- Detection - Measurement >
- Flow, Pressure and Level Measurements >
- Solid level switch
Solid level switches
Process temperature: -10 °C - 60 °C
The level controls propeller indicators SEM are employed for level control in tanks that contain powders or granulars. The indicators working is very simple: a synchronous motor that rotates at low speed ...
FIAMA
Process temperature: 0 °C - 60 °C
The Level Switches have the following Features: - 2 to 30 m cable - 1 Change over - 10 A (250 VAC), 4 A (30 VDC) - Temperature range 0°C to +60°C - IP68 (40 m) - Option: without counterweight
Process temperature: -20 °C - 80 °C
Process pressure: 0.5 bar - 1.8 bar
They are used for the level control in containers holding product in powder or granule form in potentially explosive environment in Category 1/2 dusty environments D (zone 20/zone 21). The functioning is based on the ...
Process temperature: -10 °C - 60 °C
Its functioning is due to the pressure created by a product on the rubber membrane which activates a fast acting microswitch. The sensitivity of the switching can be adjusted by means of a screw placed on the lid of the unit, adjustment ...
Process temperature: -40 °C - 150 °C
Process pressure: 16 bar
The vibration level controls are using when it is necessary to ascertain if solid powder or granular substances are at their minimum or maximum depths. They are used for level control ...
... float. When the surface of the loose storage goods in the silo reaches the level of the float, tilting it to an angle of 25°, a switch inside the float operates and causes a high-level ...
Process temperature: -10 °C - 120 °C
Level sensor for solid materials Suitable for dusts and granular Supply voltage 24Vca – 48Vca – 115Vca – 230Vca This level switch, reliable and of robust construction, ...
Rotary paddle level switches are mainly used to regulate the supply and demand of material found in hoppers and bins. The are capable of detecting and regulating the number of materials supplied in a broad range of procedures. ...
TARNOS level switches are used to control the supply and demand of material, in hoppers, bins, etc. They detect and regulate automatically the quantity of product to be supplied in a great variety of processes. TARNOS ...
Process temperature: -40 °C - 399 °C
Process pressure: 0 bar - 2 bar
... rotary paddle bin level indicators consist of the most reliable, rugged and economical point level control sensors available for detection of dry bulk materials. These ...
Monitor Technologies
Process temperature: -40 °C - 130 °C
Process pressure: 0 bar - 40 bar
... Granular material particulate and powder with minimum 0.01 kg/dm³ bulk density - Chemical industry - Food and beverage - Power plants - Paper mill - Plastic industry
NIVELCO Process Control Co.
Process temperature: -30 °C - 150 °C
Process pressure: 25 bar
Control applications in pumping circuits, level detection or presence of solids or liquids in open or closed tanks or pipes, tanks agitation, open channels, distillation columns, degassing, silos. Connections Thread ...
Process temperature: 0 °C - 200 °C
Process pressure: 0 bar - 1 bar
The Membrane Point Level Switch, developed by Kobold, is suitable for bulk goods. The membrane is built wit NBR, Nitrile, FPM, and stainless steel materials and the retaining ring is ...
KOBOLD INSTRUMENTATION
Process temperature: -20 °C - 60 °C
... fiberglass tanks. Description Standard capacitive units with rod or rope extension, for general industrial applications. Suitable for ON-OFF level control of granules, powders and liquids, IP66 ÷ 67 protection.
SGM LEKTRA
Process temperature: -20 °C - 60 °C
On/Off Capacitive control is an established and extensively used level control technique. The instrument is composed of an electrode, suitable for the application, and of an electronic insert mounted inside a protective ...
SGM LEKTRA
Process temperature: -30 °C - 80 °C
Process pressure: -1 bar - 6 bar
... . Description CLS5 is a capacitive level control instrument that uses an advanced technology. CLS5 is equipped with a sensor in PP heatsealed. This allows its use in a wide applications range for the level ...
SGM LEKTRA
Process temperature: -40 °C - 230 °C
Process pressure: -1 bar - 64 bar
... is used to drive and feed back the tuning fork rod, so that the tuning fork rod can produce resonance. When the material level contacts the tunng fork rod, the frequency signal feed back by the turning fork rod will ...
Process temperature: -30 °C - 60 °C
Level switch measurement for min./max. alarm The level switch measuring system LB 471 is used for point level measurements, providing either high ...
Process temperature: -10 °C - 80 °C
Process pressure: 0 bar - 10 bar
... corrosive chemical process. Application: Level switch for liquids solids and granular Operating Voltage: 24 Vdc +/- 10% Consumption: 2 VA Output: Relay (SPDT) 5A max (250Vac) Adjustment: ...
Sitron
Pointek CLS100 is a compact 2-wire inverse frequency shift capacitance switch for level detection in constricted spaces, interfaces, solids, liquids, slurries and foam. Pointek CLS100’s ...
Labkotec Oy
Process temperature: -20 °C - 120 °C
Process pressure: -1 bar - 10 bar
FEEJOY Capacitance Level Switch has a simple structure. Capacitance type level switch uses the principle of resonant circuit. It is suitable for all kinds of material ...
Feejoy Technology
Process temperature: -40 °C - 250 °C
Process pressure: -0.1 MPa - 4 MPa
... in the industrial frequency band range. The beam energy is low, can be installed on all kinds of metal, non-metallic container or pipe, no harm to human body and environment Operation principle Radar level ...
Process temperature: -40 °C - 500 °C
Process pressure: 0.5 bar - 1 bar
... from rotating. The reverse torque turns the motor out of its end position and actuates a switch. The motor is switched off by a second switch. If the filling level drops, the leaf is ...
... Rotalog Paddle Switch is second to none. Thousands are in operation giving this unit a reputation for being reliable, durable and effective. Three main models are available, in a range of voltage and paddle options ...
Level indicators are used for measuring material level in silo and hoppers. Paddle type level indicators are supplied as 24AC, 230VAC, 24VDC. Also optional shafts up to 1000mm length ...
Process temperature: -20 °C - 80 °C
Process pressure: 0.5 bar - 1.8 bar
... economical Solicont SIC-350 is a paddle switch for point level detection in bulk materials. Its robust polymer housing and compact design makes it an ideal sensor for full, empty and ...
ACS Control-System GmbH
Process temperature: -40 °C - 260 °C
Process pressure: -0.1 MPa - 6 MPa
DHE-FT Vibrating Level Switch is a control switch for level measurement developed and produced by DHE. This instrument combines the unique “ELL Signal Analysis Technology” ...
Process temperature: -20 °C - 80 °C
Process pressure: 0 bar - 0.8 bar
ILT-type Bin Level Indicators are designed for electric signalling by rotary action of minimum or maximum material level inside bins, hoppers or silos. As soon as the material level ...
Process temperature: -40 °C - 150 °C
Process pressure: -1 bar - 16 bar
... device is used for level monitoring in all types of bins or silos and for all kinds of powders or granular materials. ILV-type Bin Level Indicators are designed for electric signalling by fork vibration ...
Process temperature: -40 °C - 130 °C
Process pressure: -1 bar - 25 bar
... increases as the medium level increases. Hence, for capacitive measurements a medium with a constant permittivity is required. The simple and robust construction (as rod or rope sensor) allows level measurement ...
Process temperature: 0 °C - 100 °C
E-MSS-110 Series Motorized type level detectors have wide range of applications in detecting the levels of solid materials. They are preferred in many applications as they do not require ...
Process temperature: 0 °C - 100 °C
Process pressure: 2 bar
Capacitive type level detectors have wide range of applications in detecting the level of both liquids and solids. E-KSS-100 series level detectors operate on the ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining