|
|
Features:
- Many models to choose from
- Manual and automated systems
- Miyachi Unitek Uniflow2 Power Supply
- Manual or pneumatic bonding heads
- Thermo-plane thermodes with Quick Connect Blocks
- Linear slide or rotary motion
- Hot Bar Bonding, Reflow Soldering, and Heat Staking Applications
The Desktop Series are standard table top Hot-Bar Systems using Pulsed Heat Thermode technology for Reflow-Soldering and Heat Seal Bonding.
The DT-250 and DT-260 feature 2 or 3- position manual locking slides, respectively, easy load and unload, 2 handed operation, and sensor-selected parameters.
Miyachi Unitek's Desktop Bonders are also capable of performing heat staking. Heat Staking is an assembly process utilized in many high tech fields; it is also used in the manufacture of a variety of everyday consumer products.
|
|
The Desktop DT-250-PH and DT-260-PH Uni-Slide series are part of a line of (semi-) automatic systems developed for Hot-Bar Soldering. The “PH” stands for the pulsed heat hot-bar (alternative Constant Heat can be delivered). The model “250” has a manually operated 2-position slide, whereas the model “260” has a 3-position slide.
The Desktop Series delivers the same high connection quality as the larger and more sophisticated systems. It offers an ideal price-performance (throughput) ratio. The slide enables easy loading and unloading of the parts directly in front of the operator. If the parts need to be aligned, it can be done in the front position where the operator or camera have sufficient free space and a view that isn't blocked by the bonding head. The manually operated slide locks into place, which is detected by a sensor. The sensor confirms the correct bonding position of the part and after activation of the 2-hand control the bonding process is started.
|
|
|
The Uni-Slide stand-alone product line is a system concept with a linear product movement. The product is safely and accurately loaded, aligned and unloaded in the front position of the slide, and processed in the rear position. The linear slide is manual operated.
|
|
|
|
|
|
The stand-alone Uni-Base systems are the first in a line of (semi-) automatic systems developed for Hot Bar Reflow Soldering, Heat-Sealing and ACF-bonding. The Uni-Base delivers the same high connection quality as the larger and more sophisticated systems.
Setting up the system for different products is easy as 1-2-3, making it suitable for laboratory and high-mix production. Because of the low investment costs, earn-back time is short. Mass production environments will typically run several of these systems besides each other.
Standard available systems are:
- Uni-Base SS-W-100 with SH500 pneumatic bonding head and Uniflow Power Supply
- Uni-Base SS-W-231 with SH500 pneumatic bonding head, Uniflow Power Supply and basic manual slide
- Uni-Base PS-W-101 with PH500 motorized bonding head, Uniflow Power Supply and PLC control
For Reflow Soldering and Heat-Sealing these standard systems are using Pulsed Heat Technology (Uniflow Power Supply). For ACF Bonding a tape feeder and tape cutting module can be added. You can find more information in the PDF-file below.
|
|
|
|
|
|
AUREL AF5-AF8 Forced Convection Reflow Soldering system
Description
The AUREL AF5-AF8 reflow systems are special designed for predrying of pastes in thick film technology.
Applications
• Computer control with user-friendly software, Win 98 operating system, temperature PID control, 1000 program storage.
• Alarms for over temperature, heaters-blowers-thermocouples failure, conveyor stop and muffle open. Week timer. Light tower for status indication.
• Entrance with adjustable barrels, curtains, aspiration chamber.
• 450 mm Stainless Steel mesh belt conveyor or [optional] combination Pin Chain/Mesh Belt conveyor, width 50 to 330 mm adjustable by hand wheel or motor [optional], SMEMA interface.
Standard Features
• Controls for Air/Nitrogen, RS232 port for printer and for external temperature profiler [optional].
• 4+4 or 7+7 zones Top and Botton Heating full convection modules, long life blowers, long life and low consumption heating elements, modular design for easy service and cleaning.
• Cooling zone with Air/Nitrogen blowers, fan ventilators, exhaust aspiration, optional exhaust filtering 99.9% efficiency.
