|
|
| 2-Way Direct Acting solenoid valves are available with 1/8" - 3/8" NPT or BSP threads and Brass, Stainless Steel or Polymer valve bodies. Our E-Series offers a small compact 5 watt version for the light duty to consumer market while the Industrial Series offers a robust 10 watt solenoid for critical applications and higher pressure ratings. |
|
Medium: water, air, neutral fluids
Ambient temperature: -10 to +50 [°C]
Voltage: 230 [V], 50 [Hz]; 24 [V] DC
Coil power: 8,5 [VA]; 6 [W]
Protection enclosure: IP 65
Duty rating: 100 [%]
Mounting position: optional
Materials
· seal - NBR
· body - brass
· internal parts - stainless steel
|
|
| 2-Way/3-Way Solenoid Valves in sizes from 1/8" to 3" NPT/BSP threads and 1/4" or 3/8" John Guest Push-In Connections in Brass, Stainless Steel or Polymers. Pressure ratings from 0 to 2,200 psi (0-151.7 bar). B/C Valve offers a wide variety of voltages, coil housings and custom options to meet any requirement while keeping costs down. |
|
Solenoid valve with BRASS and STAINLESS STEEL 316 body.
2 ways normally closed and normally opened.
Direct, indirect and combined acting
Seals: Buna (NBR), Viton (FKM), EPDM, Ruby, Teflon (PTFE).
Coils: Standard, Bistable, Explosion proof
Port size from 1/8" to 2" and soket.
Fluid temperature up to 180°C.
The ODE solenoid valve range 2ways can be used in a wide quantity of applications whereas fluid compatibility with materials and performance are respected. Fluids can be gaseous or liquids.
The class H coils permit to work up to 180°C and bistable coils allow low energy consumption for portable applications or where temperature increase must be avoid. The explosion proof coils works in potential explosive environments. |
|
| The Alcon 2- way Gas & Fuel Oil Solenoid Valves are offered in 3 series of valves. The UGB Series has lightweight aluminum construction and is ideal for low-pressure natural gas. The U28 Series features a compact design that is ideal for air, inert gases, manufactured gas, natural gas, lp gas or light oil. All of these are approved safety shut-off valves. The UACF Series also features a compact design with Viton seal configuration providing approved safety shut-off for fuel oils. |
|
| Alcon 3-way General Purpose Solenoid Valves are ideal for mixing, diverting and venting applications. The U31, U32 and U33 Series feature a compact design available in a wide range or orifices. These valves are zero pressure rated and offer a choice of valve materials for its body and seals. |
|
Solenoid valve with BRASS and STAINLESS STEEL 316 body.
3 ways Normally closed and universal.
Seals: Buna (NBR), Viton (FKM), EPDM, Ruby.
Coils: Standard, Bistable, Explosion proof
Port size 1/8", 1/4" and socket.
Fluid temperature up to 180°C.
The 3 ways direct acting range is suitable for actuators control, and in application directly in contact with the process fluid (ais, gas compatible with valve materials, water, steam, liquids compatible with materials). THe class H coils permit to work up to 180°C and bistable coils allow low energy consumption for portable applications or where temperature increase must be avoid. The explosion proof coils works in potential explosive environments. |
|
Technical data
Fluid: water, air, neutral fluids
Ambient temperature: -10 to +50 [°C]
Voltage: 230 [V], 50 [Hz]; 24 [V] DC
Coil power: 8,5 [VA]; 6 [W]
Protection enclosure: IP 65
Duty rating: always
Mounting position: optional
Materials
# seal - NBR
# body - brass |
|
In an ever increasing typology of applications, is by now necessary avoid the oxidation involves any part of plant and instrumentation.
To meet this requirement, SIRAI® has designed a new solenoid valves series, characterized by the high quality of body material, made in PPS.
Besides solving definitely the problem of oxidation, these solutions allow to reduce the limescale.
The choice of an high quality polymer, particularly resistant to chemical and physical aggressions, allows to use these valves for a wide range of fluids, including low-pressure steam. PPS, furthermore, offers a good level of tolerance to ultraviolet rays and flames exposition.
These features, together with other peculiarities of the project, make these valves the best solution for several applications, especially in the field of small sterilizing autoclaves.
Solenoid valves are available in different versions: 2/2NC, 2/2NO, 3/2, 1/8” threaded or barbed ports. Also the electrical part draw up at the same level of high quality standards.
The compact coil, with a perfect balance between power absorption and magnetic performance, is available in “F” or “H” class, also homologated according to the main international standards. |
|
Solenoid valves with BRASS and STAINLESS STEEL AISI 316 BODY.
Protection class EExd IIC T4, ATEX
2/2 normally closed, 2/2 normally opened, 3 ways.
DIrect and indirect actioning.
Seals: Buna (NBR), Viton (FKM).
