|
|
PRONAL lifting cushions can be used to lift loads of over 70 tonnes and are particularly useful in areas such as civil protection, security and defence.
They are also used in maintenance operations on construction sites and in various industries for moving, blocking and handling operations... Made from elastomer-coated fabrics, the cushions are vacuum vulcanised at a temperature of 140°C, thus ensuring that they are extremely tough.
Advantages :
- easy to install, thin when empty,
- uniform lifting power,
- high degree of control during lifting, progressive lifting process,
- high lifting force.They are also used for maintenance purposes on site and in industries for some operations as moving, stalling, handling...
|
|
|
If an ECO-Jack toe jack can not be operated, the load can be lifted with an ECO-Jack AIR lifting bag ranging from 1.000kgs (2,200lbs) to 42.000kgs (92,800lbs). Fitting into the tightest areas with a collapsed height of 30mm (1.1-1.2inches), all models are light weighted and equipped with serrated lifting surfaces, markes centers, reinforced edges and safety instructions.
|
|
To be able to achieve a maximum lifting movement with only a minimum insertion space available, lifting bags are the appropriate tools to use. With 12 models, Holmatro has a lifting bag for every job. Thanks to their unique low profile edges the lifting bags can easily be inserted under all circumstances.
The deflated height of our lifting bags is 22 or 25 mm. Using compressed air (maximum 8 bar), the largest model, the HLB 67, reaches a maximum inflation height of 520 mm. Another feature of the lifting bags is their ability to adjust to the lifting surface. The applied pressure is divided over a large surface compared to the use of hydraulic jacks.
|
|
The distinguishing feature of Vetter Mini Lifting Bags 8.0 bar/116 psi is the noiseless, jolt-free, and smooth lifting of the heaviest loads. They lift, push, press, prise and split, even on sloping surfaces. The surface profile improves grip on slippery ground such as grass, sand etetc.
They are produced in two versions. Both versions have a multi-layer construction which covers each side of the bag. This is either steelcord or aramide reinforcement.
|
|
INFLATABLE JACK
1-74 Ton
Highly flexible and lightweight jacks only require an air supply of 8 bar maximum. Any non-explosive gas or water can also be used for inflation.
Uninflated jacks are only 25,4 mm thick, making seemingly impossible lifting tasks routine.
Space age reinforced, multi-layer aramid construction, widely overlapping on all sides. Tested at 8 bar.
In rugged testing, jacks withstood tens of thousands of inflate/deflate cycles at 12 bar.
Large surface area and material flexibility allow jacks to lift loads on soft or ompressible surfaces without support cribbing being necessary.
|
|
Lifting devices
Lifting - Freeing - Cleaving
Mustlift is able to lift safely heavy loads on the ground or in water. Their compact size, allowing to place them quite everywhere, is obtained by a simple vulcanization of a high resistant elastomer coated fabric. They can be used on irregular surfaces thanks to their positive grip surface.
Mustlift lifting bags can be inflated with air or water at maximum 8 bar.
High-pressure flat lifting bag, made from coated fabric (polyester or aramid) vulcalized in one operation. Lifts up to 76 T in the standard range. Anti-slide coating
|
|
Big Bag for dangerous waste with UV inhibitors.
Reinforced by polyethylene liner, airtight.
Four lifting straps, 30 cm long, breaking load kg 1500.
Duffle top and plain base without discharge spout.
BIG BAGS UN APPROVED
UN 3/Y approved Big Bag with max. load 1000 kg.
Breaking point 6/1 with identity labelling, approval number "R" on yellow bottom as foreseen by D.l. 52 dated 03.02.1997.
Complete with liner.
|
|
for quick application in close space!
- Multi-layer design with Armid material.
- Fill time with 8 bar within seconds.
- Extensive accessories, like suitable case etc.
|
|
Big Bag with apron on top and sealed base
Big Bag, high tenacity layered Polypropylene with 4 hoisting loops, with apron on top and ssealed base.
Size: 90 x 90 x 110 cm
SWL 1000 kg; SW 5:1.
Big Bag with run-in and run-out channel
Big Bag, high tenacity layered Polypropylene with 4 hoisting loops, with run-in and run-out channel, 35 x 50 cm.
Size 90 x 90 x 110 cm
SWL 1000 kg; SF 5:1
|
|
| ... products without technical information |
| |
Handling attachment with ovalshaped vacuum pad. Indicated for handling of paper, plastic or juta bags.
It is the quickest and economic way to handle bags.
Vacuum generation by electric vane pump.
Max capacity 80 kg.
Accessories: quick disconnection for suction pads, angular adaptor, flexible extended manouvre handle, etc.
|
|
|
|
|
|
Compared to the traditional handling devices such as hoists and pneumatic manipulators, the Intelligent Assist Devices by Scaglia Indeva provide relevant advantages:
Precise positioning of the load as they allow for accurate and rapid movements, while traditional handling devices overtravel, bounce and require lots of little corrective movements that reduce productivity.
