|
|
Model 4199
Gravity Porta-Valve Gravity Filler
Model 4199 Gravity PortaValve is designed to fill valve type bags with high density free flowing products such as steel shot and similar materials.
How it Works:
The valve bag is installed on the fill spout, and rests in the bag chair mechanism. When the clamshell gate opens, product gravity flows into the bag. When the bag has reached the designated weight, the clamshell gate closes, and the bag can be removed.
Design features:
- Scale-beam gross weigh.
- Gravity feeder.
- Mechanical catch gate release.
- Manual bag clamps.
- Mild steel construction.
Available Features:
- Pneumatic bag clamps.
- Pneumatic bag inflator.
- Stainless steel contact surfaces.
- Special paint finishes.
- Supply and transition hoppers.
- Take-away conveyor.
|
|
VALVE BAGGING SYSTEMS
Whatever your product, filling accuracy or level of automation desired, PREMIER TECH SYSTEMS has the equipment you need for packaging and handling your valve bags. Our product line includes auger, air and impeller packers equipped or not with an automatic bag placer. For extremely light and fine chemical powders we also offer a vacuum packer, which can be fitted with our brand-new bag placing and ultrasonic sealing system
|
|
Efficient and reliable filling of floury, powdery and gritty products, just as starch, flour, baking ingredients, soybean products, proteins, sugar, etc.
For product filling the pneumatic packer utilises air. The proven design of the chamber bottom and top fluidisation air supplies that are separately adjustable depending on the flow behaviour of the product provides an optimum product feed rate with a minimum air supply.
Thanks to the continual air suction during the filling, high filling outputs are guaranteed with a minimum internal bag pressure.
Advantages of the pneumatic packer:
- gentle, clean and low-dust product filling
- minimised product residue in the filling chamber
- easy cleaning in case of product change
- project-specific configuration thanks to the BEHN + BATES modular system
Output of the pneumatic packer:
up to 300 bags per hour per spout
|
|
TURBINE INLINE PACKER
Depending on the properties of the product to be filled, e.g. bulk density, flow properties and particle size distribution, we offer a customised packing system. We have available 2 different turbine filling systems in our product range: the HAVER vertical turbine filling system and the HAVER horizontal turbine filling system.
|
|
|
|
|
|
Impeller Valve Bag Filling
Impeller Valve Bag Fillers, offer the best solution; for packing fine powders of mid range to high bulk density product into valve bags. The supply hopper is equipment with 4-blade impeller powdered by horizontal drive shaft which feed the product to the valve bag with the assistance of low pressured air.
The product is filled according to the gross weighing system, which means that the bag are weighed during filling process. Thanks to electronic weighing system and double speed filling (coarse and fine) feature, this machine ensure constant and high accuracy filling rates. Depends on capacityrequest 2-3 spouts linear type models are available.
Pneumatic Valve Bag Fillers
Pneumatic Valve Bag filter, offer the best solution for packaging powder, fine powders, granular and grinded of low & mid range to high range bulk dencity products to valve bags. The supply hopper cut the product inlet when the level sensor gives a signal to pneumatic controted butterfly valve. The continous products flow from the supply hopper is ensured by the top air feeding system and bottom air fluidization system which provides on optional products feed rate with a minimum air supply.
Auger Valve Bag Fillers
Auger Valve Bag Fillers, offer the best solution; for packaging low density, low fluidity, powder and granular product to valve bags.
When a fill cycle is initiated, the product is conveyed by the auger into the bag. The product is filled according to the gross weighing system, which means that the bags are weighed during the filling process.
|
|
|
|
|
|
VARLIK AAD Type machines are designed for packing of open mouth bags to fill product and then close; and net or gross weighing units are installed on according to your need. Type of product feeding depends on characteristics of product; free flowing, screw type, belt type or vibratory type. Your satisfaction of machine is strictly connected to above decisions according to your needs and requirements.
* Free flowing type feeding for easy flowing, dry and granulated products. For example sugar, salt, sand, seed grain, ?
* Vibratory feeding type for difficult flowing products, coarse granular, abrasive and amorphous shape. For example coal, nail, wire products, rock,?