Port sizes from 1/4" to 2".
Temperature fluid up to 140°C.
ODE is present on the explosion proof market since several years and with a different models with EExd housing for the coil. The 3 ways used as actuators controls and 2 ways directly on the process fluid or air control. |
|
Alcon 2-way High Pressure Solenoid Valves features a compact valve design ideal for high-pressure applications. These valves are piston operated and offer a choice of valve materials for its body and seals. The class H coil insulation is suitable for continuous duty.
|
|
| 2-Way Piloted Piston High Pressure valves in Normally Open or Normally Closed in sizes: 1/4", 3/8" and 1/2". Stainless Steel bodies with Teflon seals offer the longest life for higher pressure applications. |
|
High pressure solenoid valve up to 100 bar
Solenoid valves with BRASS body.
2/2 normally closed
Direct and indirect (piston) actioning.
Seals: teflon (PTFE), NBR, PBT.
Models:
G1/8" Direct acting P/N: 21A2K0C12-XC
G3/8" Indirect acting P/N: 4731
G1/2" Indirect acting P/N: 4966
FLuid: Water, Air
Fluid temperature up to 90°C.
In the last years ODE developed high pressure solenoid valves in Carwash, Misting, High pressure pumps, PET sectors. The range has the peculiarity of a long life internal components and particular resistance to pressure peaks. |
|
| Alcon 2-way General Purpose Large Solenoid Valves are available in the UACD and UACP Series. The UACD valves feature a robust design with a diaphragm operation. These large valves are fully ported for high Cv and offer both standard and optional valve materials for its body and seals. The UACP valves feature a heavy-duty valve design, and piston operation with a wide temperature range capabilities. |
|
Medium: water, air, neutral fluids
Ambient temperature: -10 to +50 [°C]
Voltage: 230 [V], 50 [Hz]; 24 [V] DC
Protection enclosure: IP 65
Duty rating: 100 [%]
Mounting position: optional
Materials
· seal - NBR, EPDM
· body - brass
· internal parts - stainless steel, brass
|
|
Solenoid valve with BRASS body.
2/2 normally closed.
Direct actioning.
Seals: Viton (FKM).
Port size 1/4".
Fluid temperature up to 140°C.
The proportional range is studied to have flow regulation with a good linearity for gas and liquids. |
|
| Alcon 2-way General Purpose Small Solenoid Valves feature a compact design with a wide range of pipe sizes and available orifices. These valves are zero pressure rated. The U21 and U22 Series offer standard and optional valve materials for both the body and seals. Valves are offered with wire or DIN electrical connection. The class H coil insulation is suitable for continuous duty. |
|
SIRAI® micro solenoid valves constitute a specific response to the growing demand for small size low power control components, created by the constantly increasing integration of electronics and industry. A natural development of general purpose solenoid valves, micro solenoid valves can control a variety of non-aggressive liquid and gaseous fluids.
In addition to maintaining an excellent balance between miniaturisation and reliability, the construction solutions adopted provide the possibility of disassembly for cleaning and maintenance.
Produced in 2/2 or 3/2 normally closed, open or universal service versions plus proportional control and latching versions.
The enormous range of models makes these valves suitable for several applications; the solenoid valves can be produced according to customized drawings and with materials and performances different from the standard models in the catalogue to meet specific or particularly complex requirements.
|
|
The operating principle of these solenoid valve is basically different from the one of the other series. The pinching device is moved by a solenoid operator and cuts off the fluid by pinching or releasing a tubing in soft silicon (or other soft material) . The fluid can flow in either direction with a high rate of flow, without turbulences and without dead spaces.
Thus, pinch solenoid valves can control all the fluids that are compatible with the tubing material, protecting them from all contamination, including temperature changes. These characteristics, plus the fact that the tubings are extremely easy to install and replace, make this solenoid valve suitable for a wide variety of applications particularly the control of physiological, medical and food fluids.
Also for these series 2/2 or 3/2 normally closed or open are available plus miniaturised version and latching models. All models are silenced.
|
|
Solenoid valve, plastic and metal
DN 2 – 50; operating pressure 0 – 6 bar; valve bodies in PVC-U and PVDF (operating temperature -20 to 80°C), brass, stainless steel (operating temperature -10 to 90°C´); straight through bodies (2/2-way valve); directly controlled or servo assisted actuators: Particularly suitable for clean liquid and gaseous media as well as inert and corrosive media depending on the version. Solenoid valves are designed for fast cycle duties and are particularly suitable for dosing applications.
|
|
No Pressure Differential Design:
For maximum application flexibility these heavy duty solenoid valves have been designed so that no pressure differential is needed for them to operate reliably. Their unique design eliminates problems such as sticking and "chattering" due to system pressure differentials that can affect ordinary solenoid valves. And their performance is not effected by downstream restrictions caused by nozzles, flow meters or other equipment. This is a real benefit in these types of applications. The valve will operate with up to 40 PSI of backpressure and up to 120 PSI of inlet pressure. There are no minimum pressure requirements.
