|
|
|
Integrated into the business segment ersol Modules, the subsidiary aimex-solar GmbH supplies photovoltaic modules based on high-efficiency mono- and multicrystalline silicon solar cells in the sizes 125 mm x 125 mm, 150 mm x 150 mm and 156 mm x 156 mm. These modules offer high efficiency and excellent value for money. There are two PV module product ranges, each differing in the number and quality of the cells used. aimex-solar also supplies PV modules and solar cells from well-known German and international manufacturers.
|
|
|
Integrated into the business segment ersol Modules, the subsidiary aimex-solar GmbH supplies photovoltaic modules based on high-efficiency mono- and multicrystalline silicon solar cells in the sizes 125 mm x 125 mm, 150 mm x 150 mm and 156 mm x 156 mm. These modules offer high efficiency and excellent value for money. There are two PV module product ranges, each differing in the number and quality of the cells used. aimex-solar also supplies PV modules and solar cells from well-known German and international manufacturers.
|
|
The newly developed d.Blue manufacturing process creates a microscopic texture on the cell’s multi-crystalline silicon surface, reducing reflectance and maximizing the amount of sunlight the cell can absorb. The change is evident in the d.Blue module’s increased power output and “deep blue” color, which inspired its name.
Kyocera’s KC167G d.Blue module produces 167 watts of maximum power (7.2 amps and 23.2 volts under standard test conditions) in a form factor measuring 50.8” x 39” x 1.4” -- the same size as the company’s conventional 158-watt panel, the KC158G. The new KC125G d.Blue module produces 125 watts of maximum power (7.2 amps and 17.4 volts under standard test conditions) in a form factor measuring 56” x 25.7” x 2.0” – the same size as the conventional 120-watt module, the KC120-1. Both d.Blue modules feature “quick connect” output cables, and a heavy-duty box-style dark anodized aluminum frame. The d.Blue modules are covered by Kyocera’s 25-year power output warranty, are UL listed, and are approved by the California Energy Commission for its rebate program.
|
|
Free Energy Europe manufactures, sells and distributes high quality thin film silicon panels of 5, 7, 14 and 19 Watt, which are all suitable for charging 12 volt batteries. Free Energy Europe panels can power a variety of domestic applications, including lighting, 12V battery charging, phone charging, radio, and TV.
Models:
5 W ; 7 W ; 14 W ; 19 W
|
|
Product features:
- Cell development at our own plant for optimised production processes and maximum innovation.
- 4 mm highly transparent solar glass and 50 mm aluminium frame profile for excellent stability and long life.
- Integrated mono and multicrystalline Sunways solar cells with highest efficiencies.
- Made in Germany.
- 25-years output guarantee.
- Connection with prefabricated Tyco connectors.
- Narrow output tolerance.
|
|
Product features:
- Cell development at our own plant for optimised production processes and maximum innovation.
- 4 mm highly transparent solar glass and 50 mm aluminium frame profile for excellent stability and long life.
- Integrated mono and multicrystalline Sunways solar cells with highest efficiencies.
- Made in Germany.
- 25-years output guarantee.
- Connection with prefabricated Tyco connectors.
- Narrow output tolerance.
|
|
Free Energy Europe manufactures, sells and distributes high quality thin film silicon panels of 5, 7, 14 and 19 Watt, which are all suitable for charging 12 volt batteries. Free Energy Europe panels can power a variety of domestic applications, including lighting, 12V battery charging, phone charging, radio, and TV.
Models:
5 W ; 7 W ; 14 W ; 19 W
|
|
| ... products without technical information |
| |
|
Agilent Technologies has provided data acquisition solutions for more than twenty-five years. Today we provide solutions for electrical, physical, mechanical, and acoustic applications. Our data acquisition solutions are based on industry standard software and modular hardware that can meet your current and future needs.
|
|
Measurement Computing today announced the release of three new 1-MHz, 16-bit multifunction USB data acquisition devices, and a cost-saving expansion module for high channel count applications. The USB-1616HS, the USB-1616HS-2, and the USB-1616HS-4 deliver outstanding performance with synchronous analog, digital, and frequency I/O in one compact package. The AI-EXP48 plug-in expansion module coupled with any of the USB-1616HS series modules can quadruple the analog input channel count.