* Belt feeding type for free flowing or not but dedicated or wet products. For example tea, wet vegetables and fruits, fertilizer,?
* Screw feeding type for difficult flowing products but damage is not important during packing. For example cement, sand, construction chemicals, soil,?
The following points are essential to reach good weighing accuracy of outputs:
* Perfect working of product feeding mechanism.
* Perfect controller with perfect software and program.
* Reliable load cells.
* Technical support by specialists who has good knowledge on product/weighing/packing.
With over 25 years of experience, VARLIK Machine selects reliable solution for your product and best machine combination for your needs. Additionally you are only able to find innovative specific software?s and improved programs just in VARLIK machines.
|
|
Switching and proportional solenoids
Flange connection with robust body made of steel
Submerged solenoids
Potted as a standard
Sizes 29 mm, 35 mm, 45 mm
and 60 mm
Static pressure proof up to 350 bar
DC executions (10...250 VDC)
AC executions (24...250VAC) with integrated
rectification
|
|
|
Solenoid coils work in conjuction with solenoid valves. The coil provides electrical power to the solenoid valve, causing the solenoid valve to open or close depending on the valve model.
|
|
HYDAC Solenoid Technology:
Variety due to customer-orientated design.
coils
poletubes
compact solenoids
LVDT-systems
complete solenoid with strippable tube
|
|
| ... products without technical information |
| |
Every year thousands of workers get killed or injured while performing repairs or maintenance on industrial equipment or machinery. Many of these accidents are caused by the uncontrolled release of energy. In Europe however, several regulations exist, requiring that all energy sources are turned off and ‘locked out’ while machines are being serviced or repaired.
Lockout Tagout is a planned safety procedure which involves turning off the energy supply of industrial machinery and equipment whilst maitenance work or repairs are being carried out. This procedure protects workers from the risks posed by live machinery or electricity.
|
|
Lock for blocking pneumatic circuits
- This rotating lock is designed to block pneumatic circuits in the open or closed position.
- Upon rotating the handle, the valve state/position is changed.
- With the handle in the free position, the valve is blocked open or closed, based on the requirements of the application.
|
|
Lockout Valve with Integrated Filter/Regulator
GENERAL:
The Modular L-O-X® Air Entry is a combination Lockout Valve with Integrated Filter/Regulator in a high flow, compact space saving design. Full flow exhaust meets all the applicable standards.
FEATURES:
- Filter and regulator consolidated into a single space-saving assembly
- Modular mounting for easy servicing
- Internal automatic drain; optional manual drain or float drain (metal bowl only)
- Reverse flow, self-relieving piston-type regulator; non-relieving optional
- Tarn per-resistant pressure setting
- Has a visible indicator of pressure release (verification port)
- Only lockable in the off position
- Has a full size exhaust port (equal to or larger than supply)
- Easy to operate (positive push/pull operation-detented)
- Optional EEZ-ON® operation available
APPLICATIONS:
- Packaging
- Material handling
- Conveyor panels
- All Air Entry points
|
|
| ... products without technical information |
| |
|
Sealing rings of reinforced moulded graphite are solving problems on Bridgeman-type valves widely used in power generation...
|
|
Valves and jointsInfo-Catalogue
Control and regulation of liquid.
Orobica Plast-Gom produces gaskets for butterfly valves, joints according to DIN - ISO - CLAMP - S.M.S. - BS - IDF standards for alimentary, pharmaceutical and chemical industries.
|
|
TRP Polymer Solutions’ product portfolio is diverse. Its polymer technologists have considerable experience developing bespoke engineered precision rubber moulded components for a wide variety of industries.
This section of the website outlines some of TRP Polymer Solutions’ product developments and materials. To discuss your requirements in relation to these or any other area, please get in touch.
|
|
Precision Ground Rollers
Precision ground rollers are vital components in applications including paper transportation, mail sorting and ATM machines.
