpressure model.
Tank aisled by mines services.
Capacity 200 liters.
It's delivered with:
A remote control
Shot blast pipe
Blast pipe
Air scrubber
The abrasive storage
Model on feets
Capacity for 1 or 4 blast machines
Containance: 0,5 m3 by machine
All our cabins are equiped in order to work with all kinds of abrasive.
Grader Very heavy model
Charge resistance : 5T/whell of clarck (200 x 200mm)
Advantage :
It avoids the direct shoot on the RACLOMATIC and the pass of little pieces.
It allows clarck to pass and the heavy parts to be layed down on graders.
|
|
SA 1000 S6
Satellite sandblast systems with freely scalable and rotatable satellites for individual tool processing.
|
|
Super Comet
With a No. 3 nozzle, the Super Comet cleans a path about 1-inch wide, at up to 72 inches per minute. With 20 feet of hose, the four-wheel cart moves easily on any smooth, level surface. The built-in 1/2 cubic foot, ASME-coded pressure vessel features an adjustable metering valve to handle all common non-metallic recyclable abrasives. A storage hopper holds the recovered media and refills the pressure vessel when the operator releases the remote control handle. The system has a built-in moisture separator, pressure regulator, and gauge. The dust collector houses 12 cotton sateen filter tubes.
|
|
|
|
|
|
AUTOMATIC SAND-BLAST
mod.SAT
- Max. piece size: Ø 500 x 1000 mm
- Max. loadable weight: 15 kg
CHARACTERISTICS
- 1/3/5/7/11 work stations plus a loading/unloading station
- Loading/unloading in masked time
- Cyclone for grit separation and recovery
- Linear drive unit of guns
- Automatic blowing
- PLC with operator interface for system management
- Speed adjustment of planetary gear rotation
- Gun speed and positioning adjustment
- Machine can operate with pressurized or vacuum systems
OPTIONAL ACCESSORIES
- Filtering cabinet
- Multiple planetary gears
- Optical safety barriers
- Wearproof inside coating
- Additional guns
- Sifting unit
- Automatic open/close of doors
TECHNOLOGY
SAT shot and sand blasting units have been designed for the automatic treatment of series-produced components that are to undergo cleaning, deburring (inside and out) and special finishing of materials in stainless steel, titanium, aluminum alloy, brass, plastics and the preparation for adhesion of galvanic coating. They use pressurized and vacuum shot systems according to the processing requirements, and they can be used with any type of abrasive grit or ball – glass, ceramics, steel and corundum.
|
|
|
|
|
|
6 Cuft Contractor Blast Machines
High-performance blast cleaning system removes corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings. See related literature for additional applications. Machine holds 6 cubic feet of abrasive for up to 30 minutes of continuous blasting at 100 psi with standard No. 6 nozzle (3/8-inch orifice).
Requirements for Operation
These items are required but not included with this equipment:
- Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
- Maximum working pressure 150 psi
- Minimum pressure 30 psi needed to operate OSHA-required remote control valves
- NIOSH-approved, type CE, supplied-air respirator.
- Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
- Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
- Appropriate blast suit, work boots, hearing and eye protection.
Description of Operation
The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.
|
|
-Vacuum SANDBLASTERS
-High-pressure SANDBLASTERS
-SPECIAL high-pressure or vacuum SANBLASTERS
The production of standard sandblasters - shot peening machines is completed by job production, according to customers' requirements (from large-sized sandblasting booths for several operators to PLCcontrolled satellite automatic plants).
|
|
AUTOMATED BLAST SYSTEMS
Repeatable quality and increased productivity
Multiblast® automated blast systems with multiple guns are designed and engineered to ensure a high level of process and machine control. This ensures an accurate, consistent and uniform finish to every part. By eliminating the variations inevitable in hand processing, component quality, cost control and productivity can be dramatically increased.
With Guyson’s extensive range of automated systems we are able to carefully match the machine to your production flow requirements - the systems can be designed as rotary or reciprocating machines returning the parts to the load station, as in-line systems moving the components on to the next process, or as batch systems for tumble blasting small components.
|
|
|
Protech Srl manufactures a complete range of equipment to sandblast with recovery system, fit to solve the most different problems concerning this working type. PROTECH vacuum blasting machines are trolley mounted machines, fit to carry out located sandblasting or cleaning operations without diffusing dust and/or abrasive, are capable to blast and recover instantaneously the used abrasive by mean of a special brush head. All PROTECH vacuum blasting machines are equipped with compressed air pressure reducer for the blasting force control and with pneumatic remote control to start and stop the working cycle. The remote control is controlled by an handle valve equipped with safety, locking system and pneumatic circuit with sheated double hose to prevent eventual accidental starting. Every machine is supplied with CE mark, instruction hanbook, declaration of conformity to the Machines' Directive 98/37/CE and painted with our standard colour.
|
|
For blasting different workpieces.
