|
|
CMS Series
This bundling system is a continuous motion shrink wrapper designed for higher speed applications. Perfect for products longer than 4". The seal bar module moves with the conveyor so that products continuously move through the system.
|
|
|
|
|
|
TANGO machines produce bulls-eye wraps using both clear and printed film. These single roll, intermittent motion machines can wrap up to 20 bundles per minute and offer an array of infeed options including an inline infeed, an inline flood infeed and a side infeed. The TANGO was designed using a modular concept, and the infeeds can be changed without tools in a matter of minutes. The TANGO comes pre-programmed for the various infeeds and the electrical enclosure communicates with the infeeds via plugs, which allows for quick and easy changing of the infeed modules.
ADVANTAGES
- Low-cost print registration wrapper starting at $75,000
- Multiple infeed modules available (Inline, Inline Flood, & Side Infeed)
- Swappable infeeds with pre-programmed control panel
- Runs both clear and printed film down to 1 mil
- Uses a single roll of film to wrap products with a lap seal (NO SEAL BAR)
- High efficiency shrink tunnel conserves heat and reduces energy consumption
- Stainless steel mesh conveyor cools naturally and effectively with no sticking
|
|
MIMI UNIBLOCK P50
AUTOMATIC SHRINK WRAPPER WITH COLLATION UNIT AND STACKER FOR SOFT BAGS
This automatic shrink sleeve wrapping machine with collating unit and shrink tunnel is equipped with a stacker, which allows the collation of the product. It is capable of applying shrinkable film to stacked flexible bags containing coffee, rice, pasta, flour, feedstuff etc.
- Suitable for sleeve sealed and auto sealed film package
- Output: up to 40 flexible bags/min according to the product dimensions.
|
|
MIMI UNIBLOCK 700 NO
FULLY AUTOMATIC SHRINK SLEEVE WRAPPING MACHINE with powered side in-feed belt and pusher
This automatic shrink sleeve wrapping machine is equipped with a shrink tunnel and a powered side in-feed belt and has a pneumatic pusher capable of wrapping single products like sleeves, boxes, etc.
- Versions equipped with 700 mm – 900 mm – 1300 mm – 1600 mm sealing bars
- Suitable for sleeve sealed package and auto sealed film package.
- Output: up to 15 packages/min according to the product dimensions and film thickness.
|
|
The new series of monoblock semi-automatic and automatic shrinkwrappers with sealing bar ßetaPack are extremely versatile: they can pack various products, such as glass and PET bottles, cans, boxes, trays, jars, cartons of different sizes in a wide range of pack collations. They can be used in several industry segments, such as beverages, food, chemicals, wine and spirits, cosmetics, detergents, wood, textile, graphic etc.
The ßetaPack series allows SMIPACK to meet a wide variety of customers demands and to ensure a very good quality/price ratio.
|
|
The wrapping/binding machines mod. AT01, are used to wrap (bind) palletized products with heat shrinking film. The machine wraps, welds and cuts the heat shrinking film, thus covering the packs as they pass through it, without the need of an operator.
The machine may also be added onto existing conveyor lines. The AT01 model automatically changes the coils to continuously wrap packs with different heights thus reducing film waste. It consists of 3 mobile winding groups with selection according to the packs' height.
An upper piegafalde, which serves to arrange the film so as to obtain an optimal heat shrinking even on the upper side, is available upon request.
|
|
Easy-open pack
Coupled to the sealing bar, this system perforates the film along each side of the pack seal in order to create a tear-off strip, without reducing the speed.
90° film reel holder
This device enables quick and ergonomic changeovers by the operator.
Sealing bar
* The traveling sealing bar enables the continuous flow of products.
* The automatic top film feeding system guarantees product stability when the sealing bar descends.
* No transfer zones: single product conveyor from machine infeed to outfeed
|
|
PRODUCT COLLATION
Starwheel (AET)
· Single lane dividing system.
· Compact machine.
· Avoids problem of pressure and product accumulation.
· Protects products and labels.
· Fast and easy changeover size.
Pin-gating selection (SDI)
· Rotary continuous motion.
· Unstable products.
· Fast and easy changeover size by changing the pin-gating unit.
Pneumatic selection channels (CLP)
· Easy adjustment.