The USB-1616HS series modules have a unique, low-latency control output mode, whereby any input—analog, digital, or counter, can control an output—digital, analog, or timer, based on pre-defined limits, including hysteresis. The outputs are controlled directly from the USB-1616HS series module, and do not require PC intervention. This results in response times that are measured in microseconds instead of milliseconds
The USB-1616HS series offers extensive trigger options, ranging from analog trigger with 1 µs max latency, to multichannel triggering, where any combination of analog, digital, and counter input channels can be combined to initiate the trigger. Other trigger modes include digital pattern, level, edge, inside/outside window, and pre- and post-trigger.
|
|
Analog I/O
12-bit or less resolution
14 and 16 bit resolution
Temperature
Analog Output
High-drive Voltage
Voltage/Current
Voltage
Digital I/O
High Voltage
Parallel
Counter-Timer
|
|
|
The E-PDISO16 has one built-in 10/100 BASE-T auto-negotiation, high-speed communication port. With the Ethernet interface, you can remotely access and configure your E-PDISO16 from anywhere on the network. Only one computer can control the E-PDISO16 at one time. The networking protocol is TCP/IP. You can send your data over 100 meters at data speeds of up to 100 Mbps using only one Ethernet cable connected to your computer.
|
|
Personal Daq/3000 Series
1-MHz, 16-Bit USB Multifunction Modules
– Models /3000, /3001, /3005
The new USB 2.0 Personal Daq/3000 series offers high speed, multifunction data acquisition in a low-cost, portable package. The module offers synchronous and concurrent voltage input, temperature input, waveform output, counter input, quadrature encoder input, timer output, and digital I/O.
Key Highlights
• 1-MHz, 16-bit multifunction USB modules
• Synchronous analog input, analog output,
digital I/O, and counter/timer I/O
• 8 differential or 16 single-ended analog inputs (software selectable per channel)
• Thermocouple inputs on any of the 8 differential inputs
• User-expandable up to 64SE/32DE analog inputs including thermocouple measurements
• Up to four 16-bit, 1-MHz analog outputs
• 24 high-speed digital I/O lines
• Four 32-bit counter input channels with quadrature encoder capability
• Low-latency control output capability
(as low as 2 µs latency)
|
|
|
Data Acquisition is a completely redesigned data acquisition system combining GE's hardware capability with the new Sxp software platform. The new system consists of the 408 Dynamic Signal Processing instrument (DSPi) and ADRE® Sxp software. Highly portable, ADRE® Sxp is designed to meet the changing needs of various fleet asset management programs as well as all other industries where speed and flexibility in data collection are a must. ADRE® Sxp can operate stand-alone in test stands, and with its remote viewing and operating capabilities, offers users large potential savings on unnecessary travel expenses.
|
|
Unique Data Management Solution: 5000B Data Acquisition Unit
Secure, compact data recorder
Back of panel or wall mounting
Ideal for 21 CFR Part 11 applications
Remote data viewing and instrument configuration
The 5000B is a versatile solution for many data acquisition requirements. It is designed for maximum security of data and for flexibility. From simple data monitoring requirements to batch and validated processes, its security, communications and powerful visualization tools make it more than just a recording device. The compact unit can be wall or panel mounted and provide data in varying format to suit different department needs.
Secure data control
As data is sampled and logged in the 5000B, historical files are created in the 16Mbyte of internal Flash memory. The instrument can be configured to automatically pass these files over the network to a server for longer term archiving. In case of problems with the main server a secondary, back-up server can also be specified. The files are in a secure format to protect them from tampering. Review software is
supplied with the 5000B for reading of these files at a later date, and can be configured to automatically pull files from the 5000B and store them in its database.
|
|
Accurate conversion of physical parameters, such as temperature, pressure, and strain, into digital data is a challenging task.
VXI Technology combines superior accuracy, high-density, and modularity specifically targeting these applications.
Essential features such as integrated signal conditioning, internal self-calibration, open signal path detection, and flexible open standard programming interfaces are standard.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
