Solid drill bits

Diameter : 3, 4, 5, 6 mm
Length: 60, 75, 85, 90 mm

HSS DRILL BIT + MANDREL FOR WOOD Centring point, 2 lay-out markers. 90° mandrel with 5 cuts.

Alignment system for BMT interfaces for machine series NLX and NZX Repeated accuracy less than 8µm with 200 mm projection High positioning accuracy from one station to another (0,012 mm) with 200 mm projection Completely pre-set driven ...

Diameter : 0.1 mm - 20 mm

... triangular shaped coolant holes have shown to greatly improve coolant flow where it matters most, at the cutting point of the drill. Extensive flow dynamic research revealed not just the benefits of extra volume, but ...

Diameter : 0.01 mm - 0.05 mm
Length: 40 mm

... times longer than its diameter, and is finished with a Mugen micro coating. It also has a special thin film coating for Micro Drill operations on steel materials including stainless steel items. The cutting edge also ...

... wide range of carbide drills for processing diverse materials. With drill diameters in increments of 0.1 mm (up to diameters of 20 mm) and with drill bit lengths of 3xD ...

Diameter : 10 mm - 30 mm

THUNDER T80, the new drill for HARDOX T80 is a drill in solid carbide with double cooling channels and a drill bit specially developed for drilling ...

Diameter : 0 mm - 13 mm

Diamond drills can drill very hard materials, such as tile or ceramic surfaces and glass.

Diameter : 25 mm - 40 mm
Length: 55 mm

A wide range of core drills is available for drilling phase. They are available both sintered with segments for granite and engineered stone and electroplated for marble. All core drills ...

... accuracy boost the drill bit’s breakage resistance and service life. This drill bit is especially designed to drill open spot welds. Best suited for ...

Diameter : 2.1 mm - 48.5 mm

- special diameters for BaerCoil threading tools

Diameter : 11 mm

This pilot drill bit is developed by SML. For its design, it is constructed with a size of 11 mm with a range of 130 up to 100. In addition, the structure of this pilot drill bit ...

Diameter : 3 mm - 20 mm

Superion® burnishing drill geometry used in cast aluminum applications with a straight flute design ideal for use on lathes. The enhanced surface finish on the tool will improve chip flow and reduce built-up edge. Advantages Unique ...

Diameter : 1.3 mm - 10 mm
Length: 57.5 mm

... the centre of the bit to reduce drilling resistance and increase production speed. It lasts longer between sharpenings. • The solid carbide construction guarantees an almost infinite ...

Diameter : 6.8 mm - 12.9 mm
Length: 91, 103, 124, 118 mm

The all-round drill with excellent performance data. Also ideal as a starting point for fine boring. Advantages ery good form and position accuracies Due to special guide chamfers on the drilling ...

Diameter : 5 mm - 82 mm
Length: 14 mm

Vacuum diamond drill bits for drilling porcelain stoneware slabs and tiles. Quality tested by over 1000 installers and tilers. Over 50 holes FORVK1 M14 attack for hoses and grinders

Diameter : 55, 35, 45 mm
Length: 18 mm

... carbide drill bits is 100 holes and ALWAYS depends on the type of tile, its thickness and proper cooling and use. The drilling depth of the tungsten carbide drill ...

Diameter : 2 mm - 6.3 mm
Length: 40 mm - 71 mm

Center drills - Form A - 60° Range of application A: Light alloys C: Stainless Steel E: Titanium F:Cast irons

Diameter : 1 mm - 1.5 mm
Length: 34 mm - 40 mm

... chip build up on the cutting edge, reducing frictional drag, and therefore reducing heat generated. It greatly increases drilling life and ability, especially in ferrous materials such as steel, stainless steels, high ...

Diameter : 3 mm - 16 mm
Length: 60 mm - 82.55 mm

Solid carbide straight fluted drill with 2 PCD cutting edges for CNC automated drilling of CFRP and hard composite materials Technical features Solid carbide body High ...

Diameter : 10, 6 mm

Tungsten Steel Spotting Drill Raw Material： HRC 45 deg tools uses Zigong YG10X, HRC 55 deg uses ZK30UF. Coating: Products in stock are uncoated, various coatings available according to your needs. Workpiece Material： Die ...

Diameter : 4 mm - 60 mm

Special milling cutters and bits made of high speed steel or whole-carbide or with carbide tips, realized according to sample or drawing for every wood working (for ex. Milling, bordering, moulding, boring, and so on).

Diameter : 2.6, 3, 2.7, 2.8, 2.9 mm
Length: 10 mm

DRD DRILL 3XD 03XD Ø 2.6-3.0 nb of cutting edges: - 2 L: - 38 d: - 3 nb of cutting edges: - 2 L: - 38 d: - 3 nb of cutting edges: - 2 L: - 38 d: - 3 nb of cutting edges: - 2 L: - 38 d: - 3 nb ...

Stabilizer Integral spiral stabilizer Integral straight rib stablizer Stabilizer is made from AISI4145H alloy steel acc.to API Spec.7, heat treated by special procedure and obtain expected hardness, strength and impact value ...

Diameter : 4 mm - 26 mm
Length: 110 mm - 950 mm

... powerful hammer drill bit from Heller and has the longest service life for concrete and reinforcement steel rebar applications. On the one hand, the patented Trijet drill head is characterized ...