Intuitive control: It features the “float mode” control or “hands on manipulation”, without actuating the control handle. It makes the most of the natural human ability to coordinate and control motion, thus allowing for a more intuitive control that means a more precise and quicker positioning of the load, especially when this has to be placed in a narrow target as gently as possible.
Improved ergonomics and no effort required. Thanks to the microprocessor based control, the system supplies energy to win inertia both during acceleration and braking.
Speed: IADs respond swiftly, yet smoothly to human touch; the operator notices no time lapse between the machine’s sensing and its response.
Automatic and immediate compensation to weight: it allows handling loads with different weights or loads that vary their weight during handling (emptying out containers) with no stop times at all for turning selector.
|
|
|
ANVER's top-selling systems offer a simple, safe, economical solution to your bag and sack lifting needs. ANVER VT Vacuum Tube Lifting Systems can be configured to handle all load types: porous, semi-porous and non-porous. ANVER offers a free testing service in our ergonomics lab to assist you in determining your load’s porosity and to help you in choosing the appropriate vacuum lifting system.
|
|
Equipment designed for the “weightless” picking and moving of sacks - in polythene, cardboard, hessian, plastic fibre etc...Simple to use, this range of Dalmec machines allows the operator to move bags quickly, accurately and safely within the operating area.
The bags are picked with either a suction head or with a pneumatically clamp. Vacuum is created by an electric motor or by a Venturi ejector.
This range of manipulators offer maximum flexibility in type, design, dimensions and picking systems order to suit the specific requirements of the user and environmental conditions of the working area.
|
|
Pneumatic manipulating model Standard with tool of taken for movement bags
Description
The standard solutions allow to head at the certainty of the repetitive and optimized solution as from the numerous solutions supplied on similar demands. FAMATEC Standard offers to perfectly definable times of delivery and a precise definition of the technical aspects in phase of offer.
Technical details
In the event specific draft of an endowed manipulating of a system of taken flowing along the revolving and equipped arm of vertical movement through a detail is arranged of raising of the product. The solution is the ideal for who must enliven similari bags or products quickly (as an example scato them). The taken one happens through a ventosa and successively the product can be raised and moved on the horizontal plane in every point inside of the workspace.
The illustrated solution is available on autostabile base and fixed column.
The maximum capacity 65 kg
Range 4000 milimeter
|
|
The Tube of Lifting uses the same flow of aspiration for the catch of the product, the lifting and the transfer of the load. Thanks to this system of aspiration of reliable and robust design, it is possible to handle loads without effort in any safety for your operations of handling, palletization or depalettisation.
Charge up to 200 kg
Type charges: bags, paperboard, drum
|
|
Vacuum lifting with an INDEVA means more productivity, more ergonomics, more safety!! Specialists in vacuum lifting since 1975.
Scaglia INDEVA offers the most complete range of industrial manipulator on the market, including both traditional pneumatic manipulators and state of the art electronic manipulators, better referred to as INDEVA.
Pneumatic manipulators are ideal to handle offset loads while Indeva are ideal anywhere speed, fluid movement and exact positioning of the load are required.
|
|
| ... products without technical information |
| |
PRONAL lifting cushions can be used to lift loads of over 70 tonnes and are particularly useful in areas such as civil protection, security and defence.
They are also used in maintenance operations on construction sites and in various industries for moving, blocking and handling operations... Made from elastomer-coated fabrics, the cushions are vacuum vulcanised at a temperature of 140°C, thus ensuring that they are extremely tough.
Advantages :
- easy to install, thin when empty,
- uniform lifting power,
- high degree of control during lifting, progressive lifting process,
- high lifting force.They are also used for maintenance purposes on site and in industries for some operations as moving, stalling, handling...
|
|
|
If an ECO-Jack toe jack can not be operated, the load can be lifted with an ECO-Jack AIR lifting bag ranging from 1.000kgs (2,200lbs) to 42.000kgs (92,800lbs). Fitting into the tightest areas with a collapsed height of 30mm (1.1-1.2inches), all models are light weighted and equipped with serrated lifting surfaces, markes centers, reinforced edges and safety instructions.
|
|
To be able to achieve a maximum lifting movement with only a minimum insertion space available, lifting bags are the appropriate tools to use. With 12 models, Holmatro has a lifting bag for every job. Thanks to their unique low profile edges the lifting bags can easily be inserted under all circumstances.
