|
|
type 0142
2/2-Way Servo-assisted Solenoid Valve, Plastic Body, for Aggressive Fluids, DN 15-50mm
type 0131
2/2 or 3/2-Way Direct Acting Solenoid Valve for Aggressive Fluids, Plasic Body, DN 10-20mm |
|
| Featuring separating diaphragm to isolate actuator from the fluid. Various materials available (bodies in PA, PP, PTFE; diaphragms in FPM, EPDM). Orifice diameters range from 4 to 11 mm. |
|
Model number MCV-2R-N1/4UF
Dimensions (mm) Dia.26 x H48.7
Type 2way-NC
Orifice Diameter (mm) 2
Port Connection 1/4-28UF
Inlet Pressure (kPa) -27 - 100
Outlet Pressure (kPa) 0 - 50
Ambient Temp. Range 0 - 60
Fluid Temp. Range 0 - 60
Voltage (V) 100AC
Power Consumption (W) 3.5
Operating Duration Continuous Duty
Coil Temperature Increase 50
Insulation Class B
Body Material PPS
Seal Material FPM |
|
1. 4.2mm square: 4.2¡Á4.2¡Á23.1mm*1
An innovative and groundbreaking ultra-small solenoid valve - can be mounted in the smallest of spaces, minimizing the manifold size and shortening the length of flow paths.
*1 Dimensions for FV-2-MFG, not including wire connections
2. Diaphragm valve
Excellent chemical resistance ¨C PEEK and Perfluorelastomer are used for wetted materials (materials can be changed according to your requirements).
3. Internal volume only 1.1¦Ìl*2
Through pursuing miniaturization to the uttermost limits, internal volume is now only 1.1¦Ìl ¨C contributes to reductions in reagent and sample quantities and improvements in analysis accuracy.
*2£ºvalue for FV-2-MFGA(B). FV-2-N1G: 4.3¦Ìl¡¢FV-2-MFG: 1.5¦Ìl |
|
The GAS valve technology business unit is divided into the individual business units pneumatic servovalve technology and microvalve technology.
Fields of application:
GAS valve technology is used whenever it is necessary to control pressure and volumes fast and precisely.
|
|
The proportional pressure relief valve size 06 consists of a mechanical pressure relief valve and a proportional pilot valve. System and consumer printings can be stopped proportionally to the magnet stream. If the pressure resting against port P exceeds the momentary setting (magnet stream), the valve opens and lets the medium after connection T flow. If the pressure drops again, the valve with small hysteresis closes.
In order to make an optimal dissolution possible, numerous rule pressure ranges are available. The valve has a fast, precise and oscillation-stable Ansprech and automatic controller action. It is relatively insensitive in relation to oil pollutions. All function-relevant parts are hardened and polished.
|
|
| The proportional flow control valve of the series EPSR regulates a flow rate steplessly dependant on electrical heading for Rome. The adjusted flow rate remains constant also with changing pressure ratios (e.g. load printing). By the sharp edged training of the current screen changes of viscosity of the oil almost remain without influence on the flow rate regulation. All important parts consist of hardened and polished, partially hone precision steel, from which an extreme abrasion resistance results. |
|
SIRAI® micro solenoid valves constitute a specific response to the growing demand for small size low power control components, created by the constantly increasing integration of electronics and industry. A natural development of general purpose solenoid valves, micro solenoid valves can control a variety of non-aggressive liquid and gaseous fluids.
In addition to maintaining an excellent balance between miniaturisation and reliability, the construction solutions adopted provide the possibility of disassembly for cleaning and maintenance.
Produced in 2/2 or 3/2 normally closed, open or universal service versions plus proportional control and latching versions.
The enormous range of models makes these valves suitable for several applications; the solenoid valves can be produced according to customized drawings and with materials and performances different from the standard models in the catalogue to meet specific or particularly complex requirements.
|
|
The operating principle of these solenoid valve is basically different from the one of the other series. The pinching device is moved by a solenoid operator and cuts off the fluid by pinching or releasing a tubing in soft silicon (or other soft material) . The fluid can flow in either direction with a high rate of flow, without turbulences and without dead spaces.
Thus, pinch solenoid valves can control all the fluids that are compatible with the tubing material, protecting them from all contamination, including temperature changes. These characteristics, plus the fact that the tubings are extremely easy to install and replace, make this solenoid valve suitable for a wide variety of applications particularly the control of physiological, medical and food fluids.
Also for these series 2/2 or 3/2 normally closed or open are available plus miniaturised version and latching models. All models are silenced.
|
|
Together with the licenser DLR, a valve has been developed, as it has never been offered on the valve market before. The RRV® Rapid Reaction Valve.
