|
|
Medium: water, air, neutral fluids
Ambient temperature: -10 to +50 [°C]
Voltage: 230 [V], 50 [Hz]; 24 [V] DC
Coil power: 8,5 [VA]; 6 [W]
Protection enclosure: IP 65
Duty rating: 100 [%]
Mounting position: optional
Materials
· seal - NBR
· body - brass
· internal parts - stainless steel
|
|
Media: air – water – gas – light oil - vacuum
Pressure range : 0 to 15 bar max
Media temperature : 100° C max
Ambient temperature : -10° to +50° C max
Media viscosity : 40 centistokes max
Mounting : any position
Weight (including coil) : 280 g
Opening or closing time : 20 milliseconds maximum
|
|
The operation will open the orifice of a normaly closed valve or close the orifice of a normally open valve, when the solenoid is energised. On release a spring returns the valve to its original position. It will operate at pressures from 0 up to its maximum delta.
- No energised port P closed by spring return (NC).
- G 1/8", DIN ISO 228
- Flow medium: Neutral, gaseous and liquid media
|
|
3/2 way Solenoid Valve
direct acting solenoid valve DN3, fast acting, for neutral medium like air and water
port connections G1/4, body in brass, NBR seal,
circuit function: power free - outlet balanced, Pressure range 0 - 10.0 bar, Voltage tolerance ±10%,
Ambient temperature max +55°C / 131°F, with flat seal and fixing screw
Standard version
Protecting class IP65, with cable plug for cable-ø7 mm, Medium temperature: 0°C / 32°F up to +80°C / 176°F
|
|
Features :
‧ATEX Ex certified components approved for hazardous locations:
‧Corrosion resistant construction with standard manual override.
‧Direct mounting conforms to Namur VDI / VDE 3845 standard.
‧5/2 and 3/2 function selectable via 180° rotation of single adapter plate.
‧Exhaust feedback - provides spring chamber with instrument air preventing corrosion.
‧Wide operating temperature range -4°F to +122°F [-20°C to +50°C]. Optional Low Temp to -40°F [-40°C]
‧Also available: Intrinsically Safe and CSA/FM Explosion proof.
|
|
- Model/code: E024
- Body Material: Aluminium bronze, Stainless steel
- Inlet Pressure: 100 to 400 bar
- Connections: 1/4" BSPP
- Type: 2/2; 3/2; Energized to Open/Energized to close universal
- Category: Direct Solenoid Valve
|
|
Solenoid valve with BRASS and STAINLESS STEEL 316 body.
2 ways normally closed and normally opened.
Direct, indirect and combined acting
Seals: Buna (NBR), Viton (FKM), EPDM, Ruby, Teflon (PTFE).
Coils: Standard, Bistable, Explosion proof
Port size from 1/8" to 2" and soket.
Fluid temperature up to 180°C.
The ODE solenoid valve range 2ways can be used in a wide quantity of applications whereas fluid compatibility with materials and performance are respected. Fluids can be gaseous or liquids.
The class H coils permit to work up to 180°C and bistable coils allow low energy consumption for portable applications or where temperature increase must be avoid. The explosion proof coils works in potential explosive environments.
|
|
Material according to EN161
Class: A
Group: 2
Media: gas
Pressure range : 0 to 4 bar max
Ambient temperature : -10° to +60° C max
Mounting : any position
Weight (including coil) : 280 g
Opening or closing time : 20 milliseconds maximum
|
|
Medium: water, air, neutral fluids
Ambient temperature: -10 to +50 [°C]
Voltage: 230 [V], 50 [Hz]; 24 [V] DC
Protection enclosure: IP 65
Duty rating: 100 [%]
Mounting position: optional
Materials
· seal - NBR, EPDM
· body - brass
· internal parts - stainless steel, brass
|
|
Media: air - water - gas - light oil
Media temperature : 100° C max (according to seals
material)
Ambient temperature : -10° to +50° C max
Tension : 6-12-24-48Vdc
Opening time : 40 ms
Closing time : 40 ms
Insulation class : F 155°C
Enclosure : IP 65 (with connector)
Electrical connections : 3 fiches DIN 43650 DIN 40050
VDE 0110
|
|
Solenoid Valves :
The range of 'M' series solenoid valves are used in general refrigeration and for original equipment to cut off / activate the refrigerant flow in a refrigerating plant. The solenoid valves can be installed in the liquid line, hot gas line and suction line of a refrigerating unit.
Features :
3 range series that includes:
- MA: direct operated, angle construction.
- MD: direct operated, two-way construction.
- MS: pilot operated, two-way construction.
- Normally closed.
- Hermetic construction.
- Low pressure drop.
- Direct Operated: no minimum pressure differential required to open the valve.
- Pilot Operated: minimum pressure differential of 0.05 bar required to open the valve.
- Soldered and flare connections.
- Coils for AC and DC.
