|
|
THE DISPLAY SYSTEM MODUL 5200 -
flexible furnishing, flexible display
new tasks, new procedures, changing forms of organisation and the use of electronic media have completely transformed the professional office landscape as well as the office in the home.
mobility and flexibility are therefore the two most important requirements for the culture of work in the future
these were the considerations which gave rise to the MODUL 5200, the variable display and furnishing system for offices and shops as well as the home.
|
|
Steel structure based on Prospace+ shelving, 1000 and 1200mm lenght.
Easy assembly of the tubular level on the 1600mm hight uprights.
Shelf levels are adjustable every 40mm. Maximum load capacity per level 40 kg.
4 swivel rubber castors 125mm diameter.
Blue RAL 5019 and yellow RAL 7035 epoxy finish.
|
|
71.045
Cari-Out cart
weight : 67 lbs. - 30 kg kg
Payload capacity: 15,000 cu.in. (246 litres)
Dimensions: 21 3/16"x34 3/8x40 (538x873x1016mm)
Adjustable top shelf and back wheels.
2-5" (127mm) front wheels
2-10" (254mm) back wheels
Tech-Seal finish
FEATURES
- Retractable top shelf
- Heavy-duty frame
|
|
Customer satisfaction is the key to success. Although the quality of the merchandise is the most important factor, special care has to be taken to ensure it is correctly secured and transported.
The Caddie ranges combine ease of loading, great maneuverability, security and sturdiness.
The containers transport your turnover, do not loose a bit of it!
We place nearly a century of experience at your disposal.
The range of Caddie TRANSTOCK carts Height 1850 mm is as vast as varied. The models shown afterwards are only a selection in consideration of the numerous possibilities offered.
In addition, you can choose out of our wide range of accessories the ones which will make up the cart corresponding exactly to what you need.
Transtock with 2 panels
Transtock 3 panels & 2 wire shelves
Transtock 3 panels & 2 doors
Transtock with 3 panels
Transtock with 3 sides and 1 removable panel
Length 1200 x Width 800
Length 1250 x Width 640
Length 1320 x Width 700
|
|
|
|
|
|
The robust stainless steel construction of the carts shown - resistant to corrosion and chemicals - ensure reliability and efficiency in laboratories.
They conform with the strictest hygiene regulations due to their perfect finish which allow them to be easily cleaned and disinfected
Caddinox with 3 levels
The product in detail:
- 3 shelves
- Stainless steel 18/10
- With gallery and handle
- 4 swivel casters Ø 125 mm
- Load capacity : 75 kg
Pros:
Hygiene: made of stainless steel, they are suitable for contact with food. - They are designed for efficient cleaning to limit bacterial proliferation.
Maneuverability - comfort - protection: all models are fitted with a large handle. The trays are soundproofed. The casters are fitted with soft, silent non-marking tread. Bumpers are provided to protect interior décor.
Easy access - safety: 1 large open side lets you slide in heavy equipment. Three sides have a 30 mm edge to prevent accidents during transport.
On the model with gallery, the 4th side is closed to ensure that objects are held in place.
Product range:
Caddinox 710x430xH780
Caddinox 870x560xH870
Supercaddinox 1030x560xH880
Supercaddinox 1030x560xH950
|
|
ROLL 1091 - Display Rollcontainer
External Dimensions 1150 x 655 x h. 1790 mm
Internal Dimensions 1100 x 620 x h. 1635 mm
Capacity 400 kg
Mesh 50 x 50 mm
Accessories: inclinable shelf with box retaining edge
|
|
| ... products without technical information |
| |
|
|
|
|
|
MTM Power GmbH, the specialist for high quality power supplies, offers in its program DC/DC converters for automotive applications. The series WRC is available with 30, 60, 100 and 150 W. The converters are designed for mobile use acc. to EN 50 155, LES-DB-BN 411 002 and IEC 571-1 (railway, automotive). The battery voltages 24, 36, 72, 90 and 110 V +40/-45 % are covered with three input voltage ranges. All four power ranges have a high efficiency and are available with single or dual output voltages. The converters have an extreme high reliability (MTBF >1.000.000 h, TA = +40 °C) and an isolation of at least 2,1 kVDC (prim.-sec.). The temperature range is -40...+85 °C acc. to EN 50 155. Other important features are resistance against vibrations and reverse polarity protection at the input. The power supplies can be used in 19" racks or for wall mounting with H15 connector. The series WRC needs no ground load, is short circuit protected and has extensive monitoring and protection systems.
|
|
DCS50
Battery powered DC/DC Converters for 19 inch Rack mounting purposes are available from the Huhn-Rohrbacher Power Supply Company. The power range covers 50 to 150 watts.