TRP Polymer Solutions offers expertise and experience in the development of precision ground rollers for a wide range of industries. Its polymer technologists can work with your engineers to develop or refine a roller to your bespoke requirements.
|
|
|
The line of mPm DIN connectors is designed to reduce the number of components making them easier to assemble and with fewer parts to stock. They provide repeatable, unsurpassed IP67 sealing performance using an external nut over the cable. Traditional Form A and B connectors require three different styles for PG07, PG09 and PG11. However the external nut accepts a wider range of cables from 4mm to 9mm, reducing the number of parts from 3 to 1. The new generation of DIN connectors is available in our complete range of field attachable sizes including Form A, B and C.
|
|
|
Mencom Corporation is a worldwide supplier of DIN Solenoid Valve Connectors. Product line includes over molded connectors, field wireable connectors, and quick disconnect connectors in form A, form B, Industry Standard form B, form C, and Industry Standard form C.
|
|
|
Via ESCHA valve connectors pneumatic and hydraulic valves as well as pressure sensors can be triggered. The connectors are available as A, B, I, C versions and with a contact spacing of 9.4 mm and comply with EN 17 5301-803 (replacing DIN 43650).
|
|
SERCO PORTABLE MACHINING UNITS
The SERCO units are positioned and locked by means of a column/arm system clamped on the outer part of the surface to be machined (allowing internal machining). Machine set up is fast and easy. After a first visual positioning, we can get within a few minutes, using a simple specific device, a parallelism and concentricity within a 1/100 of mm precision. A powerful air motor drives the tool rotation (hydraulic motors on request) and radial automatic feed (with a selection of two speeds).
Maintenance
Flanges
Safety valves
Sealing valves
High pressure valves
Portable Equipment
Portable machining equipment
Portable boring and surfacing machines
Portable surfacing machines
Portable grinding machines
Portable lapping machines
For further information please contact :
PROTEM SAS
ZI LES BOSSES
F-26800 ETOILE SUR RHONE
FRANCE
Tel +33 4 75574141
email : n.reicher@protem.fr
|
|
The V-Lap F6 is standard equipped with a range of grinding and centre plates for grinding and lapping any type and size of ‘flat’ seat up to 6” / DN150 mm. The centre plate keeps the grinding plate in position, but also gives an eccentric rotation ensuring constant and complete coverage and absolute flatness.
Abrasives
The V-Lap F6 is completed with a large consumer quantity of polyester based, self-adhesive Aluminum Oxide round foil tips in grains rough, middle and fine. The foil tips can be used dry and on all common seat materials.
Drive machine
The V-Lap F6 is standard equipped with a battery drive machine and is delivered with 2 battery’s. The low weight and good balance of the machine increases the grinding performance and makes it easier to attain high quality flat ‘results’.
The complete set is packed in a robust, but light weight carrying case.
|
|
3 Axis 800 / 2000 / 4000
The machine is equipped with: one control panel, with an auto diagnostic display system, for the rotation and the feed of the arm and the milling cutter.
|
|
A superior range of valve regulated batteries, with an impressive extended service life, high energy density and shelf life. Manufactured in a range of compact configurations using pure lead technology, the SBS range offers design flexibility where space is at a premium.
A dedicated battery room is not required, as SBS can operate in cabinets at the point of use. Advanced plate technology allows SBS batteries to function in the harshest of environments.
Features & Benefits:
- Capacity: 7.0 Ah - 360 Ah
- Design Life: 15 years
- High energy density
- Two year shelf life
- Compact design
- UL94-VO flame retardant case and cover
Applications:
- Boating / Marine
- Cable TV
- Electric Utility/Switchgear
- Telecom
|
|
Since 1985 Accu Oerlikon has been developing and producing, under
ISO 9001/14001 certification, a full range of VRLA cells and monoblocs specifically for applications where a high reliability, long life (up to 15 years) and a solid engineered design are required.
The capacities covered by the actual Compact-Power™ series range are from 12 V 25 Ah (C10) monobloc to a 2 V 3000 Ah (C10) cell. As its name suggests, Compact-Power cells and monoblocs are maintenance free, smaller and lighter than conventional flooded stationary batteries and are capable of delivering very high discharge currents. In addition, a tightly boxed component assembly imparts excellent resistance against shock and vibration. The cells and monoblocs are supplied ready to install, with no acid or water additions whole life long and no expensive special battery rooms.
|
|
| ... products without technical information |
| |
... see all the products in the category
Batteries
|
|
|
see the results for the following category : 