- Suitable refrigerant types: all CFC, HCFC, HFC, (not suitable for ammonia).
|
|
2 WAY ANTIWATER HAMMER VALVES
2 WAY DIRECT ACTING VALVES
2 WAY DIRECT LIFT VALVES
2 WAY HIGH PRESSURE VALVES
2 WAY INTRINSICALLY SAFE
2 WAY PILOT OPERATED VALVES
2 WAY REMOTE PRESSURE OPERATED VALVES
2 WAY STEAM VALVES
|
|
TORK , T-VZ2 Series, 2/2 way Zone Valve, HVAC Application
T-VZ.2 Electric Motorized Zone Valves, HVAC application valves. It works with room thermostad
Sizes: 1/2", 3/4", 1", 11/2"
Body of Ball Valve: brass, PTFE seal
Way: 2 way
Media Temperature: 25 C cold water , 80C hot water
Working Pressure: 220V, AC (on request: 24V AC)
Open-Close Time: 60 sn
|
|
|
The Alcon 2- way Gas & Fuel Oil Solenoid Valves are offered in 3 series of valves. The UGB Series has lightweight aluminum construction and is ideal for low-pressure natural gas. The U28 Series features a compact design that is ideal for air, inert gases, manufactured gas, natural gas, lp gas or light oil. All of these are approved safety shut-off valves. The UACF Series also features a compact design with Viton seal configuration providing approved safety shut-off for fuel oils.
|
|
|
Alcon 2-way General Purpose Large Solenoid Valves are available in the UACD and UACP Series. The UACD valves feature a robust design with a diaphragm operation. These large valves are fully ported for high Cv and offer both standard and optional valve materials for its body and seals. The UACP valves feature a heavy-duty valve design, and piston operation with a wide temperature range capabilities.
|
|
Internal pilot-operated (servo) valves normally have a pilot and bleed orifice, which enables them to use line pressure for operation. When the solenoid is deenergised, the pilot orifice is closed and full line pressure is applied to the top of the piston or diaphragm through the bleed orifice, providing the seating force for tight closure. This operation method requires a certain difference in the pressure across the valve ports.
- Flange-connection
- DN 15 - 50
- No energised port P closed by spring return (NC).
- Flow medium: Neutral, gaseous and liquid media
|
|
A natural evolution of our field proven piloting solenoid valves, these miniature high flow valves set a new standard in reducing space, weight and power consumption. Valve elements are based on the low leakage, high reliability designs used in Lee check and shuttle valves. Our MultiSeal radically simplifies port layout, offers significant space savings, reduced machining costs and higher reliability than traditional sealing methods.
o 2 Position, 2-way, 3000 psi
o Up to 6.0 GPM of flow at 3000 psid (200 Lohms)
o Single Coil or Dual Coil
|
|
|
Alcon 2-way General Purpose Small Solenoid Valves feature a compact design with a wide range of pipe sizes and available orifices. These valves are zero pressure rated. The U21 and U22 Series offer standard and optional valve materials for both the body and seals. Valves are offered with wire or DIN electrical connection. The class H coil insulation is suitable for continuous duty.
|
|
|
|
|
|
2/2 DIAPHRAGM OPERATED, NC / NO SOLENOID VALVE
SPECIFICATION
•Body Material: CF8M casting, Powder Coated Aluminium, Brass
•Type: 2 Port, 2 Position
•Operation: Diaphragm Operated Valve
•Orifice: 12, 20, 25, 40, 50 mm
•Operationg Pressure Range:
•Pilot Operated: 0.5 - 10 bar and 1 - 20 bar Direct Acting: 0 - 10 bar
•Temperature of Fluid: -40 oC to 80 oC
•Operating Voltage:
•AC: 24, 110, 220, 240 (50 Hz/ 60 Hz) DC: 6, 12, 24, 48, 72, 110, 220
•Power Consumption: Size 1 coil: 6W, Size 2 coil: 11W
•Application : Drain, Deluge Valve Operation, Dispensing
FEATURES:
•Highly reliable rugged construction
•Clear flow paths give highest Kv / Cv rating
•Non chocking construction to suit harsh environment
•Pressure assisted positive sealing helps to achieve Zero leak characteristic
•The spring return mechanisms in plunger ensure that the valves are suitable for vibrations up to 9g
•The valves can be mounted in any position
•Short travel results in quick response time and as a result allow rapid cycling upto 100 cycles per minute
• Speed up to 100 cycles/ min. Life >2 million cycles
•No spring design for lowering of the diaphragm making it more reliable.
•Manual over ride can be provided as an option.
•High efficiency solenoid construction requiring low power to operate
•Low temperature rise due to efficient use of energy which allows higher media/environment temperature.
•Low inrush, long life
•Low back surge due to low power consumption
•Solenoid is continuous duty rated
|
|
| ... products without technical information |
| |
|
|
