|
|
Bottom-dump bucket covered with sheet metal or latticed of capacity 500 to 2000 liters out of standard intended rather for the light loads (plastic, paperboards). Resumption of the bucket by the top by the clamps of forks; Lever of déenclenchement with double locking with latch of safety. FRENCH MANUFACTURE
OPTION: wheels, rings of lifting, limiting device of opening, automatic system of opening, hot galvanization, lid ........
The bottom-dump bucket reduced offers an excellent Qualité/PRIX.Nous report/ratio rather recommend it for the collection of special waste légers.RéalisationS on request.
|
|
Car-tilting bucket of type "BBA"
For the collection of all your waste
Volume from 250 to 3000 liters
Resumption of the bucket on the 3 dimensioned by forklift truck or pallet truck
Control of opening by a lever has latch of safety
Interlocking of the bucket automatically by simple slope of the chechmate of the forklift truck backwards
Opitions:
Wheels, completion hot galvanization, marking, valve of draining, lid etc....
|
|
Inclined bottom bucket, Capacity from 500 to 2500 liters, integral opening of the front face; Carry equipped with 2 jacks to gas maintaining the door in open position; Order lever with double locking with latch of safety; FRENCH MANUFACTURE
OPTION: wheels, lid, hot galvanization, marking.
The tilted bottom bucket is ideal for the paperboard scrap, plastics ..... the emptying of the bucket can be done without the assistance of a lifting truck; Special achievements on request!
|
|
Waste skips tilting -
Dump trucks of type "VID-BOX"
Volume 600,900 and 1200 liters
For the collection of all types of waste
Use with a device of discharge taken again on the forks of the forklift truck
options:
wheels, lid, complete sealing, double bottom, valve of draining, marking, galvanized hot, etc .......
|
|
Standard bucket "BTR" for rotary forklift truck. All dimensions on request; Sheets ribbed on large sides and smooth on small sides, sleeves of forks for displacement and emptying with the lifting truck. Possibility of displacement to the transpallet; Possibility of having a face open on small side in particular for the storage of paperboards. FRENCH MANUFACTURE.
OPTION: wheels, hot galvanization, boltable lid in 2 parts, drainage sluice, double bottom, personalized Marking, carries label etc....
Standard bucket "BTR" is particularly economic if you have a fork-lift truck rotary, We carry out it with dimensions which meet your needs.
|
|
1011 Concrete bucket
Conical shape with straight outlet. Rugged, heavy-duty design with handlever operation of patented discharge gate. Optional approved welded-on chain or lift beam.
Options:
with bar or
hook or
approved, welded-on chain
forklift brackets
hydraulic lever operation
|
|
1092 Concrete bucket
Rectangular form with straight, inclined outlet for casting formwork.
Rugged, heavy-duty model.
Outlet within frame.
Options:
with hooks
with bar
with welded-on chain
with handwheel
|
|
1033 Concrete bucket
with release cord
Square shape with rounded corners; lateral chute or hose connector. Extra-rugged heavy-duty design with pull wire for releasing patented discharge gate. Gate closes automatically after discharge.
Especially suitable for casting formwork.
Built in accordance with international safety regulations, such as CE.
Standard version with 1.5m rubber hose.
Options:
with bar or traverse
hook or lug
approved, welded-on chain
outlet hose Ø 150mm or Ø 200mm or Ø 300mm
forklift brackets
up to 1000 litres
horizontal version
|
|
- Robust tack welded steel Construction
- Exists in 2 models: for strong density and average density - Handling by lifting truck
- Double Locking
- E.C. Conforms, validated by an organization of control
Options:
- Wheels for manual displacement
- Galvanization
- Lid
|
|
CASE HAS WASTE
- Robust tack welded steel Construction
- The use of a swing bar Requires
- Handling by lifting truck or transpallet - Stacking and possible slinging
- E.C. Conforms, validated by an organization of control
Options:
- Wheels for manual displacement
- Galvanization
|
|
CHARACTERISTICS:
- bucket AUTOSCARICANTE
- automatic > operating completely freer
- NEW system of ribaltamento
- simpler
- more express
|
|
CHARACTERISTICS:
Supplied of series with:
- settling tank
- filter sheet for the separation of the liquid and solid substances
- stopper of screw drainage for the liquids
- it rotates antinoise
|
|
A complete range specifically designed to collect and dump waste and scraps easily and safely. These containers are emptied automatically from the forklift truck by means of a lever: a solution that minimises operating times and eliminates the risk of accidents that one could meet with using traditional systems. All products in the range comply with the EEC Directive 89/392 and bear the EC mark.
|
|
|
Automatic dump truck Standard BBA "ASPI" especially designed to adapt a industielle turret of vacuum cleaner to it. Structure of the completely reinforced bucket, capacity 800 liters out of standard, lid in 2 parts with hole to fix your turret of aspiration, seal and sytème of locking of the type "Apple tree"; Resumption of the bucket on 3 sides with the lifting truck; D-enclechement of the bucket automatically by simple slope of the chechmate of your lifting truck; 2 fixed wheels, 2 wheels swivelling with brake, hanse of displacement; safety of fork allowing "to lock" your forks and thus to avoid any slip of the bucket forwards during discharge. Special achievements to measures.
|
|
2011 Tipping skip
Rectangular shape; welded construction from 3mm steel sheet with profiled edge all round. Oil-tight and water-tight; with forklift seeves.
Roller mechanism with automatic release. Can be tipped by cable without leaving the driver's seat. Secured against accidental sipping and tipping. Sturdy base frame with forklift sleeves.
Centre of gravity ideally placed to best exploit forklift's load capacity. Special side shielding protects roller-runners.
Options:
with polyamide rollers - two fixed and two steerable (2 with locking brake)
galvanised
any special colour
4 crane lugs
|
|
Metal vat with guard security body tubular or covered with sheet metal for the several barrel or installation of 1 or cubitainers, volume of retention according to the needs; sealing tested in factory; caillibotis of meshs 30 X 30 mm galvanized hot; height under foot 100 mm out of standard; Passage for displacement with the lifting truck and transpallet. Special achievements on mesure.FABRICATION FRENCH
OPTION: raise for barrels or cubitainers, coating antiacids; caillibotis out of antacid fibers, etc ..........
The standard vat of retention "Protec box" is a simple solution and ideal for your liquids requiring a retention in the event of accidental escapes (Pollution) in order to preserve our environment. Its guard of security body tubular or covered with sheet metal on 3 sides avoids the falls of your barrels in the event of displacement of the vat to the lifting truck or transpallet.
|
|
| ... products without technical information |
| |
|
|