|
|
|
|
|
|
Product Details
Orifice: 12, 20,25, 40, 50 mm
Pressure: Up to 40 bar
Material: Aluminum, Brass, CF8M
SPECIFICATION
• Body Material: CF8M casting, Powder Coated Aluminium, Brass
• Type: 2 Port, 2 Position
• Operation: Diaphragm Operated Valve
• Orifice: 12, 20, 25, 40, 50 mm
• Operationg Pressure Range:
• Pilot Operated: 0.5 - 10 bar and 1 - 20 bar Direct Acting: 0 - 10 bar
• Temperature of Fluid: -40 oC to 80 oC
• Operating Voltage:
• AC: 24, 110, 220, 240 (50 Hz/ 60 Hz) DC: 6, 12, 24, 48, 72, 110, 220
• Power Consumption: Size 1 coil: 6W, Size 2 coil: 11W
• Application : Drain, Deluge Valve Operation, Dispensing
•Enclosure:
1. General Purpose Flying lead / Plug-in
2. Weather-Proof: Flying lead & Plug in type, Terminal Box as per IS 13947
3. Explosion-Proof with junction box as per IS 2148 group I, IIA, IIB and IIC
4. Explosion-Proof with Junction box as per ATEX, INMETRO, CE and UL (in process) available.
The 2.5" and 3" solenoid valves are special valves and for more details please contact us.
USE 3/2 NO PILOT TO USE THIS VALVE AS NC.
The External Air Pressure should be minimum 2 bar or >_ main fluid pressure whichever is higher.
|
|
|
|
|
|
solenoid valve for water
•Highly reliable rugged construction
•Clear flow paths give highest Kv / Cv rating
•Non chocking construction to suit harsh environment
•Pressure assisted positive sealing helps to achieve Zero leak characteristic
•The spring return mechanisms in plunger ensure that the valves are suitable for vibrations up to 9g
•The valves can be mounted in any position
•Short travel results in quick response time and as a result allow rapid cycling upto 100 cycles per minute
•Life more than 2 million cycle
•No spring design for lowering of the diaphragm making it more reliable.
•Manual over ride can be provided as an option.
•High efficiency solenoid construction requiring low power to operate
•Low temperature rise due to efficient use of energy which allows higher media/environment temperature.
•Low inrush, long life
•Low back surge due to low power consumption
•Solenoid is continuous duty rated
•Solenoid can be rotated full 360 degrees in most constructions to suit cable orientation
•The solenoid is tropicalized to suit the environment
SPECIFICATION
•Body Material: CF8M casting, Powder Coated Aluminium, Brass
•Type: 2 Port, 2 Position
•Operation: Pilot Operated (Direct acting also available i.e. Zero Differential Valve)
•Orifice: 10,12, 20, 25, 40, 50, 65, 90 mm
•Operationg Pressure Range:
•Pilot Operated: 0.5 - 10 bar and 1 - 20 bar Direct Acting: 0 - 10 bar
•Temperature of Fluid: -40 oC to 80 oC
•Operating Voltage:
•AC: 24, 110, 220, 240 (50 Hz/ 60 Hz) DC: 6, 12, 24, 48, 72, 110, 220
•Power Consumption: Size 1 coil: 6W, Size 2 coil: 11W
|
|
|
|
|
|
ACCESSORIES
FEMALE CORD, BLOCKING CARTRIDGE, DIN RAIL AND STOPPERS, SINTERED BRONZE SILENCERS,
GENERAL SPECIFICATIONS
FUNCTION : 5/2 monostable and bistable. 5/3 , centre off, pressurized, exhaust. 3/2 both NC or NO/NC, or both NO.
FLUIDS : Air or Neutral gases filtered to 50 µ lubricated or not.
OPERATING PRESSURE : 2 to 8 bar for bistable version. 2.5 to 8 bar for monostable version.
-0.95 to 8 bar for external air pressure (min. 3.5 bar). 3.5 to 8 bar for 5/3 version.
TEMPERATURE RANGE : -5 °C to 55 °C.
EXTERNAL PRESSURE : 3.5 bar or minimum as applicable for the valve type.
CONNECTION : 1/8,1/4,1/2 BSP or NPT or Direct pipe fittings.
MANUAL OVERRIDE : Impulse or Slide and Lock.
SOLENOID : AC or DC, 12 V to 220 V, 50 Hz or 60 Hz.
POWER : DC Max. 2 W. for intrinsically safe 0.7 W. AC inrush 4.7 VA, hold on 3.5 VA, 1.9 W.
MATERIAL OF CONSTRUCTION
BODY, COVERS : High grade aluminum EMATAL treated.
SIDE COVER : Pressure die cast aluminum Epoxy Painted.
SPOOL : High grade aluminum Hard Anodized.
SEALS : NBR, PU, PE, SILICON.
OTHER PARTS : High Grade Engineering Plastic.
|
|
|
|
|
|
Product Details
Orifice: 12, 20,25, 40, 50 mm
Pressure: Up to 400 bar
Material: Aluminum, Brass, SS 316
FEATURES:
• Highly reliable rugged construction
• Clear flow paths give highest Kv / Cv rating
• Non chocking construction to suit harsh environment
• Speed up to 400 cycles/ min, Life >10 million cycles
• No spring design for lowering of the diaphragm making it more reliable.
• Manual over ride can be provided as an option.
• High efficiency solenoid construction requiring low power to operate
• Low temperature rise due to efficient use of energy which allows higher media/environment temperature.
