|
|
SX 375 J
Typical applications: Off-grid and instrumentation
Key features: Instrumentation, off-grid, robust with j-box for field wiring
Cell technology: Polycrystalline
Dimensions: 1209mm x 537mm x 50mm
Weight: 16.94 lbs
Glass type: Low lead, 92% transmission
Frame type: Universal, dark bronze anodized
|
|
Kyocera solar modules are a reliable, virtually maintenance-free power supply designed to convert sunlight into electricity at the highest possible efficiency. The systems using KC moduels are ideal for charging storage batteries to power remote homes, recreational vehicles, boats, telecommunications systems and other consumer and commercial applications.
Kyocera's advanced cell-processing technology and automated production facilities produce highly efficient multi-crystal photovoltaic modules. To protect the cells from the most severe environmental conditions, they are encapsulated between a tempered glass cover and an EVA pottant with a PVF back sheet. The entire laminate is installed in an anodized aluminum frame for structural strength and ease of installation.
|
|
|
|
|
|
The photovoltaic module SOLARDAY PX60 is composed of 60 solar cells in multicrystalline silicon, 156mm x 156 mm size, connected in series.
The Array of solar cells is encapsulated between two sheets of EVA (Ethylen Vinil Acetate), inserted, themselves, between a front tempered glass of the thickness of 4mm, and one rear sheet in PVF/PE/PVF, a particular multilayer film with excellent electrical, chemical and mechanical properties, which assures both the protection of the rear part from accidental hits and the perfect adhesion with EVA.
The used glass offers the necessary protection from the atmospheric agents and, thanks to a particular textured surface, optimizes the collection of the solar light on the cells.
The vacuum-sealed pressing, at 150°C, assures the perfect airtight sealing of the module, protecting the high performances of the product over the years.
The frame is realized with an anodized aluminium profile that allows an easy assembling of the module on the support structures.
On the back there is a junction box with protection degree IP65, with bypass diodes, cables and polarized connectors.
This junction box gives the best protection warranties both to the electrical connections and to the module for "hot-spot"
damages.
|
|
Description
The Military Solar Power Shade field shelter provides 1 Kilowatt of solar power to recharge a bank of batteries, and also provides shade from the sun to reduce solar heat load up to 80-90%. Fits over MGPTS, TEMPER, and ISO Storage.
Developed with Eureka Tents of Johnson Outdoors and FTL Design Engineering Studios.
|
|
Description
The Military Solar Temper Fly field shelter provides 750 Watts of solar power to recharge a bank of batteries, and also provides shade from the sun to reduce solar heat load and protection from rain. Same size and material as standard Temper Fly field shelters.
Developed with Eureka Tents of Johnson Outdoors and FTL Design Engineering Studios
|
|
Description
The Military Solar Quadrant field shelter provides 190 Watts of solar power to recharge a bank of batteries, and also provides shade from the sun to reduce solar heat load and protection from rain. Fits over standard Temper Fly field shelters, drapes over other structures or vehicles, or stretches out on the ground.
Developed with Eureka Tents of Johnson Outdoors and FTL Design Engineering Studios.
|
|
|
PowerFilm is integrated with standing seam metal roofing and is conformable to a variety of architectural styles. The low profile and flexibility of PowerFilm enables it to be incorporated with innovative straight or curved architectural structures. PowerFilm not only provides power but also enhances the overall building design.
|
|
Kyocera designs and builds solar electric power systems that have everything you need to generate your own electricity. Our utility interactive systems are installed on the roofs of thousands of grid-connected buildings. These rooftop systems not only produce electricity for households, but also allow surplus energy to be sold back to the utility.
The MyGen™ Grid-tie Photovoltaic (PV) Power System consists of photovoltaic modules, a direct current to alternating current (DC-to-AC) power conversion device, DC wiring and protection, AC wiring and protection, lightning protection, component mounting and mechanical support.
The MyGen™ system is designed for use on residential and small commercial buildings of typical construction. Photovoltaic mounting is rafter-secured for structural compliance with most local building codes.
|
|
The typology film used to encapsulate the cells and to link the two sheets of glass determines the two typologies previously indicated.
PVB is used in type A flattened while EVA is used in type B.
PH60-HT-High Transparency Glass/Glass Module is realized by SOLARDAY to reply to the increasing request of architectural needs.
SOLARDAY, for the particular application of glass/glass modules, realizes customized modules according to technical specifications supplied by the customer: dimensions, glass thickness, transparency coefficient and used structure.
High quality and performances of "custom" modules are achieved thanks to the cooperation between SOLARDAY and customers.
Module dimensions can vary from minimum 1000 x 1000 mm. to maximum 1500 x 3000 mm.
|
|
|
SOLARTECNET PV systems are intended for installations at family houses. Produced energy is consumed in the house and the utility buys it back according to Act No.180/2005 at prices declared by the Energy Regulation Authority. The Act guarantees the purchase in 15 years from the time when the system was put into operation.
|
|
FEATURES:
- Thirty-six Multicrystalline / Monocrystalline solar cells connected in series with redundant
- Interconnects. 150 watts module contains seventy-two cells .
- Laminate enclosed in a non-corroding aluminum edge frame anodized to 18 microns.
- Electrical output of module shall be terminated in a weather-proof junction box
- Superstrate construction with toughened glass top surface to withstand winds up to 250Kms/hour.
- Protection against moisture ingress for the solar cells by lamination.
- Provision for mounting of modules on a mechanical structure shall be provided on specific demand.
ELECTRICAL & MECHANICAL FEATURES:
Electrical output of Maharishi solar modules is classified on the basis of the electrical output produced by the solar modules under light intensity conditions of 1000 W / m , AM1.5 spectral irradiance and at 25 C.
