|
|
|
NADELLA confirms the aim to provide manufacturing solutions tailored to the user's needs in order to achieve simple automation at a low cost. The process under way of transferring production automation and relevant handling onto increasingly heavier and cumbersome units has prompted us to seek original and flexible components for the different commodity sectors.
|
|
The MONORACE system is a rigid linear system, used with one or two rails. The system is composed of MRL-MRS-rails and RV guiding sliders, which contain guiding rollers type RCV-REV. The slider is composed of a ground steel body with protective surface treatment.
The sliders come standard with 3 either 5 ROLLERACE rollers.
Thanks to optimized design, the Monorace system guarantees load and moment capacities significantly higher than its competitors, within the same compact dimensions. When used as single rail, the system allows for loads and moments in all directions.
When more than one rail is used, the rails must be well aligned to assure smooth movement and to eliminate binding.
The rails are available in three sizes: 18mm, 28mm, and 43mm in order to meet a wide range of load capacity requirements.
|
|
Ball rail systems in miniaturized configuration
These products are designed for any application that calls for ball rail systems of extremely small size and high load capacity.
The wide range of Rexroth mini ball rail systems covers sizes 7, 9, 12, 15 and 20 mm, and is available in widths of 9, 12 and 15 mm.
|
|
Miniature linear rail
SBM miniature type have compact design, low friction, and high rigidity. SBMW miniature with increased balls and widened rail has increased the rigidity against moments and achieved the greater load ratings.
|
|
|
In response to the market trend for increased performance with a minimum of mounting space, SKF has extended its product range by a miniature profile rail guide. In total SKF offers seven rail sizes and fourteen different types of carriages. Miniature profile rails are universally applicable and preferably used in automation technology, electronics production, medical engineering and precision mechanics.
|
|
|
LZM miniature slides provide an ideal solution for precise and short strokes in compact frame dimensions to be used in medical, measurement and micro mechanics applications. Smooth motion and running accuracies of 2µm over 100mm stroke are possible, depending on the application.
|
|
|
These systems employ round shafting, aluminum bodies and dual, angular contact - sealed for life - roller bearing wheels. Each has built-in preload adjustability. SPEED DEMONS are capable of speeds up to 10 meters per second. SPEED DEMONS are easy to install, lightweight and inexpensive.
|
|
The SBG(S)-linear guides adopt existing 4 row circular arc internal geaometry and can therefore interchange with any carriage now operating on SBC standard rail profile.
Self-aligning or floating ball retainer plates
The new ball return tube plate
End plate
End Seal
|
|
Intechangeable with other manufacturers NOOK Precision Profile Rail Linear Guide Systems provide stable and efficient linear motion guidance under variable speeds and high load conditions.
NOOK Precision Profile Rail runner blocks are available in two designs. One runner block design utilizes steel return tubes for ball recirculation and the other utilizes a plastic end cap for ball recirculation. The tube type recirculation system enables the runner block to be used for higher speed applications. The plastic end cap runner block is narrower in width than the return tube style block. Eight different models are available to meet the requirements of height, loads, mounting holes, etc.
|
|
BALL BREARINGS LINEAR RAILS are made of RUNNER that moves in a fixed RAIL.
Designed for load capacity from some kg to 600 kg PER RUNNER, the common length of the rail is 3 meters. It can be 5 meters for some references. Should some applications need very great lengths, the rails can be prepared for an end to end mounting.
Linear rails is the optimum solution for protective or access DOORS applications (machine tools, vehicles, trains or subways) .
|
|
|
These systems employ round shafting, aluminum bodies and dual, angular contact - sealed for life - roller bearing wheels. Each has built-in preload adjustability. SPEED DEMONS are capable of speeds up to 10 meters per second. SPEED DEMONS are easy to install, lightweight and inexpensive.
|
|
Is it taking too long to make a fixture to increase production?
Mitee-Bite Products makes fixture building easier and quicker with the addition of ready made locating rails.
Mill a slot in the fixture plate to locate the rail and drill and tap the mounting holes. The height of the rails can be adjusted by the depth of the slot. Steps can be machined on the rails to hold the work piece above the fixture plate or a radius can be machined to match the contour on machinable clamps for irregular shape parts.
