|
|
Improving conveying safety on company premises
The benefits for you from Mink conveying solutions:
- Inexpensive fitting and easy replacement
- Easy and safe conveying of sensitive articles
- Very low friction coefficients thanks to minute areas of contact
- Flexible fibres prevent scratches, dull spots and shiny spots on the surfaces
- Individualized matching of the fibres to the weight of the articles
- Noise reduction
- Easy and time-saving insertion of the components
- No contact between the parts
- Simple retrofitting of existing transport racks
- Debris falls between the fibres
|
|
- Wire rack truss is designed with a rigid 3-point connection for maximum rigidity.
- Bulk rack beams with reinforced waterfall wire decking for maximum load capacity in
a wire deck application.
- Bulk rack beams with reinforced drop-in wire decking.
- Bulk rack beams with heavy-duty 18 gauge corrugated
- Steel deck panels.
- Versa rack shelf beams with 24 Gauge corrugated steel deck shelf.
- Wire shelf with integrated wire truss for maximum rigidity.
- Heavy duty 18 gauge solid steel shelf.
- Modular drawers come in 48 standard sizes in 200 lb. and 400 lb. capacity.
- Versarack shelf beams with drop-in wire shelf.
- Versarack shelf beams with 5/8” particleboard shelf.
|
|
An extremely versatile structure, to which a wide range of accessories can be added
A functional design that ensures it's easy to use
Part of the Rousseau solution, including Work Centers, Spider® Shelving System, Mobile and Stationary Cabinets, Multi-Drawer Cabinets, and Drawers in Shelving
45" W X 42" D X 91" H
Store up to 12 bumper covers
Can store bumper cover for small cars and trucks in the same rack
Levels are ajustable in height
Polyurethane casters do not mark floors
|
|
CONTAINERS OPTIMISED FOR STORING SMALL TANKS
maximum storage capacity: 12 small 1,000 litre tanks
Collection tray with a capacity of 1/3 rd the total storable volume
Swing or sliding doors in 50 mm thick mineral wool sandwich panels between galvanised, over paintend metal sheet.
OPTIONALS
Insulating top in 50 mm thick mineral wool sandwich panels between galvanised over painted metal sheet
For flammable liquids an optional ventilation grille equal to 1/30th of the plan surface
|
|
Metal vat of retention for the installation of 2,4 barrels of 220 liters or 1 cubitainers of 1000 liters, volume of retention 240,440 or 1050 liters out of standard; sealing tested in factory; caillibotis of meshs 30 X 30 mm galvanized hot; height under foot 100 mm out of standard; Passage for displacement with the lifting truck and transpallet; Lid assembled on 2 jacks with gas or carries beating with lock and keys. Special achievements on mesure.FABRICATION FRENCH
OPTION: hot galvanization, coating antiacids; caillibotis out of antacid fibers, etc ..........
The standard vat of retention "Protec tainer" is a simple solution and ideal for your liquids requiring a retention in the event of accidental escapes (Pollution) and that in order to preserve our environment. Its lid protects it from the bad weather, it can be thus stored in outside. Its lock 2 points prevents the access to the barrels once closed.
|
|
|
SCHNEIDER containers are reusable packaging that are designed to meet the most varied of needs and uses. The front has double-wing doors. Door opening angle 270°, end face with slot-in profiles, slot-in dimensions 50 mm to insert trays, 4-way design with all-round skids for forklifts and hand-lift trucks, stackable, etc...
|
|
Metal vat with guard security body tubular or covered with sheet metal for the several barrel or installation of 1 or cubitainers, volume of retention according to the needs; sealing tested in factory; caillibotis of meshs 30 X 30 mm galvanized hot; height under foot 100 mm out of standard; Passage for displacement with the lifting truck and transpallet. Special achievements on mesure.FABRICATION FRENCH
OPTION: raise for barrels or cubitainers, coating antiacids; caillibotis out of antacid fibers, etc ..........