The electrical characteristics are typical and subject to production variance, however peak power is the minimum value.
|
|
Solar Wind was one of the first World Solar companies that started manufacturing of high-efficiency bifacial sensitive Solar Modules.
Presently our company is manufacturing variety of fully assembled Solar Modules in the wide power range from 3 W to 110 W, both one-side and bifacial versions. The company is also producing non-standard, partly assembled or metal mounted Modules by a custom request. All Solar Modules are transparent to IR spectrum.
|
|
| ... products without technical information |
| |
The Elliott Digital Governor (EDG) is a compact, cost efficient, packaged electronic speed control unit for precise, reliable speed control of mechanical drives or induction generators. The EDG has simple push-button control to provide improved reliability and speed control over hydraulic governors without the use of wearing parts such as linkages and bearings. Additionally, it does not require a separate programmer as required by many other speed control methods.
The EDG has numerous standard design features including a large, continiuous LCD display and a wide, continuously adjustable governing range from 200-10,000 Hz. Idle speed, ramp rate and turbine speed are programmable, while electrical trip speed is pre-programmed. Optional features include remote trip and start/stop capabilities. The unit is sized for 19-inch rack mounting and can be configured for NEMA A or NEMA D operation. The standard enclosure is NEMA 4X and is suitable for wall mounting.
|
|
DST2600 is a compact and affordable gen-set controller system for power up to 40kVA.
DST2600 makes available all the functions of a traditional gen-set stand-by panel: full AMF controller with engine and generator protections, contactors for power transfer, battery charge maintainer, power relays for engine commands, measurement systems and display for electrical and other physical quantities.
|
|
|
Tide Powercon electronic intelligence power controller has inlaid high performance computer chips and various functions, such as measurement, control, protection and remote control all in one, and the controlling program and protective parameters can be changed, completely satisfying requirements of users and professional assembly factories on automatic control of different generator sets.
|
|
|
|
|
|
TEM10 are mounted on canopies. They allow the Manual and Automatic operation and the removal of power through alternator by socket protected by switches.
The degree of protection is IP55 in the command part, while it is IP44
in the socket place (IP 55 is an optional and it can be requested with special sockets).
These panels are suitable for being used daily in a generator in safety. Actually, they are characterized by sturdiness, components reliability and a lot of care during assemblying phase. A 10 poles connector (which is placed on the front part of the sockets panel) ,allows to connect to a Mains/generator transfer switch panel (i.e. ATS-E) managed by the Control Panel.
These panels are equipped with all it is necessary for their installation: bolts, power cable to connect to alternator (up to 125Amp), metal plug to be inserted into the panel to connect the engine cables.
They use an electronic device which is named TE806. It is simple and reliable. It is also homologated for being used in the most severe environments with maximum security. All controls related to mains and generators electrical measures and all engine controls are shown on a 4 led digits display. It is an easy and powerful device with a lot of available functions.
|
|
Generator Paralleling Controller – GPC-2
Compact all-in-one control unit designed for applications programmed in a PLC. The GPC-2 contains all necessary functions for protection and control of a synchronous/asynchronous generator along with all necessary galvanically separated 3-phase measuring circuits.
The GPC-2 is intended for land-based applications. It is designed for the following applications (can be combined):
> Stand-alone
> Parallel with other generators
> Parallel with the mains
The GPC-2 can synchronise the generator and after synchronisation carry out all necessary generator control and protective functions. It is well-suited for PLC-controlled systems and the interfacing can be done via binary and analogue I/Os or via (optional) serial communication.
|
|
Generator Paralleling Controller – GPC-2
Compact all-in-one control unit designed for applications programmed in a PLC. The GPC-2 contains all necessary functions for protection and control of a synchronous/asynchronous generator along with all necessary galvanically separated 3-phase measuring circuits.
The GPC-2 is intended for land-based applications. It is designed for the following applications (can be combined):
> Stand-alone
> Parallel with other generators
> Parallel with the mains
The GPC-2 can synchronise the generator and after synchronisation carry out all necessary generator control and protective functions. It is well-suited for PLC-controlled systems and the interfacing can be done via binary and analogue I/Os or via (optional) serial communication.
|
|
DST4601/PX is the evolution of SICES renowned DST4601 AMF controller.
Aimed particularly to parallel application, thanks to its high degree of configuration, it can easily be used in quite all standard and special gen-set applications.
Born to manage the last generation of electronic engine, it supports CAN interface toward quite all most popular engines: J1939 protocol for VOLVO, SCANIA, DEUTZ, PERKINS, CAT, IVECO and MTU protocols for MTU engines.
A large graphic display, with a resolution of 240x128 pixels, allowed to implement a simple to use operator interface that is able, at the same time, to report an huge number of electrical and engine measures and information. Engine troubleshooting now can be made by textual interface (for example all MTU diagnostic codes are translated in plain English text).
|
|
|
It is an easy, sturdy and practical manual panel for generating sets control. It is easy for inspection. It is made in a metal box. It is provided with anti vibrating camping pads. It can be directly connected to the alternator.
|
|
| ... products without technical information |
| |
Control, display and regulation devices are assembled in a clear layout in 8146 series control stations. The number of units fitted depends on the control station size and the space required to fit each device. It is not possible to standardize this.
Explosion protection to CENELEC, IEC
Can be used in Zone 1 and Zone 2, Zone 21 and Zone 22
Enclosure in glass fibre reinforced polyester resin, in galvanized sheet steel or stainless steel
Different enclosure sizes
Different enclosure heights
Can be combined to larger units
Equipped with built-in units for snap-in fitting (control units, indicating lamps, illuminated buttons, control switches, ammeters, voltmeters
Different options (Flanges, Cover hinges, Flanges enclosure, Brass plates for metal cable entries)
|
|
|
|
see the results for the following category : 