Locating rails are made of low carbon steel, precision ground square and are available in a number of sizes and lengths to suit most applications
|
|
The TLR and TLQ rails are the world's only telescopic rail system which incorporates self-aligning feature to absorb parallelism errors of the mounting surfaces.
The TLR telescopic rails are designed for heavy duty High-Tech telescopic
applications, with precise motorized movement, requiring constant smooth sliding performance with no play. The special smooth operating performance is due to double-row precision bearings, strong rails with hardened and honed raceways, fixed to a rigid intermediate S-shaped steel
plate, assuring high load capacities and low deflexion at even fully extended position. The TLR telescopic rails assure unique self-aligning capability, when used in pairs.
|
|
Linear guidance series MLF 1
Linear guide rail (L 30 X H 20 mm)
2 steel rounds of precision (diam 8mm)
Profiled closed out of extruded aluminum with anodization
Weight: 1,61 kg/m
Series MLF
Series DSF
ELF series
Series LF
Series ILF
Series LGR
|
|
Find permanently on stock:
- Roller OUT-LINE Guidance
- Guidance with rollers OUT-LINE cuts single
- Simple roller OUT-LINE Guidance
- Roller IN-LINE Guidance
On request, following plane and schedule of conditions we carry out all types of specific systems
|
|
|
|
|
|
Castor guidance
Particularly for applications with those it on small friction and small noise arrives the new castor guidance SG and OSG was developed.
The execution SG offers a particularly compact building method, since the castors run in a channel from aluminum with inserted hardened waves. The load-carrying capacity of the system can be changed thereby by the number of castors.
The execution OSG possesses a base from aluminum with inserted hardened waves. The castors are outside employed with this design.
The castors can very sensitively be employed and so the running properties excellently to application be adjusted by the eccentric execution of the castor axles.
The rails are manufactured in 4 m length and can be shortened depending upon need or also built up. When desired the waves can be manufactured also from rust-steady material.
Typical applications for these linear guidance with castors are packaging machines, sliding doors and simple economical linear units with small loads.
|
|
|
|
|
|
The innovative linear system of the T-Race Family is setting new standards in the world of roller-based linear systems and telescopic rails. Thanks to the outstanding design of raceways and sliders with the possibility of self-aligning (principle of guiding and loading slider) with only one type of raceway the T-Race system offers many advantages of storekeeping, construction and economy.
Typical applications for cam roller units are for example machine doors, tool changers, handling systems and high quality drawers.
The roller-based system is available in raceway sizes 18, 28 and 43 mm. By combination you can build different variations, for example telescopic rails.
Advantages of the T-Race roller-based system:
• Roller-based system with improved load capacity
• Self-aligning system with adjustment of the preload
• Easy assembly, compensating of assembly/structural errors
• Acceptance of radial and axial loads
• Only one type of raceway (guiding and loading slider)
• Hardened and corrosion resistant surface
• Comparable load capacity with smaller size
• Self-lubricating system for all sizes
• Sliders with 3 or 5 rollers
• Low friction
|
|
|
|
|
|
Miniature Linear Guide Series
The miniaturisation in the assembling technology is going ahead. This makes sense to develop new miniature linear guide systems for such tiny applications.
There are now reliable linear guide systems with ball circulation available. Even for the smallest mounting activities. The new assortment of miniature guide systems start with a rail width of 3 mm. The complete range of miniature guides consists of rails in size 3, 5, 7, 9, 12 and 15 mm width.
To this product range fits also a complete range of wide rails available. The width of the rails is about 3 times the dimension of the standard rails. This design has big advantages in applications where you are not able to use 2 rails in parallel. This rails and carriages can accept very high moment loads on a very small space and make a very compact design of linear drive units possible.
A patented ball return system is responsible for a very smooth and quiet movement also at high speed. The carriages have a special ball retainer to keep the balls inside the carriage. The balls don%u2019t get lost when you remove the carriages from the rails.
|
|
Standard HR automation series
cpc AR/HR Ball Type Linear Guide Series design incorporate four rows of re-circulation steel balls arranged in the O-type and 45º contact angle with the raceway. The rigidity of track rail under moment and torsion is very much increased by adopted the O-type design.
Although it is same in dimension constrain, devise larger diameter and more amount of steel balls, provide higher load capacities, moments and rigidity owing to its design.
|
|
Wide AR automation series
cpc AR/HR Ball Type Linear Guide Series design incorporate four rows of re-circulation steel balls arranged in the O-type and 45º contact angle with the raceway. The rigidity of track rail under moment and torsion is very much increased by adopted the O-type design.
