|
|
E6M+ BlackPower®, a 156 mm x 156 mm silicon solar cell, features high energy yields and sustainable efficiencies of more than 17%.
In addition, these ersol monocrystalline cells are easy to use, exhibit high mechanical stability and perform well under diffuse light. Thanks to their uniform black exterior, E6M+ cells are specially suited to solar systems with critical architectural requirements.
|
|
E6+ multicrystalline solar cells offer excellent properties for the exploitation of solar radiation. These 156 mm x 156 mm silicon cells achieve up to 16% efficiency and perform well under diffuse light conditions.
Because our large-format cell technology provides cost benefits for module assembly, the E6+ is an attractive component for module manufacturers as well as for assemblers and end users of photovoltaic systems.
|
|
SOLEMS low light solar cells are directly converting any light into electricity. They can supply DC current to low consumption electronics : watches, calculators, measurement units, ... and other technical products shown in the "applications" section of this website.
- Thin-film solar cells from 0 to 200cm².
- Excellent sensitivity under low illumination, even artificial light
- Ideal for indoor use, but also suitable for outdoor use under sunlight, with additional climatic protection
- Glass substrate, 0.5 to 2mm thickness, rectangular shape
- Operating voltage : 1.5V, 2.5V, 5.5V or another on request
- Applications : low consumption electronics : CMOS circuits, LCD, watch movements ...
|
|
Product Features:
- Excellent SiNx coating
- Excellent spectral response in short and long wavelength
- No residual dark point
- Strict measurement of reverse current to avoid hot spot
|
|
Product Features:
- Excellent SiNx coating
- Excellent spectral response in short and long wavelength
- No residual dark point
- Strict measurement of reverse current to avoid hot spot
|
|
Features
. High-efficiency solar cells with an isotropically etched surface
. Silicon nitride antireflection coating
. Silver front contact bars and full-surface aluminum back contact field
Production and Quality Control
. Proper handling from incoming inspection through production, outgoing inspection and packaging
. 100% tested with +_3% test accuracy
. 100% checked for reverse current and visual appearance
. Calibration by Fraunhofer ISE
Packaging
. Special design minimizes the risk of cell damage
. Label with product information
|
|
With management team strong in science and business, we provide high-performance cells made of mono- and multi-crystalline silicon with especially even surface that yield very low breakage rates and lose the minimum power after module lamination. Being an active member of the global solar energy community, NSP has worldwide delivery base and has been working with world PV leaders in technology collaboration and supply chain management. NSP solar cells have five advantages:
Minimum power loss after module lamination
Very low breakage rate
Mono-like appearance (NP6 series)
Great soldering ability
Environment friendly and ROHS compliance
|
|
With management team strong in science and business, we provide high-performance cells made of mono- and multi-crystalline silicon with especially even surface that yield very low breakage rates and lose the minimum power after module lamination. Being an active member of the global solar energy community, NSP has worldwide delivery base and has been working with world PV leaders in technology collaboration and supply chain management. NSP solar cells have five advantages:
Minimum power loss after module lamination
Very low breakage rate
Mono-like appearance (NP6 series)
Great soldering ability
Environment friendly and ROHS compliance
|
|
Solarfun modules are each built using 100% Solarfun cells. Thanks to our large manufacturing capacity, we are also able to provide PV cells for end users.
125 x 125 (5") Mono
Efficiencies up to 17.2%
|
|
Solarfun modules are each built using 100% Solarfun cells. Thanks to our large manufacturing capacity, we are also able to provide PV cells for end users.
156 x156 (6") Mono
Efficiencies up to 17.2%
|
|
Product Features:
- Excellent SiNx coating
- Excellent spectral response in short and long wavelength
- No residual dark point
- Strict measurement of reverse current to avoid hot spot
|
|
Features
. High-efficiency solar cells with an isotropically etched surface
. Silicon nitride antireflection coating
. Silver front contact bars and full-surface aluminum back contact field
Production and Quality Control
. Proper handling from incoming inspection through production, outgoing inspection and packaging
. 100% tested with +_3% test accuracy
. 100% checked for reverse current and visual appearance
. Calibration by Fraunhofer ISE
Packaging
. Special design minimizes the risk of cell damage
. Label with product information
|
|
With management team strong in science and business, we provide high-performance cells made of mono- and multi-crystalline silicon with especially even surface that yield very low breakage rates and lose the minimum power after module lamination. Being an active member of the global solar energy community, NSP has worldwide delivery base and has been working with world PV leaders in technology collaboration and supply chain management. NSP solar cells have five advantages:
Minimum power loss after module lamination
Very low breakage rate
Mono-like appearance (NP6 series)
Great soldering ability
Environment friendly and ROHS compliance
|
|
Solarfun modules are each built using 100% Solarfun cells. Thanks to our large manufacturing capacity, we are also able to provide PV cells for end users.
156 x 156 (6") Poly
Efficiencies up to 16.2%
|
|
Solarfun modules are each built using 100% Solarfun cells. Thanks to our large manufacturing capacity, we are also able to provide PV cells for end users.
125 x 125 (5") Poly
Efficiencies up to 16.2%
|
|
|
JSC "Kvazar"'s principal product range is represented by mono-and multicrystalline silicon cells. The company has a great experience in cell production, as it has been manufacturing them for more than 10 years. Our production operates within a closed cell cycle.
|
|
|
JSC "Kvazar"'s principal product range is represented by mono-and multicrystalline silicon cells. The company has a great experience in cell production, as it has been manufacturing them for more than 10 years. Our production operates within a closed cell cycle.
|
|
We are the one of just a few companies building monocrystalline Solar Cells on both P-type and N-type Si. This approach results in the enhanced cell output parameters as well as the wide range of applications, all achieved at low affordable price.
Solar Wind manufactures various pseudo-quadratic cells with the typical dimensions of 103.5x103.5 mm (diametr 125 mm and 135 mm), 125x125 mm (diametr 150 mm), 175 x 150 mm (diametr 200 mm), partial cells are available too.
|
|
|
USL manufacturers high performance low-cost silicon solar cells that are designed for terrestrial applications. These solar cells have screen-printed silver front side and screen-printed silver-aluminum back side for better soldering. Textured front surface makes it possible to collect maximum sunlight and hence improved performance.
|
|
|
USL manufacturers high performance low-cost silicon solar cells that are designed for terrestrial applications. These solar cells have screen-printed silver front side and screen-printed silver-aluminum back side for better soldering. Textured front surface makes it possible to collect maximum sunlight and hence improved performance.
|
|
Product features:
- High and stable efficiency in photovoltaic conversion Advanced diffusion technique ensuring the homogeneity of energy conversion efficiency of the cell.
- Advanced PECVD film forming, covered by dark blue silicon nitride anti-reflection film, it is in homogenous color and beautiful appearance.
- High quality metal paste for making back surface and electrode, ensuring good conductivity, higher pulling strength and soldering easiness.
- High precision patterning by screen printing, easy for the soldering machine to proceed with automatic soldering and laser cutting.
|
|
Features:
- KPE-Cells are high efficiency silicon cells based on our own cutting-edge technology in cell fabrication process.
- KPE solar cells offer essential advantages of the module manufacturer.
|
|
|
Solterra solar cells are the result of years of research in the field of new technologies. We produce high efficiency cells according to state of art in PV production, using the most updated industrial automatism in clean room. All our cells can be used for every application.
|
|
| ... products without technical information |
| |
|
|