According to the German Aerospace Centre (DLR) in Cologne the RRV® Rapid Reaction Valve was developed as a control jet for orbiting satellites. It was a highly reliable valve that delivered the smallest amounts of pressurised gas and thereby controlling the satellites movements.
The valve was further advanced during trials in a high-vacuum chamber, where defined gas pulses were released into the chamber.
Today, the RRV® Rapid Reaction Valve is a solenoid ball valve with a special function. The difference between the RRV® Rapid Reaction Valve and other ball valves is that a magnetisable ball moves laterally from the seat of the valve using a magnetic field.
The closing process takes place solely due to the stream of the medium. An additional feature and advantage of the RRV® Rapid Reaction Valve is that the response times are realisable wihin milliseconds.
Furthermore, media of high viscosity such as glues, oils and adhesives can be delivered.
Application areas are e.g.: dosing technology, dosing of adhesives, lubrication technology, deformation technology, automobile industry, filling industry, dye and varnish industry, pharmacy, food industry and biotechnology.
Due to the fact that the valve is very small it is pre-eminently suitable for robotics applications.
|
|
Size 15 and 30 miniature CNOMO solenoid valves
Features:
* Low power consumption 0,5W
* IP65 or IP67 protection
* Multiple electrical connections ( M12, DIN…)
* Possibility for gang mounting on joinable subbases
|
|
Solenoid pinch valves use a current passing through a solenoid to induce a magnetic field, which then supplies force to a magnetic plunger. Pinching functionality is achieved by integrating an actuator and a pinching mechanism into a single unit. The pinching mechanism captures the tubing and provides a fixed pinching surface; the actuator generates forces that act on a sliding plunger to pinch the tubing. A spring typically supplies the force in one direction, while the actuator produces an opposing force.
Common applications for solenoid pinch valves are in the medical, pharmaceutical, and laboratory industries. |
|
*G4 : four-way solenoid slide valve for fast
engine ignition and shutdown, having both an
E.T.R. (Energized To Run) mode and an E.T.S.
(Energized To Stop) mode operation.
During engine shutdown, the suction from the fuel
supply pump is used to withdraw fuel from the
injection pump. |
|
| With the FLUID TEAM block system "LRF" of the nominal sizes NG 6 and 10 can be developed very individual longitudinal linkages. Various modules with continuously (parallel and serial) load pressure reversal ("load Sensing") are available. |
|
Solenoid Valves
Direct and pilot operated. DIRECT have the solenoid armature directly connected to the valve spool or poppet. PILOT use small integral direct solenoid valves to switch pilot air pressure to operate the main valve element.
Pilot Valves
Valves operated from a pilot air signal. Can be Pilot/Spring (pilot operated with spring return) Pilot/Pilot (pilot operated with pilot return) or Priority pilot/Pilot (pilot differential area).
Manual-Mechanical Valves
Valves with manual operators include a comprehensive range of neat compact push button, switch, rotary, and key operated units for panel mounting. |
|
In-line Manual-Mechanical Valves
Ported valves with 3/2, 4/2, 4/3, 5/2 and 5/3 functions for mounting directly in line between the source air supply and applied device. |
|
ORK T-B Series solenoid valves: Steam Series valves.
It is suitable for steam and hot water.Seal is PTFE,
Seal of direct action steam solenoid valve is Viton;
position of steam valves,normally closed and normally open.
TORK steam solenoid valves series:
T-BT Series steam solenoid valve are economic price,tube is brass,body is bras,internal parts are stainless steel.T-BT Series are direct acting types.
conection size of valves are between 1/8"....1/2".
T-B Series steam solenoid valves, tube and internal parts are stainless steel,body brass,seals are teflon PTFE .Coil H class, 180 oC degree, 100% ED coil.and two types;
Direct acting,pilot operated types. pilot operated steam solenoid valves works 0,5 bar...6 bar(160C degree ), Direct operated steam valves works 0..upto 6 bar.Connection sizes; 1/8" upto2 " screwed connection.
T-BR Serisi Steam solenoid valve,direct operated,and have flow regulation unit. 1/8" upto 1/4" sizes is available.
T-BZ Serisi zero pressure ,steam solenoid valve pilot operated,diaphragm type, connection size:3/8"...upto 1".
T-BL Serisi Steam solenoid valve,large orifice types,connection sizes: 3/8"....2" .
working pressure ; 0,3 bar...4 bar ,6 bar,steam,
T-BH Serisi,Steam solenoid valve,high temperature, 180 C degree. 3/8"....upto 1/2"
connection sizes.and direct acting types.has got cooling unit.
T-BHD Serisi, Steam solenoid valve 180 C degree. 3/8"....upto 1"
connection sizes.and pilot operated types.has got cooling unit.
on request body of steam valves can be covered nickel
Certificates:TSEK,TSE,CE,ISO9001:2000 TUV,GOST |
|
|
|