· Economic.
Registered printed films
Device allowing use of registered printed film:
. Vehicle for advertising.
· Pack decoration.
· Means of promotion.
:FLATBOARD (PC)
System to set the products on a flatboard before the film application:
· Increases pallet stability, no extra support needed on pallett
|
|
ST@R is the most advanced series of machines currently found on the heat shrink film packaging machine market.
“Top Level” electronic ST@R machine management allows high production performance.
ST@R series shrink packaging machines are designed for easy operator use. In fact, the touch screen panel can be used to control all machine parameters and production statistics, manage and modify sizes and integrally control tunnel temperatures.
ST@R shrink packaging machines are prepared for connection to a centralised production data management network. The maximum monitoring level can be reached via modem (option) to permit problem diagnosis, program settings and up-grades.
ST@R packaging machines are available in the unique frame version and in the modular frame version (option), for single line and for double line (BIG).
|
|
Model. LA
Déscription
Automatic lines for tha packaging of round, oval and rectangular products
Mod. "Lancio"
CFM + LA + BM
CFM S + LA + BM
CFM WR + LA + BM
|
|
The SW 200 PS shrink-wrapping machine is a compact, fast yet flexible machine for packaging products of regularly shape, generally the packets typical of the ice-cream and frozen foods industry.
The SW 200 PS, without sealer bars, produces bundles by arranging products in stacks or side by side, creating packs shrink-wrap palletisation, thus cutting packaging costs compared to the conventional American box.
|
|
| ... products without technical information |
| |
MIYACHI EUROPE offers a full product line of LCD/PDP TAB-Repair systems, the Emerald Series.
These systems are designed for:
- Small to large LCD/PDP panels, sizes ranging from 1" up to 65"
- A wide variety of TAB sizes and shapes
- A wide variety of PCB sizes and shapes
This highly flexible systems can be used for 3 bonding techniques (all in one system!): ACF-Tacking, ACF Final Bonding and Hot-Bar Reflow Soldering. Some of the great features of these systems are Fine Pitch Alignment down to 30 microns. This is done by dual upwards looking cameras. A high precision pneumatic bonding head with adjustable speed and force profiles ensures easy and quick access and an ultra consistent process. For more information, please download the Emerald Series Datasheet below.
|
|
Features:
- Wide Variety of Tip Shapes and Sizes
- Uniform Heating
- Dimensionally Stable
The resistance of the thermode to the flow of electrical current produces the heat required to melt the solder and create the connection. As the electrical energy flows through the thermode, the heat generated is conducted directly to the workpiece. Since most of the electrical current passes through the thermode, there is little chance of electrical damage to the workpiece.
|
|
|
|
|
|
The Desktop DT-440-PH and DT-450-PH Uni-Turn Systems are part of a line of (semi-) automatic systems developed for Heat-Stack applications. The “PH” stands for the pulsed heat Hot-Bar (alternative Constant Heat can be delivered). The model “440” has a manually operated rotary-table. The model “450” has an automatically operated 2-position turn - table.
The Desktop Series delivers the same high connection quality as the larger and more sophisticated systems. It offers an ideal price – performance (throughput) ratio. The turntable enables easy loading and unloading of the parts, directly in front of the operator. If the parts need to be aligned, it can be done in the front position where the operator or camera have sufficient free space and a view that isn't blocked by the bonding head. The manual model “440” has the same high quality rotary table as the model “450”, but with a user-friendly large handle for the rotary movement. The automatic turn-table is the model with the highest throughput (simultaneous loading / unloading and bonding) and the most controlled process (all parts movements are done automatically). The model “450” combines this with the highest user-friendliness: the operator can load the parts straight in front of him while the bonding operation (in the back side) is taking place.
|
|
Features:
- Many models to choose from
- Manual and automated systems
- Miyachi Unitek Uniflow2 Power Supply
- Manual or pneumatic bonding heads
- Thermo-plane thermodes with Quick Connect Blocks
- Linear slide or rotary motion
- Hot Bar Bonding, Reflow Soldering, and Heat Staking Applications
The Desktop Series are standard table top Hot-Bar Systems using Pulsed Heat Thermode technology for Reflow-Soldering and Heat Seal Bonding.
