|
|
|
|
|
|
Our solar laminate AKASOL® is a combination of TEDLAR® PVF films and other polymer films. Because of the outstanding mechanical, electrical and chemical properties as well as the extraordinary resistance to weathering, our solar laminated films ensure effective protection for the sensitive photovoltaic modules throughout the long service life.
AKASOL® laminated films are manufactured in to give a variety of designs from polymer film and/or TEDLAR® films. The most common material for the inner layers is PET film with a thickness of 75 µm, and the outer layer is usually a PVF film 38 µm in thickness. Alternatively a 25 µm PVF film can be used as the outer film. PET films are dimensionally stable, moisture-resistant and are characterised by their outstanding electrical insulation properties whereas PVF films assure dependable protection from UV radiation.
In the case of transparent photovoltaic laminated films, particular attention is paid to good light transmission. It is for this reason that we also supply combinations with ETFE films for extremely high transparency. As these laminates have to be particularly thin, PET film with exceptional stability to moisture is used here.
|
|
THIN FILM PHOTOVOLTAICS: THE NEXT EVOLUTION OF SOLAR TECHNOLOGY
Sharp’s thin film product pairs amorphous silicon with a layer of microcrystalline silicon to achieve high stability and performance. Produced with less than one percent of the silicon used in crystalline solar cells, thin film products offer high performance with less semiconductor material. With a low temperature coefficient for output power, thin film generates greater energy than its crystalline silicon counterpart in geographic regions where temperatures are high. In warm climates, this translates into more kilowatthours per kilowatt. Certified to IEC 61646, these modules are not UL-listed and are exclusively for behind-the-fence applications.
|
|
Description
The Military Solar Temper Fly field shelter provides 750 Watts of solar power to recharge a bank of batteries, and also provides shade from the sun to reduce solar heat load and protection from rain. Same size and material as standard Temper Fly field shelters.
Developed with Eureka Tents of Johnson Outdoors and FTL Design Engineering Studios
|
|
Description
The Military Solar Power Shade field shelter provides 1 Kilowatt of solar power to recharge a bank of batteries, and also provides shade from the sun to reduce solar heat load up to 80-90%. Fits over MGPTS, TEMPER, and ISO Storage.
Developed with Eureka Tents of Johnson Outdoors and FTL Design Engineering Studios.
|
|
Description
The Military Solar Quadrant field shelter provides 190 Watts of solar power to recharge a bank of batteries, and also provides shade from the sun to reduce solar heat load and protection from rain. Fits over standard Temper Fly field shelters, drapes over other structures or vehicles, or stretches out on the ground.
Developed with Eureka Tents of Johnson Outdoors and FTL Design Engineering Studios.
|
|
|
PowerFilm is integrated with standing seam metal roofing and is conformable to a variety of architectural styles. The low profile and flexibility of PowerFilm enables it to be incorporated with innovative straight or curved architectural structures. PowerFilm not only provides power but also enhances the overall building design.
|
|
| ... products without technical information |
| |
VACUOPLEX™ and VACUOPEEL™™ allow an exceptional economy of time at
each level of the process :
> Purchase and storage department :only one product to manage.
> Production department :only one product to prepare and apply.A 3 products combination with :
• a peel ply
• a perforated film
• a breather/bleeder felt
|
|
Perforated Release films
Low temperatures application
Belonging to the polyolefin family, these films have a good chemical and thermal resistance for a low cost.
Release films with a large range of resins.
Do not use with autoclave process.
High temperatures application
Belonging to the fluoropolymer family, these films have a very good chemical and thermal resistance.
Release with all resins.
Recommend for autoclave process.
|
|
Supple bagging films are recommended for the moulding of elaborate forms.
Advantages : good mechanical and chemical resistance, important Elongation rate, non porous, cost...
|
|
INFUPLEX is a multilayer system used in manufacturing processes for vacuum infusion of composite materials.
Vacuum infusion of composite materials involves using a number of vacuum consumables that have an effect on the fabrication and quality
|
|
| ... products without technical information |
| |
|
|
|
|
Argweld® Water Soluble Purge Film
For the manufacture of pipe purging dams, Argweld® water soluble film is now available.
The British manufactured product comes in a kit comprising:
A 20 metre length of 1 metre wide film folded in half and wound on a spool.
Two bottles of the adhesive.
A slitting knife to quickly cut the dams.
A comprehensive manual with instructions for use with hints and tips for weld purging.
The use of water soluble film for manufacture of purging dams is well proven and the Argweld® film gives superior results over all other water soluble products
It can be used for stainless, duplex and chrome-moly steels, as well as titanium.
The Argeld® purge material makes dams which produce an impenetrable purge barrier, but which can easily be washed away when hydrostatically testing the pipe or just by normal wash out.
It dissolves away completely without leaving any fibres to clog up filters or other sensitive parts in a system and it is strong in all directions so that it can maintain a good gas barrier throughout the purging process.
Trace element certification can be provided to show that purge film does not contain any harmful elements and that the quantity of halides is well below the permissible levels.
The film and adhesive are completely biodegradable and all packaging materials are recyclable.
Further information can be downloaded in PDF form available in our download section.
Contact our factory for more details on bulk order savings.
|
|
|
|
|
|
Argweld® Water Soluble Purge Film
For the manufacture of pipe purging dams, Argweld® water soluble film is now available.
The British manufactured product comes in a kit comprising:
A 20 metre length of 1 metre wide film folded in half and wound on a spool.
Two bottles of the adhesive.
A slitting knife to quickly cut the dams.
A comprehensive manual with instructions for use with hints and tips for weld purging.
The use of water soluble film for manufacture of purging dams is well proven and the Argweld® film gives superior results over all other water soluble products
It can be used for stainless, duplex and chrome-moly steels, as well as titanium.
The Argeld® purge material makes dams which produce an impenetrable purge barrier, but which can easily be washed away when hydrostatically testing the pipe or just by normal wash out.
It dissolves away completely without leaving any fibres to clog up filters or other sensitive parts in a system and it is strong in all directions so that it can maintain a good gas barrier throughout the purging process.
Trace element certification can be provided to show that purge film does not contain any harmful elements and that the quantity of halides is well below the permissible levels.
The film and adhesive are completely biodegradable and all packaging materials are recyclable.
Further information can be downloaded in PDF form available in our download section.
Contact our factory for more details on bulk order savings.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
 see the results for the following category : Capacitors |
|
|
