|
|
Olivo Cold Logistics offers a wide range of insulated containers dedicated to the transport and storage of Dry Ice.
From 55 to 600 litres, made of rotomoulded polyethylene or fiber glass,
hight insulation efficiency.
The main players in the Dry Ice Industry are using worldwide
the Olivo containers
|
|
CARGOPALLET 300, 600 and 1100 PLUS
Quality and resistance on the large scale. The Cargopallet collection is designed to cope with large loads and has two fundamental characteristics – resistance and non-deformability – that derive from the reinforcement pilasters in the bulkheads and the well-ribbed base.
Made of polyolefin resins, Cargopallet containers are inert to acids, hydrocarbons, alkalis and solvents.
Ideal for the textiles, pharmaceuticals, metallurgical, rubber treatment and plastics industries. It can be stacked and fork-lifted; available with or without wheels. Easy to clean, it does not absorb smells or damp and it can be stored in the open.
Fitted with feet, runners or wheels, it can be shifted with a transpallet or a forklift truck.
CARGOPALLET 600 PLUS OPEN: this version with a tip-up flap makes filling, emptying and cleaning even easier.
CARGOPALLET 1100 PLUS: not suitable for liquids. Also available for foodstuffs. Fitted with feet or runners.
CARGOPALLET 600 PLUS LIQUID LINER: this version is fitted with a special triple polyethylene liner. The liner is complete with filling and empting 2” valves. The liner is approved for food, and can be used for water, wine, milk, vegetable and animal oils and greases, paint, ink, glue, cosmeticians, pharmaceuticals.
|
|
A complete range specifically designed to collect and dump waste and scraps easily and safely. These containers are emptied automatically from the forklift truck by means of a lever: a solution that minimises operating times and eliminates the risk of accidents that one could meet with using traditional systems. All products in the range comply with the EEC Directive 89/392 and bear the EC mark.
|
|
The dry ice containers are manufactured from polyethylene and are insulated with polyurethane.
The effective insulation ensures that loss of dry ice through evaporation (sublimation) is reduced to a minimum.
|
|
Urba 40 is an ergonomic and stylish container with tapering shaped body and square base.
It can be used at all types of properties, either inside or outside the home or office.
Strong handle with shaped grip is perfect for handling and opening.
Vertical handle stays in the upright position, reducing the need for bending.
Lid/handle locking mechanism reduces accidents, spillage and interference
from birds and animals with 2 lid opening and 2 lid locking positions.
Handle grip on the base makes emptying easier when the bin is inverted.
The small storage space allows for fitting the container under the sink, next to the kitchen waste caddy.
Urba 40 is suitable for any waste type sorting mainly for all recyclable dry materials (glass, paper, cans, plastic, etc.).
|
|
Urba is an ergonomic range of containers with a stylish design
Extremely easy to handle and safe, with a lid locking mechanism that makes them perfect for any domestic situation.
From kitchen caddies for an easy, effortless filling of the kitchen food waste to bigger capacity kerbside bins (20, 25, 40 litres) devised for door-to-door collection.
|
|
Urba is an ergonomic range of containers with a stylish design
Extremely easy to handle and safe, with a lid locking mechanism that makes them perfect for any domestic situation.
From kitchen caddies for an easy, effortless filling of the kitchen food waste to bigger capacity kerbside bins (20, 25, 40 litres) devised for door-to-door collection.
|
|
An economic solution used to transport and carry heavy weight pieces such as raw material: highly recomanded for the storage of metallic pieces.
A resistant container, that can be equipped with a half practicable door panel.
|
|
|
Reliable and safe, Sall sheet metal containers make handling and storing large volumes of goods more rational. There are many different models to choose from, also sealed, in different shapes and sizes to meet all requirements.
|
|
|
These all welded heavy duty corrugated steel containers are built to last! Stackable and come with an under clearance of 4" for forklift entry. Three models available : standard, with hopper front or with drop gate. 3000 lb capacity. HEIGHT OF ALL CONTAINERS IS 24".
|
|
The Sall ecological containers are used for handling, depositing, transferring and storing substances that are harmful for water beds in complete safety without compromising the equilibrium of the environmental system. Besides systems built in steel, the comprehensive range also includes different types in polyethylene for handling corrosive liquids.
|
|
BPR retention Pallet Tray
NEW: The BPR is also available in 400L and 200L versions.