The DT-250 and DT-260 feature 2 or 3- position manual locking slides, respectively, easy load and unload, 2 handed operation, and sensor-selected parameters.
Miyachi Unitek's Desktop Bonders are also capable of performing heat staking. Heat Staking is an assembly process utilized in many high tech fields; it is also used in the manufacture of a variety of everyday consumer products.
|
|
The Desktop DT-250-PH and DT-260-PH Uni-Slide series are part of a line of (semi-) automatic systems developed for Hot-Bar Soldering. The “PH” stands for the pulsed heat hot-bar (alternative Constant Heat can be delivered). The model “250” has a manually operated 2-position slide, whereas the model “260” has a 3-position slide.
The Desktop Series delivers the same high connection quality as the larger and more sophisticated systems. It offers an ideal price-performance (throughput) ratio. The slide enables easy loading and unloading of the parts directly in front of the operator. If the parts need to be aligned, it can be done in the front position where the operator or camera have sufficient free space and a view that isn't blocked by the bonding head. The manually operated slide locks into place, which is detected by a sensor. The sensor confirms the correct bonding position of the part and after activation of the 2-hand control the bonding process is started.
|
|
|
The Uni-Slide stand-alone product line is a system concept with a linear product movement. The product is safely and accurately loaded, aligned and unloaded in the front position of the slide, and processed in the rear position. The linear slide is manual operated.
|
|
|
|
|
|
The stand-alone Uni-Base systems are the first in a line of (semi-) automatic systems developed for Hot Bar Reflow Soldering, Heat-Sealing and ACF-bonding. The Uni-Base delivers the same high connection quality as the larger and more sophisticated systems.
Setting up the system for different products is easy as 1-2-3, making it suitable for laboratory and high-mix production. Because of the low investment costs, earn-back time is short. Mass production environments will typically run several of these systems besides each other.
Standard available systems are:
- Uni-Base SS-W-100 with SH500 pneumatic bonding head and Uniflow Power Supply
- Uni-Base SS-W-231 with SH500 pneumatic bonding head, Uniflow Power Supply and basic manual slide
- Uni-Base PS-W-101 with PH500 motorized bonding head, Uniflow Power Supply and PLC control
For Reflow Soldering and Heat-Sealing these standard systems are using Pulsed Heat Technology (Uniflow Power Supply). For ACF Bonding a tape feeder and tape cutting module can be added. You can find more information in the PDF-file below.
|
|
|
|
|
|
AUREL AF5-AF8 Forced Convection Reflow Soldering system
Description
The AUREL AF5-AF8 reflow systems are special designed for predrying of pastes in thick film technology.
Applications
• Computer control with user-friendly software, Win 98 operating system, temperature PID control, 1000 program storage.
• Alarms for over temperature, heaters-blowers-thermocouples failure, conveyor stop and muffle open. Week timer. Light tower for status indication.
• Entrance with adjustable barrels, curtains, aspiration chamber.
• 450 mm Stainless Steel mesh belt conveyor or [optional] combination Pin Chain/Mesh Belt conveyor, width 50 to 330 mm adjustable by hand wheel or motor [optional], SMEMA interface.
Standard Features
• Controls for Air/Nitrogen, RS232 port for printer and for external temperature profiler [optional].
• 4+4 or 7+7 zones Top and Botton Heating full convection modules, long life blowers, long life and low consumption heating elements, modular design for easy service and cleaning.
• Cooling zone with Air/Nitrogen blowers, fan ventilators, exhaust aspiration, optional exhaust filtering 99.9% efficiency.
• Easy access to the machine hardware, removable panels, gas and pneumatic cylinders for complete opening of the muffle, UPS for product evacuation [optional], emergency stop buttons, interlock switches for total security, easy installation and moving by adjustable feet and wheels.
|
|
| ... products without technical information |
| |
Features:
- Many models to choose from
- Manual and automated systems
- Miyachi Unitek Uniflow2 Power Supply
- Manual or pneumatic bonding heads
- Thermo-plane thermodes with Quick Connect Blocks
- Linear slide or rotary motion
- Hot Bar Bonding, Reflow Soldering, and Heat Staking Applications
The Desktop Series are standard table top Hot-Bar Systems using Pulsed Heat Thermode technology for Reflow-Soldering and Heat Seal Bonding.
