Characteristics
The "Signal Conditioning Platforms" SCP Slim Type 2852A... is a modular system for the conditioning of a wide range of different measuring signals, ...
Characteristics
Universal and modular force plate for close to sensor signal conditioning. It is available as desktop/rack versions Type 2853A110/A120 ...
Characteristics
The "Signal Conditioning Platforms" SCP and SCP-Compact are modular systems for the conditioning of a wide range of different measuring signals, such as ...
The DIN Rail Conditioning Module (DRC) is a DC powered conditioning module that can accept a wide range of analogue ...
The OD (Oscillator/Demodulator) family of conditioning electronics is Solartron's ...
DC operation can be achieved by using a BICM in-line-condtioning ...
ADAM-3013 is a DIN-rail mounted, RTD input signal conditioning module with 1000 VDC 3-way isolation between input, output and ...
The ADAM-3000 Series consist of the most cost-efficient, field configurable, ...
The new Penny+Giles model UCM is a low voltage dc powered Universal LVDT Conditioning Module designed to operate with a wide range of LVDTs, RVDTs and other analogue inductive transducer types.
The set-up is simple and flexible, allowing user adjustment of excitation voltage and frequency, ...
The Penny+Giles model SSC is a Sensor Signal Conditioning unit housed in an IP68 protected metal enclosure. It is suitable for use with any sensor that produces a dc output signal voltage in the range 0 - 5Vdc.
The SSC also provides a 5Vdc source that may be used as a supply for many types ...
The model LVDT or RVDT Amplifier / Signal Conditioner provides a convenient and flexible solution to the measurement of displacement or position (linear or angular) when using Linear Variable Differential Transformers or Rotary Variable Differential ...
The DIN rail devices of the CR-System serve as low-cost signal conditioning modules between the field device and the control system.
A wide range ...
The DR7 is a DIN rail mounting amplifier designed to install in suitable cabinets along with other similar ...
CONDITIONING INTERFACE FOR LVDT AND HBT TRANSDUCERS
TCI 1 - CONDITIONING INTERFACE FOR LVDT AND HBT TRANSDUCERSEnlarge the imageEnlarge the image
TCI 1 is a single-channel signal conditioning module for LVDT or HBT transducers, with analog output. ...
Endevco® model 4999 low-pass filter signal conditioner is a low-noise, 16-channel signal conditioner for use with integral electronic piezoelectric, voltage transducers and Remote Charge Convertors (RCC). ...
The Endevco® model 2775B is a high-reliability benchtop signal conditioner with fixed amplitude output signal and real-time front panel level meter, for use within environmental test laboratory, aerospace test cells, ESS, calibration systems and general vibration laboratory testing applications.
The Endevco® ...
Meggitt Sensing Systems, a Meggitt group division, has announced the global market introduction of the Endevco® model 4416B, a portable, compact, low-noise battery operated signal conditioner and power supply, designed to support ISOTRON® (IEPE-type) accelerometers, prepolarized condenser microphones and preamplifiers, pre-calibrated microphone and preamplifier combination sets, and low-cost array ...
The Terminator multimode encoder signal filters complement, safeguard, maintain and extend the encoder (or pulse generator) capabilities and performance by removing all types of electrical noise (common and differential mode, dV/dt transients, ground loop generated etc.) in the encoder signal lines as well as the corrupting effects of mechanical noise and vibration (phantom movement, dither etc.). ...
Mini Multimode Encoder Signal Filters
The filters remove all types of the ever-present electrical noise (common and differential mode, dV/dt transients, ground loop and common supply generated) in the encoder signal lines as well as the corrupting effects of mechanical vibration (phantom movement, dither) in motion control applications such as multiaxis gearing in the personal care industry, ...
SG-770 offers 7 differential or 14 single-ended for surge protection. SG-770 is approved with IEC 61000-4-5 ...
Input Channels 1
Input Type Thermocouple( Type J, K, T, E, R, S, B, N, C, L, M, L2)
Resolution ...
The maximum input range is from ±1 A to +/- 50 A and can be attenuated to from ±1.6 V to ±10 V. The "I" version provide 3000 VDC intra-modules isolation and 3000 VDC ...
# Connection of up to 32 Q.bloxx modules
# via 2 UARTS, Baud rate up to 24 MBaud each UART
# Recording of up to 256 variables
# real format 4 Byte
# Synchronization and time stamp of measurement values
# Ethernet interface for configuration and ...
The Q.series has been designed for demanding
found in today's most industrial measuring and
environments. The range of applications starts from single stand
alone solutions up to networked multi-channel ...
Intelligent Instrumentation's PCI-5B series is a family of low-cost, high-performance signal conditioning products for analog input/output signals. The product line includes: signal conditioning blocks (or modules) that interface with a variety of external sensors (including voltage, current, thermocouple, ...
Intelligent Instrumentation provides several digital input and output modules and accessories providing safe, reliable interfacing to industrial test, measurement and control applications. When installed near individual field loads, our PCI-1100 series I/O modules create a rugged protective isolation barrier, effective to 4kV, between the field and your PC-based Data Acquisition system. Use of these ...
The ChronoLogic Sonda is a signal conditioning unit that allows users to customise their test, measurement, control or automation setup on a per-channel basis. The Sonda is part of the “USB-inSync™” product family, and acts as an extension of the “Legato – Universal ...
Standard Signal Modules and Signal Modules ...
KurtUSB LVDT Module
The KurtUSB LVDT Module provides direct interface to LVDT (Linear Variable Displacement Transformers) transducers. Up to four LVDT transducers can be interfaced ...
Connect sensors to your DAQ board easily.
These DIN rail mountable modules are used for signal conditioning to make your measurment signals match the input levels of your DAQ board. They have a low ...
* Constant current supply for IEPE transducers
* One channel each
* Very compact ...
This Signal Conditioning Module (SCM) is compatible with the Symphonie ...
The module serves for the conversion of encoder signals that are inducted by an encoder customary in trade. These signals can reach a level of 5V up to 24V ...