The retention pallet tray is made of steal and has been designed for the storage and outside decanting of liquid products that may contaminate the ground. This tray has been clearly studied to offer a secured use on the building and civil engineering sites. The BPR can store a 1000L container or two 200L barrels, or several barrels with a total capacity under 1080L, to comply with the actual legislation.
- 1 steel mesh surface with 2 different positions by manual operation:
Flat surface for a 1000L container or several tanks.
Barrel support on rollers with a latch system for two 200L tanks.
- 1 lower shelf to facilitate and secure the decanting of the products.
- 2 entry ways for a forklift truck lifting.
- 1 prehension device with 4 lifting eyes on the upper part for a crane lifting (Can only be moved with all doors closed).
- 1 mesh wired covering front door with locker.
- Lateral and rear doors for weather protection.
- The lateral walls are articulated to facilitate the attachment of the tanks or containers.
- 1 protecting roof separated in 2 removable parts to enable the crane to lift the BPR with a 1000L container inside.
- 1 document protection pocket fitted inside the BPR.
- Possibility to personalize the BPR.
|
|
Especifically designed to collect wrapping material, trimmings, off cuts, industrials wastes, generated by industrial and comercial processes.
This model is carriable on forklift truck.
|
|
MEASUREMENTS:
Height: 1460 mm.
Base: 880 x 1320 mm.
Weight: 240 Kgs.
Volume: 1200 Liters.
IT IS GIVEN WITH:
* Manual of use and instructions, as well as Declaration of Conformity CE In conformity with the Board CE 98/37.
ENDED IN:
Painted Orange Color RAL 2004. (Or another color to choosing)
OPTIONAL ACCESSORIES:
* Ended in galvanized.
* Possibility of putting wheels.
* It hooks to lift truck.
|
|
MEASUREMENTS:
Total height: 600 mm.
Useful height: 500 mm.
Base: 800 x 1000 mm.
ENDED IN:
Painted of Blue Color RAL 5010. (Or another color to choosing)
|
|
MEASUREMENTS:
Height: 670 mm.
Base: 900 x 1500 mm.
Weight Aprox. 130 Kgrs.
IT IS GIVEN WITH:
* Manual of use and instructions, as well as Declaration of Conformity CE In conformity with the Board CE 98/37.
* System of overturned for lever of way manual and placed in a wings.
* Double system of fixation to avoid I roll over accidental.
ENDED IN:
Painted Oranje Color RAL 2004. (Or another color to choosing)
OPTIONAL ACCESSORIES:
* Automatic system of overturned.
* Ended in galvanized.
* Ended in Unoxidizable steel.
* Possibility of putting wheels.
* Possibility of putting plugs (manipulation with transpalet)
* Hooking for Lifting Trucks
* Possibility of lid(snack).
|
|
Metal vat of retention for the installation of 2,4 barrels of 220 liters or 1 cubitainers of 1000 liters, volume of retention 240,440 or 1050 liters out of standard; sealing tested in factory; caillibotis of meshs 30 X 30 mm galvanized hot; height under foot 100 mm out of standard; Passage for displacement with the lifting truck and transpallet; Lid assembled on 2 jacks with gas or carries beating with lock and keys. Special achievements on mesure.FABRICATION FRENCH
OPTION: hot galvanization, coating antiacids; caillibotis out of antacid fibers, etc ..........
The standard vat of retention "Protec tainer" is a simple solution and ideal for your liquids requiring a retention in the event of accidental escapes (Pollution) and that in order to preserve our environment. Its lid protects it from the bad weather, it can be thus stored in outside. Its lock 2 points prevents the access to the barrels once closed.
|
|
Bucket-container tilting of type BBM
Detail characteristics
- Volume 500 to 2500 liters,
- Resumption of the bucket by 3 sides,
- Control of opening per lever with double locking with latch of safety,
- Possibility of adding your share a cord or a chain for a control of the remote lever,
- Interlocking of the bucket manually by the operator,
- Nongerbable Bucket,
- Enamelled Completion blue, green or gray out of standard.
Options
- 2 fixed wheels + 2 swivelling wheels with binding polyamide,
- Lids,
- Galvanized hot,
- Stainless 304 or 316,
- Valve of draining with mechanical protector,
- Personalized Marking.
|
|
| ... products without technical information |
| |
|
|