* 19"-Eurostandard
* EMI Compliant Design
* 3U / 8 HP / 160mm
* Wide Range Input 2:1
* Single Output 50 Watts
* Galvanic Insulation
* CE Sign
|
|
TPCMQ48 DC/DC Converters
1U High, Up to 700 Watts with Integral Hot-Swap Provision
* 48VDC to 12 or 24VDC
* Includes Isolated 5V, ¼A Standby Output
* Hot-Swap Operation
* Wide Range 40 to 60VDC Input
* Integral LED Status Indicators
* I2C Serial Data Bus Option
* Up to 8.8 Watts/Cubic Inch Power Density
* Low Profile: 1.6 Inches (41mm) High
* Single Hot-Swappable Connector
* Reverse Air Flow Option
* Staged Pin Engagement
* ORing Diode on Output
* 1U, 19” Rack Holds 3 Units
* Active Current Sharing
* Optimized Thermal Management
* No Minimum Load
* Control & Monitoring Features
* DC to DC Converter
|
|
DC/DC 19“
Multiple output 50 - 70 watts
Plug-in Power Supplies for your 19-inch application.
– 19" plug-in module
– Primary/secondary insulation 3000 VAC
– Overvoltage protection
– Output permanent short-circuit proof
– Ripple at output < 25 mVpp
– Interference emission according to EN 55011 / EN 55022 Class B
– Outputs SELV according to EN 60950
|
|
DC/DC 19“
Single output 20 - 100 watts
Plug-in Power Supplies for your 19-inch application.
– 19" plug-in module
– Primary/secondary insulation 3000 VAC
– Overvoltage protection
– Output SELV according to EN 60950 and permanent short-circuit proof
– Remote on/off
– Parallel connection possible with load sharing
– EMC Standards EN 50081-1 and EN 50082-2
– VMEbus signals or Power-Fail available upon request
|
|
| ... products without technical information |
| |
Improving conveying safety on company premises
The benefits for you from Mink conveying solutions:
- Inexpensive fitting and easy replacement
- Easy and safe conveying of sensitive articles
- Very low friction coefficients thanks to minute areas of contact
- Flexible fibres prevent scratches, dull spots and shiny spots on the surfaces
- Individualized matching of the fibres to the weight of the articles
- Noise reduction
- Easy and time-saving insertion of the components
- No contact between the parts
- Simple retrofitting of existing transport racks
- Debris falls between the fibres
|
|
- Wire rack truss is designed with a rigid 3-point connection for maximum rigidity.
- Bulk rack beams with reinforced waterfall wire decking for maximum load capacity in
a wire deck application.
- Bulk rack beams with reinforced drop-in wire decking.
- Bulk rack beams with heavy-duty 18 gauge corrugated
- Steel deck panels.
- Versa rack shelf beams with 24 Gauge corrugated steel deck shelf.
- Wire shelf with integrated wire truss for maximum rigidity.
- Heavy duty 18 gauge solid steel shelf.
- Modular drawers come in 48 standard sizes in 200 lb. and 400 lb. capacity.
- Versarack shelf beams with drop-in wire shelf.
- Versarack shelf beams with 5/8” particleboard shelf.
|
|
An extremely versatile structure, to which a wide range of accessories can be added
A functional design that ensures it's easy to use
Part of the Rousseau solution, including Work Centers, Spider® Shelving System, Mobile and Stationary Cabinets, Multi-Drawer Cabinets, and Drawers in Shelving
45" W X 42" D X 91" H
Store up to 12 bumper covers
Can store bumper cover for small cars and trucks in the same rack
Levels are ajustable in height
Polyurethane casters do not mark floors
|
|
| ... products without technical information |
| |
ManualPresses are the economical solution for short run productions. The design of these presses is the direct result of our experience in multiple applications. They carry the hallmark of quality and precision. They provide:
Flexibility
- fast and easy set up
- quick and repeatable tool changeover
Ergonomic design
- hand lever position can be varied by 360°
- left and right hand versions available
Precision alignment
- smaller than 0.05 mm (precision ram and table bores)
Maintenance free
|
|
RACK PRESSES 400 kg / 600 kg
The rack and pinion main feature is providing constant linear power over the whole travel according to the applied load.
|
|
Manual Rack and Pinion Presses 2kN - 4kN
Sturdy and easy to operate presses
Cylindrical or V-shaped ways with adjustable stop
The press is guided by an H7 machined flat guidance
The daylight can be adjusted quickly and easily
A solid clamp safeguards the exact position of the press head
Table with wide T grooved clamping surfaces
Extended throat and height frames can be supplied but only for the 4kN HZP
The range of application can be substantially expanded by means of customer-specific accessory equipment
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