The DT-250 and DT-260 feature 2 or 3- position manual locking slides, respectively, easy load and unload, 2 handed operation, and sensor-selected parameters.
Miyachi Unitek's Desktop Bonders are also capable of performing heat staking. Heat Staking is an assembly process utilized in many high tech fields; it is also used in the manufacture of a variety of everyday consumer products.
|
|
The Desktop DT-250-PH and DT-260-PH Uni-Slide series are part of a line of (semi-) automatic systems developed for Hot-Bar Soldering. The “PH” stands for the pulsed heat hot-bar (alternative Constant Heat can be delivered). The model “250” has a manually operated 2-position slide, whereas the model “260” has a 3-position slide.
The Desktop Series delivers the same high connection quality as the larger and more sophisticated systems. It offers an ideal price-performance (throughput) ratio. The slide enables easy loading and unloading of the parts directly in front of the operator. If the parts need to be aligned, it can be done in the front position where the operator or camera have sufficient free space and a view that isn't blocked by the bonding head. The manually operated slide locks into place, which is detected by a sensor. The sensor confirms the correct bonding position of the part and after activation of the 2-hand control the bonding process is started.
|
|
|
The Uni-Slide stand-alone product line is a system concept with a linear product movement. The product is safely and accurately loaded, aligned and unloaded in the front position of the slide, and processed in the rear position. The linear slide is manual operated.
|
|
|
|
|
|
The stand-alone Uni-Base systems are the first in a line of (semi-) automatic systems developed for Hot Bar Reflow Soldering, Heat-Sealing and ACF-bonding. The Uni-Base delivers the same high connection quality as the larger and more sophisticated systems.
Setting up the system for different products is easy as 1-2-3, making it suitable for laboratory and high-mix production. Because of the low investment costs, earn-back time is short. Mass production environments will typically run several of these systems besides each other.
Standard available systems are:
- Uni-Base SS-W-100 with SH500 pneumatic bonding head and Uniflow Power Supply
- Uni-Base SS-W-231 with SH500 pneumatic bonding head, Uniflow Power Supply and basic manual slide
- Uni-Base PS-W-101 with PH500 motorized bonding head, Uniflow Power Supply and PLC control
For Reflow Soldering and Heat-Sealing these standard systems are using Pulsed Heat Technology (Uniflow Power Supply). For ACF Bonding a tape feeder and tape cutting module can be added. You can find more information in the PDF-file below.
|
|
|
|
|
|
AUREL AF5-AF8 Forced Convection Reflow Soldering system
Description
The AUREL AF5-AF8 reflow systems are special designed for predrying of pastes in thick film technology.
Applications
• Computer control with user-friendly software, Win 98 operating system, temperature PID control, 1000 program storage.
• Alarms for over temperature, heaters-blowers-thermocouples failure, conveyor stop and muffle open. Week timer. Light tower for status indication.
• Entrance with adjustable barrels, curtains, aspiration chamber.
• 450 mm Stainless Steel mesh belt conveyor or [optional] combination Pin Chain/Mesh Belt conveyor, width 50 to 330 mm adjustable by hand wheel or motor [optional], SMEMA interface.
Standard Features
• Controls for Air/Nitrogen, RS232 port for printer and for external temperature profiler [optional].
• 4+4 or 7+7 zones Top and Botton Heating full convection modules, long life blowers, long life and low consumption heating elements, modular design for easy service and cleaning.
• Cooling zone with Air/Nitrogen blowers, fan ventilators, exhaust aspiration, optional exhaust filtering 99.9% efficiency.
• Easy access to the machine hardware, removable panels, gas and pneumatic cylinders for complete opening of the muffle, UPS for product evacuation [optional], emergency stop buttons, interlock switches for total security, easy installation and moving by adjustable feet and wheels.
|
|
|
This system enables to feed in a fully automatic way strip brazing material between two metallic pieces to be assembled. Method widely used in the joining of copper parts. Self-running device : supplied as a kit, with its own PLC, it can be mounted on every existing spot welding machine. More than a feeder of brazing strip, this system also gives you additional quality controls : control of the brazing presence before welding and control of the melting of the strip.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