Normally Closed Operation:
When electric power is applied to the solenoid, the electromagnetic coil is energized, opening the valve. When the coil is de-energized, the valve closes.
Innovative Coil Design:
Unique in design, the valve coil rectifies AC current to DC current, resulting in lower coil operating temperatures than other plastic solenoid valves. This permits the coil to be rated for 100% continuous duty applications. Thus, the valve can be left in the open position indefinitely or it can be cycled continuously with no coil damage.
Unique Seal Cartridge:
Hayward Solenoid Valves feature an easy to replace seal cartridge. No fumbling with small parts and o-rings to replace worn seals. Just install the one-piece cartridge containing the plunger assembly and all of the seals.
Corrosion Resistant Coil:
The powerful coil assembly and electronics are completely encapsulated in a molded polyester housing, resistant to the harsh corrosive environments to which solenoid valves are often exposed.
|
|
IT HEARS it plans, it produces and it commercializes solenoid valves for the world-wide market.
Sin from 1960 our engagement has addressed to satisfy the requirements of our customers, maintaining the most elevated technological standards in the progettuali and productive methodologies. The all with an optimal relationship price - quality.
Our net trades them is composed from inner vendors and external dispensers who guarantee our capillary presence in all the continents.
Certification ISO 9001 modernized in 2003 based on the norms of Vision 2000 and obtained thanks to the abilities to our human resources guarantees the Customers HEARS the reliability of the product and the service.
|
|
The strength and reliability of this range of solenoid valves make them the ideal solution for a wide variety of industrial applications. They are particularly suitable for the control of water, air, inert gases, steam and non-aggressive fluids in general.
The strong compact body and the technical solutions adopted permit reduced overall dimensions, reduced installation times and targeted maintenance.
Produced in 2/2 or 3/2 normally closed, open or universal service versions plus proportional control and latching versions.
The numerous standard models, the special versions already available in the catalogue and the possibility of developing new valves to satisfy specific needs, mean that SIRAI can provide solutions for the most complex applications.
|
|
Solenoid valves in STEEL AISI 316.
2/2 normally sluice, 2/2 normally opened, 3 ways.
Direct and indirect drive.
Sealings in: teflon (PTFE), viton (FKM).
Logons from 1/8 " to 1 ".
Temperature of the fluid till 180°C.
The detail resistor of the constructive materials, joined with our experience in the aimed development uses concurs it of these products in aggressive atmospheres and with corrosive fluid. |
|
Solenoid valve BRASS body.
2 ways normally closed and normally opened.
Indirect actioning
Seals: Viton (FKM).
Coil: Standard.
Port size 3/8" and 1/2".
Fluid temperature up to 140°C.
The ODE solenoid valve range 21PW has been developed for the air compressors sector. This valve is used to exaust the pressure on the compressor "head" or "screw" in order to let the compressor to start without pressure. The particular piston design with resistance to high number of cycles and temperature distinguish this valve from the other products that are normally used for this application. |
|
Alcon 2-way Special Purpose 68 Series Cryogenic Solenoid Valves control Cryogenic Media down to
-321°F. These valves are degreased and individually packaged for Cryogenic service. They also offer a choice of brass or stainless steel body and larger porting for high Cv.
|
|
| B/C Valve produces the largest selection of NSF approved solenoid valves for potable water systems. Certified by NSF under standard 61, these valves are proven safe for use in municipal, commercial or residential drinking water, as well as, food preservation or food processing systems. They are available in a Polymer or Stainless Steel body and thread patterns from 1/8" to 1" in NPT or BSP. Also available is a 1/4" and 3/8" version with John Guest Push-In tube connections. |
|
Deltrol Controls manufactures low-pressure, direct-acting valves specifically designed to control the flow of water and cleaning solution in floor scrubber applications. They provide excellent flow characteristics and sealing ability. They are manufactured with seal and body materials that are proven to withstand the harsh chemicals used in the floor scrubbing process. Deltrol offers a broad standard product line with many valve and configuration options, as well as the ability to customize a valve for unique applications. These are among the many reasons why Deltrol Controls' valves are already used in many floor scrubber machines.
Visit our website or contact us directly to find out more about our solenoid valves for floor scrubbers. |
|
| Alcon Special Purpose Hazardous Environment Solenoid Valves are used for controlling gases or liquids where a potentially explosive gas/air mixture is present for long periods or likely to occur in normal operation. |
|
Alcon 2-way Special Purpose Hot Water Solenoid Valves feature a wide range of available products. With a choice of brass or stainless steel body, these valves are specifically designed for hot water temperature up to +248°F. Valves are offered in NEMA enclosures with wire or DIN electrical connection.
|
|
|
|