• Low inrush, long life
SPECIFICATION
• Body Material: SS 316, Powder Coated Aluminium, Brass
• Type: 2 Port, 2 Position
• Operation: Diaphragm Operated Valve
• Orifice: 12, 20, 25, 40, 50 mm
• Operationg Pressure Range:
• Pilot Operated: 0.5 - 10 bar and 1 - 20 bar Direct Acting: 0 - 10 bar
• Temperature of Fluid: -40 oC to 80 oC
• Operating Voltage:
• AC: 24, 110, 220, 240 (50 Hz/ 60 Hz) DC: 6, 12, 24, 48, 72, 110, 220
• Power Consumption: Size 1 coil: 6W, Size 2 coil: 11W
• Application : Drain, Deluge Valve Operation, Dispensing
• Enclosure:
1. General Purpose Flying lead / Plug-in
2. Weather-Proof: Flying lead & Plug in type, Terminal Box as per IS 13947
3. Explosion-Proof with junction box as per IS 2148 group I, IIA, IIB and IIC
4. Explosion-Proof with Junction box as per ATEX, INMETRO, CE and UL (in process) available.
The 2.5" and 3" solenoid valves are special valves and for more details please contact us.
USE 3/2 NO PILOT TO USE THIS VALVE AS NC.
|
|
Directional valves direct the flow of fluid, at the desired time, to the point in a fluid power system where it will perform work.
These valves may be classified in several ways:
- type of control
- the number of ports in the valve housing
- the specific function of the valve
D03 & DO5 Directional Control Valve
· Maximum operated pressure up to 4479 PSI
· Allowed back pressure up to 2276 PSI
· Flow rate up to 21 GPM
· Maximum operating frequencies up to 120 CPM
D07 & DO8 Directional Control Valve
· Maximum operated pressure up to 3555 PSI
· Allowed back pressure up to 1991 PSI
· Flow rate up to 80 GPM
· Maximum operating frequencies up to 120 CPM
|
|
Basic valves for various manual actuators. The valves have a reliable coupling system for quick installation and removal.
- Flow rates of up to 95 l/min
- Two directly actuated basic valves
- 3/2-way valve
- 5/2-way valve
- Vacuum operation with SV-3-M5
- 7 valve actuator variants
- Pushbutton colours: black yellow and red
- For front panel mounting with standardised installation diameters: 22.5 and 30.5 mm
Pushbutton T
Mushroom pushbutton P
Mushroom pushbutton with detent PR
The actuator is unlatched by turning the detent ring at the mushroom button.
Lockable mushroom pushbutton with detent PRS
After pressing, the button remains locked and can only be unlatched with the key. The key can be removed in either switch position.
|
|
250 SERIES
It is used for general purposes and for the stopping of diesel engines (elevator trucks, power units, refrigerators, irrigation units).
The solenoid valve is available with different kits of accessoires thus enabling the valve to be mounted on rubber or copper tubes of different diametres.
|
|
Features and Benefits
• Pilot operated spool valve technology,
3/2 or 5/2 convertible, by the user.
• High Flow Design: Cv = 1.4, Kv = 1.2
• Integral Push Button Manual Override is standard
• LED power indicator is standard
• Rapid response time up to 5 cycles per second
• Duty Cycle: 100% Continuously Rated for
multimillion cycle life
• Integrated exhaust ports for variable speed control
in 3/2 configuration
• Operating Pressure 37 - 150 psi (2.5 - 10 bar)
NAMUR Interface Valves ideally suited
for direct actuator mounting
The Universal NAMUR Series Valves from Alcon are
perfect for piloting single and double acting actuators
used on process valves such as butterfly and ball valves.
Markets Served
• Offshore
• Petrochemical and Chemical Industries
• Paper/Pulp Recycling
• Food Processing
• Water Treatment Plants
|
|
Compact and lightweight Air Filters, Regulators, and Filter/Regulators.
A diaphragm is used in the regulator to provide good regulating performance. Conforms to non-grease
Note specification.
It is easy to install and use at airline ends.
Fittings are supplied with the product as standard, making it easy to connect into applications.
Standard products can be used as non-ion (NCU) specification products (excluding pressure gauge).
|
|
|
|
|
|
The Liquid Controls E-7 Electronic, Two-Stage, Preset Valve is designed for refined fuel applications including gasoline, gasohol, diesel fuel, and fuel oil. The valve is available as part of a complete, new metering system with electronic registration or as a retrofit when upgrading from mechanical to electronic registration. The E-7 valve may be used with M5, M7, and M10
Class 1 meters.
Features of the E-7 Valve include:
- Indexible design for 90° rotational adjustment of valve outlet.
- Interchangeability (same mounting dimensions) with the V-7 and K-7 mechanical valves.
- Two-stage operation for preset deliveries.
- Fast response for quick valve shut-off.
The E-7 Series electronically-actuated piston valve is mounted on the meter outlet and provides a compact installation. The valve is operated by two solenoids. These solenoids control two-stage closure with a dwell period to eliminate hydraulic shock. The valve solenoids are wired to a Liquid Controls LectroCount Electronic Register and are controlled by the register software. During a delivery, the valve opens to allow full flow through the meter. For preset deliveries, the full flow solenoid de-energizes at the point where dwell flow is activated. This reduces the flow rate through the meter. Once the delivery preset volume is reached, the valve fully closes without hydraulic shock to the system.
|
|
| ... products without technical information |
| |
|
|