• Easy access to the machine hardware, removable panels, gas and pneumatic cylinders for complete opening of the muffle, UPS for product evacuation [optional], emergency stop buttons, interlock switches for total security, easy installation and moving by adjustable feet and wheels.
|
|
|
This system enables to feed in a fully automatic way strip brazing material between two metallic pieces to be assembled. Method widely used in the joining of copper parts. Self-running device : supplied as a kit, with its own PLC, it can be mounted on every existing spot welding machine. More than a feeder of brazing strip, this system also gives you additional quality controls : control of the brazing presence before welding and control of the melting of the strip.
|
|
| ... products without technical information |
| |
|
The series A2 digital differential pressure gage is a patent pending microprocessor based digital pressure gauge for positive, negative, and differential measurement designed to be a direct replacement for mechanical gauges. The Series A2 differential pressure gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the A2 is also available with 0.5% accuracy. The A2 pressure gauge also has an optional 4-20 mA output for applications requiring an output signal. The A2 features a bright ½" LED display and process arch, which gives the gauge improved readability and precision. The A2 digital differential pressure gauges also feature 5 user selectable engineering units including in. w.c., mm w.c., cm w.c., kPa, and Pa. The Series A2 offers an improved look, and performance compare to mechanical gauges.
|
|
|
|
|
|
The Webster DHM 3 Series Digital Hydraulic Multimeter is an all-in-one unit designed to test the performance of hydraulic pumps, motors, valves and hydrostatic transmissions.
The easy-to-use design allows the operator to just switch on and test, without complex setup or special training.
The DHM measures flow, pressure and temperature. In addition, the DHM holds the peak pressure value as well as calculating hydraulic power and volumetric efficiency using the unique P-Q test button.
The DHM is the ideal tool for pinpointing hydraulic system faults, reducing downtime, and helping in preventative maintenance. The design builds on the very successful Webster DHT range of portable testers with the addition of a large digital display and a built-in pressure transducer.
The turbine flow meter with built-in loading valve is bi-directional and specifically designed to enable the operator to simulate the maximum working pressure safely during normal machine operation.
The loading valve has safety discs built-in to protect the operator and the multimeter in the event of excessive pressure, allowing oil to bypass the loading valve INTERNALLY with no spillage of oil from the hydraulic circuit, eliminating any danger to the operator or environmental hazards.
|
|
MI 150 S/113/1,6
Application:
For all gaseous and low-viscosity liquid media that will not obstruct the pressure system orattack copper alloy parts.
Suitable for industry, heating, water supply,air-conditioning, pneumatics.
|
|
MM 160G/717/1,6
Application:
For difficult gaseous and liquid media which are viscous, aggressive, includes element or pollute. With liquid filled case for applications with high dynamic pressure pulsations or vibrations.
Suitable for chemical industry, petro-chemical industry, mining industry, mechanical engineering, enviromental technology and plant construction .
|
|
KL 160_117N 2008/ 02 E
Application:
For all gaseous and low-viscosity liquid media that will not obstruct the pressure system or attack copper alloy parts.
Suitable for industry, heating, water supply,air-conditioning, pneumatics. Pressure gauge for use and control of pressure facilities.
|
|
KL 100_417 2008/ 01 E
Application:
Suitable for corrosive enviroments and gaseous or liquid media that will not obstruct the pressure system. With liquid filled case for applications with high dynamic pressure pulsations or vibrations.
Suitable for chemical industry, petro-chemical industry, mining industry, mechanical engineering, enviromental technology and plant construction.
|
|
BWG supplies strip processing lines for the steel, stainless steel and aluminum industries.
We cover a strip thickness range from approx. 0.05 mm through 16 mm, strip width up to approx. 2,300 mm and process speeds up to and over 600 m/min. Our strip processing lines are renowned in the industry for their innovative solutions with outstanding process results, their high uptime availability in conjunction with a high level of automation, robustness and maintenance-friendliness.
|
|
LOI Italimpianti offers a broad range of annealing and galvanizing furnaces for steel strip based on in-house know-how and backed up by an extensive portfolio of reference plants.
