|
|
The Spirflame® is a patented, powerful microflame generator with an adjustable, electronically stabilized concentrated flame heat output.
The SPIRFLAME® Microflame Generator is used for precision...
soft soldering
silver soldering
brazing
welding
annealing
hardening
spot heating
polishing
flaming of plastic surfaces before print
jewelry applications
and numbers of more astonishing applications
|
|
- Minimum diameter of the spires: 4 mm Maximum diameter: adaptable according to the application
- Generator power: up to 4.5 KVA
- Precision of the wire in-feed ± 2.5%
- Diameter of the soldering wire from 0.46 - 1.6mm
- Wire alloy leaded with or lead free
|
|
- Iron head power: 150W
- Soldering tip long life-span
- Working temperature adjustable to 450°C
- Precision of the wire in-feed ± 2.5%
- Diameter of the soldering wire from 0.46 - 1.6mm
- Wire alloy leaded or lead free
|
|
- Diodes laser
- Laser power: 60, 90 or 120W
- Surface of the focal point 1 x 1.2mm
- Precision of the wire in-feed ± 2,5%
- Diameter of the soldering wire from 0.46 - 1.6mm
- Wire alloy leaded or lead free
|
|
- Pivoting flame allowing immediate release, thus preventing the part from overheating
- Constant and reproducible energy flow
- Precision of the wire in-feed: ± 2.5%
- Diameter of the soldering wire from 0.46 - 1.6mm
- Wire alloy leaded or lead free
|
|
Laser Brazing Head YB50
Modular processing head for laser beam brazing
rugged components tested under industrial conditions
integrated protective window monitoring and Cross Jet
integrated sensor for process monitoring
can be expanded with an LPF Seam Tracking System
Laser Welding Head YW50
Process monitoring: laser power
Laser: Nd:YAG, ytterbium
Focal length collimator: 50 to 200 mm
Welding power supply, wire feed supply, torch hose pack: company CLOOS Schweißtechnik GmbH
|
|
- Diodes laser
- Laser power: 60, 90 or 120W
- Surface of the focal point 1 x 1.2mm
- Precision of the wire in-feed ± 2,5%
- Diameter of the soldering wire from 0.46 - 1.6mm
- Wire alloy leaded or lead free
|
|
Laser Brazing Head YB50
Modular processing head for laser beam brazing
rugged components tested under industrial conditions
integrated protective window monitoring and Cross Jet
integrated sensor for process monitoring
can be expanded with an LPF Seam Tracking System
Laser Welding Head YW50
Process monitoring: laser power
Laser: Nd:YAG, ytterbium
Focal length collimator: 50 to 200 mm
Welding power supply, wire feed supply, torch hose pack: company CLOOS Schweißtechnik GmbH
|
|
The soldering robotic cell RC500 designed and produced by mta automation ag is controlled by an industrial PC, allowing the automation of selective point-to-point soldering operations. This cell enables micro-soldering tasks to be carried out rapidly with the optimum quality and repeatability.
The 3 or 4 axes can be fully programmed, as are the soldering parameters for each soldered point.
In order to avoid production interruptions during loading or unloading the components to be soldered, a version with a two or four position rotary table is available.
Thanks to its modular concept, this cell can be easily integrated into existing lines or pallet conveyors can be integrated into the cell.
|
|
The soldering table-top robot TR300 designed and produced by mta automation ag is controlled by an industrial PC allowing the automation of selective point-to-point soldering operations. The increasing demands of customers in terms of quality, precision and repeatability lead to increasing levels of automation. However, when production batches are small or products widely dissimilar, the cost of sophisticated equipment can place automation beyond the reach of many would-be users. In order to satisfy this need, mta has developed a table-top robot which combines flexibility with the required high levels of process quality and repeatability, all at reasonable cost.
The 3 or 4 axes can be fully programmed, as are the soldering parameters for each soldered point.
|
|
The soldering robotic cell RC500 designed and produced by mta automation ag is controlled by an industrial PC, allowing the automation of selective point-to-point soldering operations. This cell enables micro-soldering tasks to be carried out rapidly with the optimum quality and repeatability.
The 3 or 4 axes can be fully programmed, as are the soldering parameters for each soldered point.
In order to avoid production interruptions during loading or unloading the components to be soldered, a version with a two or four position rotary table is available.
Thanks to its modular concept, this cell can be easily integrated into existing lines or pallet conveyors can be integrated into the cell.
|
|
|
|