The standard vat of retention "Protec box" is a simple solution and ideal for your liquids requiring a retention in the event of accidental escapes (Pollution) in order to preserve our environment. Its guard of security body tubular or covered with sheet metal on 3 sides avoids the falls of your barrels in the event of displacement of the vat to the lifting truck or transpallet.
|
|
Waste skips tilting -
Dump trucks of type "VID-BOX"
Volume 600,900 and 1200 liters
For the collection of all types of waste
Use with a device of discharge taken again on the forks of the forklift truck
options:
wheels, lid, complete sealing, double bottom, valve of draining, marking, galvanized hot, etc .......
|
|
| ... products without technical information |
| |
|
|
|
|
|
MTM Power GmbH, the specialist for high quality power supplies, offers in its program DC/DC converters for automotive applications. The series WRC is available with 30, 60, 100 and 150 W. The converters are designed for mobile use acc. to EN 50 155, LES-DB-BN 411 002 and IEC 571-1 (railway, automotive). The battery voltages 24, 36, 72, 90 and 110 V +40/-45 % are covered with three input voltage ranges. All four power ranges have a high efficiency and are available with single or dual output voltages. The converters have an extreme high reliability (MTBF >1.000.000 h, TA = +40 °C) and an isolation of at least 2,1 kVDC (prim.-sec.). The temperature range is -40...+85 °C acc. to EN 50 155. Other important features are resistance against vibrations and reverse polarity protection at the input. The power supplies can be used in 19" racks or for wall mounting with H15 connector. The series WRC needs no ground load, is short circuit protected and has extensive monitoring and protection systems.
|
|
DCS50
Battery powered DC/DC Converters for 19 inch Rack mounting purposes are available from the Huhn-Rohrbacher Power Supply Company. The power range covers 50 to 150 watts.
* 19"-Eurostandard
* EMI Compliant Design
* 3U / 8 HP / 160mm
* Wide Range Input 2:1
* Single Output 50 Watts
* Galvanic Insulation
* CE Sign
|
|
TPCMQ48 DC/DC Converters
1U High, Up to 700 Watts with Integral Hot-Swap Provision
* 48VDC to 12 or 24VDC
* Includes Isolated 5V, ¼A Standby Output
* Hot-Swap Operation
* Wide Range 40 to 60VDC Input
* Integral LED Status Indicators
* I2C Serial Data Bus Option
* Up to 8.8 Watts/Cubic Inch Power Density
* Low Profile: 1.6 Inches (41mm) High
* Single Hot-Swappable Connector
* Reverse Air Flow Option
* Staged Pin Engagement
* ORing Diode on Output
* 1U, 19” Rack Holds 3 Units
* Active Current Sharing
* Optimized Thermal Management
* No Minimum Load
* Control & Monitoring Features
* DC to DC Converter
|
|
DC/DC 19“
Single output 20 - 100 watts
Plug-in Power Supplies for your 19-inch application.
– 19" plug-in module
– Primary/secondary insulation 3000 VAC
– Overvoltage protection
– Output SELV according to EN 60950 and permanent short-circuit proof
– Remote on/off
– Parallel connection possible with load sharing
– EMC Standards EN 50081-1 and EN 50082-2
– VMEbus signals or Power-Fail available upon request
|
|
DC/DC 19“
Multiple output 50 - 70 watts
Plug-in Power Supplies for your 19-inch application.
– 19" plug-in module
– Primary/secondary insulation 3000 VAC
– Overvoltage protection
– Output permanent short-circuit proof
– Ripple at output < 25 mVpp
– Interference emission according to EN 55011 / EN 55022 Class B
– Outputs SELV according to EN 60950
|
|
| ... products without technical information |
| |
ManualPresses are the economical solution for short run productions. The design of these presses is the direct result of our experience in multiple applications. They carry the hallmark of quality and precision. They provide:
Flexibility
- fast and easy set up
- quick and repeatable tool changeover
Ergonomic design
- hand lever position can be varied by 360°
- left and right hand versions available
Precision alignment
- smaller than 0.05 mm (precision ram and table bores)
Maintenance free
|
|
RACK PRESSES 400 kg / 600 kg
The rack and pinion main feature is providing constant linear power over the whole travel according to the applied load.
|
|
Manual Rack and Pinion Presses 2kN - 4kN
Sturdy and easy to operate presses
Cylindrical or V-shaped ways with adjustable stop
The press is guided by an H7 machined flat guidance
The daylight can be adjusted quickly and easily
A solid clamp safeguards the exact position of the press head
Table with wide T grooved clamping surfaces
Extended throat and height frames can be supplied but only for the 4kN HZP
The range of application can be substantially expanded by means of customer-specific accessory equipment
|
|
| ... products without technical information |
| |
|
|
|
|
General
The models of series EA-PS 800 19” are available as sin-
gle, dual or triple output power-supplies. By combining the
synchronised-rectifer and semi-resonant converter princip-
le, an effciency of up to 92% is achieved, thus making them
highly effcient and extremely reliable as a result.