The deflated height of our lifting bags is 22 or 25 mm. Using compressed air (maximum 8 bar), the largest model, the HLB 67, reaches a maximum inflation height of 520 mm. Another feature of the lifting bags is their ability to adjust to the lifting surface. The applied pressure is divided over a large surface compared to the use of hydraulic jacks.
|
|
The distinguishing feature of Vetter Mini Lifting Bags 8.0 bar/116 psi is the noiseless, jolt-free, and smooth lifting of the heaviest loads. They lift, push, press, prise and split, even on sloping surfaces. The surface profile improves grip on slippery ground such as grass, sand etetc.
They are produced in two versions. Both versions have a multi-layer construction which covers each side of the bag. This is either steelcord or aramide reinforcement.
|
|
INFLATABLE JACK
1-74 Ton
Highly flexible and lightweight jacks only require an air supply of 8 bar maximum. Any non-explosive gas or water can also be used for inflation.
Uninflated jacks are only 25,4 mm thick, making seemingly impossible lifting tasks routine.
Space age reinforced, multi-layer aramid construction, widely overlapping on all sides. Tested at 8 bar.
In rugged testing, jacks withstood tens of thousands of inflate/deflate cycles at 12 bar.
Large surface area and material flexibility allow jacks to lift loads on soft or ompressible surfaces without support cribbing being necessary.
|
|
Lifting devices
Lifting - Freeing - Cleaving
Mustlift is able to lift safely heavy loads on the ground or in water. Their compact size, allowing to place them quite everywhere, is obtained by a simple vulcanization of a high resistant elastomer coated fabric. They can be used on irregular surfaces thanks to their positive grip surface.
Mustlift lifting bags can be inflated with air or water at maximum 8 bar.
High-pressure flat lifting bag, made from coated fabric (polyester or aramid) vulcalized in one operation. Lifts up to 76 T in the standard range. Anti-slide coating
|
|
for quick application in close space!
- Multi-layer design with Armid material.
- Fill time with 8 bar within seconds.
- Extensive accessories, like suitable case etc.
|
|
|
The Superliner™ SL220 Gusseted Bag Maker & Bag Inserter makes a polybag from Roll Stock Film of Continuous Gusseted Polyethylene Tubing, inserts the bag into a bottom closed shipping container: case, crate, drum or tray, and cuffs the bag over the edges.
|
|
|
|
|
|
Bag Inserter Opens, Inserts, and Cuffs Bags Up To 18 CPM!
The Pearson B18 Bag Inserter is designed to automatically open and insert a plastic bag into an empty RSC. Tablock RSC. HSC, FOL, or Bliss style case, tray, or container at speeds up to 18 cases per minute. This Bag Inserter is an extra heavy duty, three shifts per day, dependable machine capable of handling a wide range of bags, styles, and sizes.
Flat or gusseted bags from presealed and perforated roll stock are fed to an opening station. A vacuum plenum secures the bag and the carriage opens the bag above the waiting case. A cuffing mechanism contains the bag and permits a mandrel to enter the bag and travel to the bottom of the container. Simultaneously, the cuffing mechanism cuffs the bag.
As the mandrel is retracting, the carriage closes to allow the vacuum plenums to secure the next bag, maximizing vacuum establish time. When the mandrel is retracted, the case is released to transfer out of the loading station.
For future capacity requirements, Pearson's BI18 is fully upgradable to the BI25 Bag Inserter for speeds up to 25 cases per minute.
Pearson's BI18 can either be positioned over an existing conveyor or one can be supplied by Pearson as an option. Case control guides and case indexer are standard. This machine is equipped with a fully enclosed guard package, complete with electrical interlocks. An Allen-Bradley6, PLC, PackML compliance, ULe Listed Control Panel, two bag roll stands, and inventory control photoeye at discharge are also standard.
|
|
The bag in box BC-01 is feed the bag from a roll, seal and fold the edge around the box.
The bag placing technology can be widely used and is very flexible. The film dimensions, thickness and materials (LDPE, HDPE, etc.) can vary largely.
The technology can be found in various concepts (solutions) and in various forms.
The technology can be widely used. Businesses benefit from optimum product protection and transport.
|
|
Specialised high frequency welder Signa Duo Max for blood bags production. It can also be used in other industrial branches. Thanks to the high-tech solutions You can obtain top quality products.
Signa Duo Max has two working tables on one side which are driven by gear chain transmission. Thanks to that solution there is only one operator to control the whole welding process.
+ medical and healthcare
car industry
packing
stationery & decorating industry
|
|
Filter Collar Bonder™
Designed for attaching plastic circular collars to nonwoven filter bags
Suited for low-production assembly of bag filters for chemical and industrial liquid applications
Can assemble between 50 and 80 bags per hour*
Six-step welding process takes as little as 45 seconds to produce a reliable 360-degree bond
Speeds production by eliminating need for adhesives
Easy and quick tooling changes to accommodate collars from four to seven inches in diameter
Minimal training required
*For assembly of up to 200 bags per hour, Sonobnd's RingMaster™ is the machine of choice
|
|
|
|