Although it is same in dimension constrain, devise larger diameter and more amount of steel balls, provide higher load capacities, moments and rigidity owing to its design.
|
|
Rexroth offers a comprehensive range of profiled rail system products.
As an end-user, you will always find that Rexroth stocks the right product for your specific needs.
Ball Rail Systems
Rexroth ball rail systems are ball-bearing longitudinal guides. They are available in eight common standard sizes. Our customers fit them to machine tools, industrial robots and to an extremely wide range of special machines.
|
|
Order number Download L n W (kN) Wl (kN) Wt (kN) Mw (Nm) Ml (Nm)
LG-008-400 400 7 10 2 3 150 300
LG-008-600 600 11 10 2 3 150 300
LG-008-800 800 15 10 2 3 150 300
|
|
Rexroth Cam Roller Guides have been specially developed for use in materials handling and automation technology applications.
They stand out thanks to their high permitted maximum speeds, compact design, extremely low weight, simple installation and low friction.
Their extremely quiet running performance represents yet another advantage.
The user can obtain each element as an individual item, if required.
|
|
MR Miniature Linear Guide Series
High load, high moment function
Steel plate reinforcement design
Unique ball re-circulation design
Dust proof design
Embedded inverse hook design
Lubrication storage design
Precision : MR Miniature Linear Guide series have three accuracy options for design choice. There are Precision(P)、High(H)、Normal(N).
Material : MR Miniature linear Guides series regardless of rail, Steel body of carriage or ball, all are made with heated treated stainless steel.
|
|
Ball rail systems in miniaturized configuration
These products are designed for any application that calls for ball rail systems of extremely small size and high load capacity.
The wide range of Rexroth mini ball rail systems covers sizes 7, 9, 12, 15 and 20 mm, and is available in widths of 9, 12 and 15 mm.
|
|
|
|
|
|
Yitong linear guideway – Compact rails - miniature linear guide.
Yitong compact rail linear guide system consists of a separated sliding carriage and a guide rail.
The guide rail is made of high quality carbon steel.
The sliding carriage is mounted with three pieces or more high quality LV series track rollers, two rollers are fixed on the block, and others are all with eccentric functions.
The sliding carriage could be dismounted from the rail very easily, which makes this guide system extremely convenient in mounting and adjusting.
The guide rails and the carriage block are all drilled with mounting holes, easy for mounting and less space required.
The preload of this Compact rail system could be adjusted freely to meet various application requirements.
This Compact rail system has a long service life. Track rollers are available on stock for customers’ replacement.
Custom drilled services on the rails are also available from YITONG.
Designation:
LTV-28-XXXX-X
LTV Code of Compact linear rails
XX: Width of the rail, e.g. 28 means the width 28mm.
XXXX: Length of the rail (mm).
X: Number of the rollers mounted on the carriage, 4 means 4 pieces (standard type is mounted with 3 pieces of roller, not specified.)
|
|
ST Miniature Stroke Slide Series
High load and high moment capacity
Double side pair block plate design (Dual block plate design)
High running accuracy and smoothness
Easy mounting
Temperature
Anti-corrosion feature
|
|
RoundRail
Thomson Round Rail has been a fixture in the industry for over 50 years. Offering the best in quality, delivery and price Thomson Round Rail is the industry standard in a vast array of demanding applications.
Round Rail is chosen much like any other machine component. Machine builders spec out the design, define the objectives of the system and work from past experiences to build a better system. Thomson Round Rail makes this process even easier as it requires only one part number to specify the entire linear guide.
Thomson Round Rail is available with 60 Case, LinearRace Shaft end support blocks in either light weight aluminum or rigid iron materials. Used to provide increased stability or torque resistance in linear system applications, Thomson is the one and only name you'll need when choosing your round rail solution.
|
|
|
The Thomson Profile Rail assortment consists of the next generation Profile Rail 500 Series ball and roller linear guides, AccuMini, compact miniature MicroGuideTM, and lightweight T-Series. It is a complete offering of rails and carriages in a broad range of styles, sizes and unique features produced to industry standard dimensions for easy retrofitting into existing applications or designing into new applications.
|
|
|
|