Equipped with pistol movement, number of nozzles.
Been suitable for pipes, plates, disks, etc..
|
|
Available types:
Mod SM - SMS
Softclean
X series
Mod SC - SCX
Mod CM - CMX
Micrajet
Complete sandblasting equipments
Modular Sanders
Each Modular sandblasting machine is equipped with a dual pneumatic or electric remote control on request. This device enables the operator, from where he is workimg, to start and stop the machine and carry out the output unblock of abrasive when it, due to moisture, is not regular. Each machine is supplied equipped with: sieve, solid rubber wheels, device for remote control to start/stop consisting of alluminium handle-valve complete with security, locking system and 20 m. of sheated hose (or cable) to avoid eventual accidental starting and it is prearranged for applying the Air-hydro-sand-blasting kit Mod.
|
|
COMPACT SAND-BLASTING
mod.SD9
- Work cabin dimensions: LxDxH in mm: 900 x 620 x 650
- Outer dimensions: LxDxH mm: 1295 x 650 x 1520
mod.SD12
- Work cabin dimensions: LxDxH in mm: 1200 x 1000 x 850
- Outer dimensions: LxDxH mm: 1592 x 1025 x 1700
CHARACTERISTICS
- Compact
- Integrated self-cleaning cartridge filter
- High-efficiency system of grit separation and recovery
- Grit flow control device
OPTIONAL ACCESSORIES
- Manual fixed rotary table
- Automatic fixed rotary table
- Manual mobile rotary table (only SD12)
- Tumbler unit
- Wearproof inside coating
TECHNOLOGY
These machines use the vacuum shot system and is fitted with an air filtration system built into the cabin, with cleaning of the cartridge by countercurrent air flow.
In addition, research by safety engineers has aimed to guarantee worker health and protection of the external environment.
|
|
KUFRA - AUTOMATIC SAND BLASTING MACHINES WITH PLC AND STEPPED MOVEMENT OF THE GLASS PLATE
Different height models: 1.300 mm - 1.600 mm - 1.800 mm (open top) - 2.000 mm (closed). Solid and epoxy-painted frame. Max thickness of the glass plate 40mm. 2 automatic guns and one manual gun. Effective recycling and filtration system provides minimum consumption of the abrasive media. PLC for a simple and fast programmation. CE brand.
|
|
|
|
|
|
COMPLETE SANDBLASTING EQUIPMENTS
COMPLETE SANDBLASTING EQUIPMENT MOD. 8-EM2 consisting of:
•Sandblasting machine mod. Micrajet 8 complete with m.4 blast hose and nozzle ø 3 mm.
•Air extension of m.10 air hose to connect compressor to blasting machine
•Nozzle ø 4 mm.
•Complete hood mod. RC4 and 1 spare parts set
•Kg.100 abrasive and abrasive fill measurer of litres 2
•Trailer-mounted Electro-compressor voltage 220 Volts mono-phase 2,2 KW
The complete blasting equipment mod. 8-EM2 is particularly suitable for the use in places or flats, provided with a 3 kw 220 volts mono-phase household meter, because, using the nozzle Ø mm.3, allows of blasting at a constant pressure between 0,05 and 4 bar, with a working autonomy from 5 to 15 min. about, therefore, allowing of carrying out the following superficial treatments:
•Blasting of metallic structures with calamine, rust and/or old paint
•Cleaning and restoration of relining brick, stone particulars , marble and granit removing old paintings, dirt, smog , calcareous deposits, graffito and cleaning of wood particulars removing dirt and smog deposits.
•Restoration of epoch cars, maintenance and / or cleaning of naval and nautical particulars.
•Cleaning of moulds, welds and copper, brass, aluminium, stainless steel handworks.
•Execution of indelible written on every kind of surface ( glass, marble, wood , plastic or abs ecc.)
It is also available the COMPLETE SANDBLASTING EQUIPMENT MOD. 8VR-EM2. Part.n 48056050 It is supplied with all components of mod. 8-EM2 except for mod. Micrajet. The model of supplied Micrajet in the complete equipment MOD. 8VR-EM2 is Micrajet Mod. 8VR.
|
|
Tumble blasters
Viking’s rubber belt blasters are ideal for high speed processing of parts than can be gently tumbled. Available in rubber belt or steel belt styles. Available in 4 different sizes.
|
|
The range of the Matravac type constitutes processing machines by impact mobiles and work in closed circuit.
Projection and instantaneous recovery are carried out directly on the level of the gun without fear of projection of dust.
According to the shape of the part to be treated, one will adapt an adequate type of brush (brushes cylindrical hairs short or long, angle brushes...)
Do not bring any more the part to shot-blasting... Amenez shot-blasting at piece-rates!
|
|
A range of blasting machine of simple and economic building site associated with a permanent stock of all the wearing parts and protection equipements of the personnel.
From 1.348
|
|
|
|