Output
A choice of output voltages between 3.3V, 5V, 12-15V and
24V at power levels of 80W, 150W and 240W are available.
All outputs, main and supplementary, are provided with a
static current limit and a power limit circuit and are stabilised
independently, making them truly zero-load compatible,
fully short-circuit- and overload-proof.
All output voltages can be trimmed within a specifc range
by potentiometers located in the front panel to accommo-
date sensitive loads, and are visualised via LEDs.
The integrated OVP protects the equipment connected
from DC overvoltage damage.
Input
A wide input range of 90 up to 264 V AC (90…360 V DC)
with active PFC (power factor correction) makes them
suitable for a worldwide usage or as isolated DC/DC con-
verters as well.
Remote sense
The remote sensing circuit located at the H15 connector
can be connected to the input terminals of the load in order
to compensate for the voltage loss across the main output
wires, ensuring a stable and precise voltage to sensitive
equipment connected.
|
|
|
|
|
|
80 Models: 16 to 1000 Vdc, 20 to 2700 Adc
FEATURES:
Series and parallel master/slave operation
High dielectric withstand: 2500 Vac
50 Hz to 400 Hz input frequency
All user interface circuitry referenced to earth ground
OVT and OCT shutdown standard
Automatic V/I crossover
RS232 interface with SCPI commands
Optional IEEE-488, RS485, and Ethernet programming
Front panel potentiometers for stepless rotary control
Front panel calibration
User friendly controls and indicators
Remote Interface Software with self-teaching features
Drivers: Certified LabWindows/CVI and LabVIEW for GPIB, Serial, and TCP/IP communications
Load dependent cooling
High power factor
CE Mark
Magna-Power Electronics TS SERIES combines the best of dc power processing with multiprocessor embedded control. A combination of high and medium frequency power processing technologies improves response, shrinks package size, and reduces cost. TS SERIES power supplies are current fed and are more tolerant to abusive loads than conventional switching power supplies.
|
|
|
|
|
|
Features:
54 Models: 5 to 1000 Vdc, 3 to 900 Adc
Series and parallel master/slave operation
High dielectric withstand: 2500 Vac
50 Hz and 60 Hz input frequency
All user interface circuitry referenced to earth ground
OVT and OCT shutdown standard
Automatic V/I crossover
RS232 interface with SCPI commands
Optional IEEE-488, RS485, and Ethernet programming
Front panel potentiometers for stepless rotary control
Front panel calibration
User friendly controls and indicators
Remote Interface Software with self-teaching features
Drivers: Certified LabWindows/CVI and LabVIEW for GPIB, Serial, and TCP/IP communications
Load dependent cooling
High power factor
CE Mark
Magna-Power Electronics PQ SERIES combines the best of dc power processing with multiprocessor embedded control. A combination of high and medium frequency power processing technologies improves response, shrinks package size, and reduces cost. PQ SERIES power supplies are current fed and are more tolerant to abusive loads than conventional switching power supplies.
|
|
1U High, Up to 450 Watts with PFC and Hot-Swap Provision
FEATURES
- Includes Isolated 5V, ¼A Standby Output
- Hot-Swap Operation
- 12, 24 or 48VDC Outputs
- I2C Serial Data Bus Option
- Integral LED Status Indicators
- Up to 5.6 Watts/Cubic Inch
- Power Factor Corrected
- Low Profile: 1.6 Inches (41mm) High
- Single Hot-Swappable Connector
- Staged Pin Engagement
- ORing Diodes on Output
- 1U, 19" Racks Hold 2 or 3 Units*
- Active Current Sharing
- Universal 85 to 264VAC Input
- Class B EMI Input Filter
- Optimized Thermal Management
- No Minimum Load
- Control & Monitoring Features
- Front-End Switcher - PCG & TPCG
- SEMI F47 Compliant at Hi-Line
|
|
|
|
see the results for the following category : 
