|
|
Features
Bray controls offers the highest quality Brayline (Spool Type) Solenoid Valve.
The series 60 is far superior in performance when compared to the commonly used poppet type valve.
These units can be used with either spring return or direct acting actuators where on/off electrical operation is required.
|
|
|
In most refrigeration applications, in order to automatically control the flow of fluids in a system, it is necessary to be able to start or stop the flow in the refrigerant circuit. An electrically operated solenoid valve is usually used for this purpose. Its basic function is the same as a manually operated shutoff valve, but it can be positioned in remote locations, and may be conveniently controlled by simple electrical switches. Solenoid valves can be operated by a thermostatic switch (the most common in refrigeration systems), float switches, low pressure switches, high pressure switches or any other device used for making or breaking an electric circuit.
|
|
|
ARO offers a full line of pneumatic valves to meet all your needs. Valves are offered in configurations of 2-, 3-, and 4-Way, available with electric, manual, mechanical, and pneumatic actuators. Miniature to full size valves to fit any application. A line of accessory and specialty valves are also available.
|
|
ORK T-B Series solenoid valves: Steam Series valves.
It is suitable for steam and hot water.Seal is PTFE,
Seal of direct action steam solenoid valve is Viton;
position of steam valves,normally closed and normally open.
TORK steam solenoid valves series:
T-BT Series steam solenoid valve are economic price,tube is brass,body is bras,internal parts are stainless steel.T-BT Series are direct acting types.
conection size of valves are between 1/8"....1/2".
T-B Series steam solenoid valves, tube and internal parts are stainless steel,body brass,seals are teflon PTFE .Coil H class, 180 oC degree, 100% ED coil.and two types;
Direct acting,pilot operated types. pilot operated steam solenoid valves works 0,5 bar...6 bar(160C degree ), Direct operated steam valves works 0..upto 6 bar.Connection sizes; 1/8" upto2 " screwed connection.
T-BR Serisi Steam solenoid valve,direct operated,and have flow regulation unit. 1/8" upto 1/4" sizes is available.
T-BZ Serisi zero pressure ,steam solenoid valve pilot operated,diaphragm type, connection size:3/8"...upto 1".
T-BL Serisi Steam solenoid valve,large orifice types,connection sizes: 3/8"....2" .
working pressure ; 0,3 bar...4 bar ,6 bar,steam,
T-BH Serisi,Steam solenoid valve,high temperature, 180 C degree. 3/8"....upto 1/2"
connection sizes.and direct acting types.has got cooling unit.
T-BHD Serisi, Steam solenoid valve 180 C degree. 3/8"....upto 1"
connection sizes.and pilot operated types.has got cooling unit.
on request body of steam valves can be covered nickel
Certificates:TSEK,TSE,CE,ISO9001:2000 TUV,GOST
|
|
type 0142
2/2-Way Servo-assisted Solenoid Valve, Plastic Body, for Aggressive Fluids, DN 15-50mm
type 0131
2/2 or 3/2-Way Direct Acting Solenoid Valve for Aggressive Fluids, Plasic Body, DN 10-20mm
|
|
|
B/C Valve produces the largest selection of NSF approved solenoid valves for potable water systems. Certified by NSF under standard 61, these valves are proven safe for use in municipal, commercial or residential drinking water, as well as, food preservation or food processing systems. They are available in a Polymer or Stainless Steel body and thread patterns from 1/8" to 1" in NPT or BSP. Also available is a 1/4" and 3/8" version with John Guest Push-In tube connections.
|
|
|
Featuring separating diaphragm to isolate actuator from the fluid. Various materials available (bodies in PA, PP, PTFE; diaphragms in FPM, EPDM). Orifice diameters range from 4 to 11 mm.
|
|
Model number MCV-2R-N1/4UF
Dimensions (mm) Dia.26 x H48.7
Type 2way-NC
Orifice Diameter (mm) 2
Port Connection 1/4-28UF
Inlet Pressure (kPa) -27 - 100
Outlet Pressure (kPa) 0 - 50
Ambient Temp. Range 0 - 60
Fluid Temp. Range 0 - 60
Voltage (V) 100AC
Power Consumption (W) 3.5
Operating Duration Continuous Duty
Coil Temperature Increase 50
Insulation Class B
Body Material PPS
Seal Material FPM
|
|
1. 4.2mm square: 4.2¡Á4.2¡Á23.1mm*1
An innovative and groundbreaking ultra-small solenoid valve - can be mounted in the smallest of spaces, minimizing the manifold size and shortening the length of flow paths.
*1 Dimensions for FV-2-MFG, not including wire connections
2. Diaphragm valve
Excellent chemical resistance ¨C PEEK and Perfluorelastomer are used for wetted materials (materials can be changed according to your requirements).
3. Internal volume only 1.1¦Ìl*2
Through pursuing miniaturization to the uttermost limits, internal volume is now only 1.1¦Ìl ¨C contributes to reductions in reagent and sample quantities and improvements in analysis accuracy.
*2£ºvalue for FV-2-MFGA(B). FV-2-N1G: 4.3¦Ìl¡¢FV-2-MFG: 1.5¦Ìl
|
|
The GAS valve technology business unit is divided into the individual business units pneumatic servovalve technology and microvalve technology.
Fields of application:
GAS valve technology is used whenever it is necessary to control pressure and volumes fast and precisely.
|
|
The proportional pressure relief valve size 06 consists of a mechanical pressure relief valve and a proportional pilot valve. System and consumer printings can be stopped proportionally to the magnet stream. If the pressure resting against port P exceeds the momentary setting (magnet stream), the valve opens and lets the medium after connection T flow. If the pressure drops again, the valve with small hysteresis closes.
In order to make an optimal dissolution possible, numerous rule pressure ranges are available. The valve has a fast, precise and oscillation-stable Ansprech and automatic controller action. It is relatively insensitive in relation to oil pollutions. All function-relevant parts are hardened and polished.
|
|
|
The proportional flow control valve of the series EPSR regulates a flow rate steplessly dependant on electrical heading for Rome. The adjusted flow rate remains constant also with changing pressure ratios (e.g. load printing). By the sharp edged training of the current screen changes of viscosity of the oil almost remain without influence on the flow rate regulation. All important parts consist of hardened and polished, partially hone precision steel, from which an extreme abrasion resistance results.
|
|
|
With the FLUID TEAM block system "LRF" of the nominal sizes NG 6 and 10 can be developed very individual longitudinal linkages. Various modules with continuously (parallel and serial) load pressure reversal ("load Sensing") are available.
|
|
Directional valves direct the flow of fluid, at the desired time, to the point in a fluid power system where it will perform work.
These valves may be classified in several ways:
- type of control
- the number of ports in the valve housing
- the specific function of the valve
D03 & DO5 Directional Control Valve
· Maximum operated pressure up to 4479 PSI
· Allowed back pressure up to 2276 PSI
· Flow rate up to 21 GPM
· Maximum operating frequencies up to 120 CPM
D07 & DO8 Directional Control Valve
· Maximum operated pressure up to 3555 PSI
· Allowed back pressure up to 1991 PSI
· Flow rate up to 80 GPM
· Maximum operating frequencies up to 120 CPM
|
|
| ... products without technical information |
| |
|
|