Whether customers need bell-type furnaces for Hydrogen Batch Annealing (HPH), horizontal continuous galvanizing lines or solutions in special applications as annealing of grain oriented Si-Steel sheet, LOI Italimpianti is a reliable partner with comprehensive expertise in all aspects of steel strip annealing and galvanizing.
|
|
| ... products without technical information |
| |
Induction Forge Heating
Inductoheat offers induction forge heating equipment used for heating a wide range of bar and billet diameters. Built to thrive in aggressive forging environments, the power supply in the InductoForge™ is the latest generation of an industrially proven system. The existing reliable technology is enhanced to provide unique features specifically benefiting the forgin industry.
Innovative Technology For Exceptional Performance
Advances in our forge heating technology includes new InductoForge™ billet heating sytem that uses a standardized modular design, which provides flexibility in power supplies, mechanical fixtures, controls and operation. Available for the InductoForge™ is the IHAZ™ Temperature Profile Modeling computer program. IHAZ™ is designed to set up an advanced temerature control to best suit each application.
|
|
The induction coil is the heart of the bar heater. At Newelco coil design benefits from many years of practical experience gained as world leader in induction heating, together with utilisation of the most up to date materials and technology. This combination enables designers to provide the most efficient use of energy while heating bars to optimum forming temperatures.
Efficiency:
-Bar heaters from Newelco provide:
-High energy efficiency
-Enhanced productivity
-Optimum forming temperature
-Environmental acceptability
-Shorter start up time
|
|
| ... products without technical information |
| |
-Quick access to bar stock, pallets, cassettes
-Crane operating elements guarantee easy and safe operation
-Different shelf dividers ensure flexibility
-Optional individual bar removal and supply to a saw roller conveyor possible
-Usable load up to 3 tons
-No „overhead handling"
|
|
VE.MAG ROLLING WAREHOUSE
The solution for the stocking of long materials and accesories
VEMAG Rolling Automatic Warehouses are a good solution for the stocking of long materials, such as aluminium, PVC or steel sections and they are the perfect containers for fabric rolls, accessories and spare parts.
The VEMAG Rolling Automatic Warehouse can be customised according to customers’ needs. You can run the warehouse by means of our specific software, even from different host positions on the network.
|
|
Typ:Vertical Carousel
Height of vertical carousel: 5700 mm
Width of vertical carousel: 7200 mm
Depth of vertical carousel: 1500 mm
Carriers: 16
Load per carrier: 16000 daN
Carrier load height: 300 mm
Carrier load width: 6150 mm
Carrier load depth: 400 mm
Description: No description is available at this time
|
|
SPECIAL TRANSFER MACHINE FOR THE MACHINING FROM BAR STOCK.
IT CARRIES OUT ALL THE NEEDED MACHINING OPERATIONS, HENCE AVOIDING AN ADDITIONAL MACHINE FOR SECONDARY MACHINING OPERATIONS.
|
|
|
The non rotating bar turning transfer machines are used for complete processing of complex parts which would normally require several processing stages. High productivity, comparable with several multi-mandrel lathes in parallel, tooling speed and processing flexibility and completeness, even on wide ranges of diameters, make them suitable both for limited lots and for larger productions. Bar automatic interlocking, up to a leght of 6 m and cut effort monitoring ensure unmanned processing for several hours. Usually they are configurated for simgle or double bar, with bar advancement/shearing station, processing in several stations of a side of the part and traslation of the part with additional processing on vice or self-centring spindle and turning column in the next stations, to process the opposite side of the part.
|
|
STRONG POINTS
Ease of use: complete setup of units at a touch of the touch screen PC
Quick setup and automatic positioning of units: the high level of automation means it takes much less time to adapt the machine when the product being made is changed
Optimized cutting process: patented AVTC® (constant chip volume removal) system to provide a constant mean volume of chip removal under all operating conditions.
Connection with LAN (Local Area Network) and WAN (Wide Area Network)
Self-diagnostics with built-in graphics
User info, maintenance data and functional diagrams viewable on PC
Option of installing SPC (Statistical Process Control) and messenger (email/SMS) systems in case of machine alarm, as well as remote servicing with web cam.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
