|
|
RD modules for rounds:
Permanent-electro magnetic modules for rounds handling.
The special shape allows to easily clamp loads with curve surfaces.
CO / CV modules for coils handling:
Permanent-electro magnetic modules for coils handling, even in vertical or horizontal eye.
Special equipments for full-automatic lines.
|
|
They are designed for sheets with thicknesses starting from 4mm.
The model TM4, equipped with 4 permanent-electro cross-beams, is able to lift loads up to 12m lenght and weight up to 20 tons.
The TM6 version, equipped with 6 cross-beams, is able to work with loads up to 16m lenght and 25 tons SWL.
The hydraulic system allows high precision and reliability in time.
The same permanent-electro magnetic technology used in the TM model, but installed on a more economical fixed beam.
Capacity up to 10 tons, max load lenght 6m.
Allow to handle sheets from vertical position (stacks) to horizontal (machine bed) and vice versa.
Permanent-electro magnetic modules for profiles handling.
The modules are installed on a fixed beam, in tailor-made configurations with 2/4/8 pieces.
Fixed beams for laser / plasma cutted pieces.
The special shape and layout of the permanent magnets allows to handle the cutted pieces.
|
|
PRONAL lifting cushions can be used to lift loads of over 70 tonnes and are particularly useful in areas such as civil protection, security and defence.
They are also used in maintenance operations on construction sites and in various industries for moving, blocking and handling operations... Made from elastomer-coated fabrics, the cushions are vacuum vulcanised at a temperature of 140°C, thus ensuring that they are extremely tough.
Advantages :
- easy to install, thin when empty,
- uniform lifting power,
- high degree of control during lifting, progressive lifting process,
- high lifting force.They are also used for maintenance purposes on site and in industries for some operations as moving, stalling, handling...
|
|
The manual lifter of the MaxX Tecnomagnete series represent an ideal solution for moving ferrous loads in an economic, rapid and safe way.
RAPID
With the simple motion of a lever, the magnetism lifts, transports and releases the load with extreme rapidity, needing only a single operator. It does not compress or deform the load, rather, it allows plenty of motion even with limited spaces.
SAFE
Once activated, a spring-loaded device blocks the manoeuvring lever, thus preventing any possible accidental deactivation. The technique defined as neutral crown will not permit interference with the original state of the permanent magnets, thus allowing to obtain maximum results in terms of safety and reliability.
ECONOMIC
The Tecnomagnete manual lifters are based on the technology of permanent magnets, therefore do not need electrical feeding. They are resistant to usage: the only movable component present is a rotor which is centred on ball bearings. This in turn develops neither physical contacts nor any friction during the rotation phase. Within normal working conditions they can be “maintenance free” over a long period of time.
|
|
|
Designed for the warehousing, beverage, appliance and electronics industries, carton clamps allow palletless handling, and save money on pallet purchasing, maintenance, shipping and storage. Also improve warehouse space utilisation.
|
|
LONGITUDINAL ELECTRO LIFTING MAGNETS
These magnets are used to lift bundles of material with an irregular surface, which complicates lifting operations. Longitudinal magnets, however, have a particularly deep penetration field that makes them unsusceptible to such irregularities. This enable safe and effortless transport of bundles of material. Moreover, two or more of these magnets can be used, depending on the length of the bundles. In the event that people are present in the lifting area, however, extra mechanical slings must be fitted for safety purposes.
|
|
BAT GRIP
3 Ton capacity permanent-electro lifters with battery.
Equipped with a remote control, this lifter is capable to be used for a long period independent of the power supply (est 7
days), because the energy is only used for a fraction of a second during the MAG/DEMAG phase.
|
|
Requires very small access gap of only 10 mm
Lifting force 16 ton at 700 bar hydraulic pressure
Each step can spread under full load
Straight vertical lifting
Unique interlocking wedge design: no first step bending and risk of slipping out
Single-acting, spring return cylinder
Lifting wedge LW-16 includes safety block SB-2
|
|
The distinguishing feature of Vetter Mini Lifting Bags 8.0 bar/116 psi is the noiseless, jolt-free, and smooth lifting of the heaviest loads. They lift, push, press, prise and split, even on sloping surfaces. The surface profile improves grip on slippery ground such as grass, sand etetc.
They are produced in two versions. Both versions have a multi-layer construction which covers each side of the bag. This is either steelcord or aramide reinforcement.
|
|
To be able to achieve a maximum lifting movement with only a minimum insertion space available, lifting bags are the appropriate tools to use. With 12 models, Holmatro has a lifting bag for every job. Thanks to their unique low profile edges the lifting bags can easily be inserted under all circumstances.
The deflated height of our lifting bags is 22 or 25 mm. Using compressed air (maximum 8 bar), the largest model, the HLB 67, reaches a maximum inflation height of 520 mm. Another feature of the lifting bags is their ability to adjust to the lifting surface. The applied pressure is divided over a large surface compared to the use of hydraulic jacks.
|
|
- Vertical lift and turn objects in one smooth operation.
- Hardened steel jaws for secure is grip, and cam mechanism engages as vertical pressure is applied to hook ring.
|
|
The use of electro & permanent lifting magnets offers the following advantages:
- Speed, simplicity and the damage-free transport of workpieces of various
shapes and lengths.
- The possibility of precisely positioning the workpiece to be lifted
- Saving valuable storage space and manpower
All magnets can be supplied with electronic control. The control is equipped with an IGBT that switches the current to the magnets. Both voltage and current can be set at, for example, 80-100 and 120% for lifting, transport and compression.
|
|
The manual lifters of the MaxX series represent an ideal solution for moving ferrous loads in an economic, rapid and safe way.
They are available in a range between 125kg (275 lbs) to 2000 kg (4400 lbs) capacity. Safety factor 3.
The radio-controlled Bat-Grip lifters are useful to handle loads with a remote control, without power supply connection.
They are feeded by a standard battery, with high capacity.
In fact the electricity is used only during MAG and DEMAG phases, keeping the battery level up for a long time (around 1 week charge).
EM modules for bundles: Electromagnetic modules with capacity up to 8 tons.
They allow to clamp bundles or packs of rounds, sections, sheets and other ferrous loads already strapped.
|
|
EM modules for bundles
Electromagnetic modules with capacity up to 8 tons.
They allow to clamp bundles or packs of rounds, sections, sheets and other ferrous loads already strapped.
|
|
|
The lifting clamp is removable loading gripper equipment used on a lifting apparatus for lifting and transporting individual flat. Loading capacity max Kg. 1000. The thickness of the glass plates can be from 4 till 55 mm.
|
|
Located in the north of France, SP2i is specialize in the design and the manufacture of lifting and handling tools for all type of heavy loads.
Today, our experience and know-how in this field, allow us to offer you a large range of tongs adapted to your needs and to your working environment, in the respect of the standards and regulations in force, as well as your own requirements.
Even if the iron and steel sector is our main customer, we also work with the car industry, the railway industry and paper mills … too.
Our tongs are robust, reliable, and a great handiness.
A lot of options are available to satisfy your requests.
In horizontal or vertical Axis
Several versions : Mechanical, Electromechanical, Electrohydraulic
Alternatives : C-hook… Lifting beams …
Types of loads :
- Rolls Mills,
- Flat products,
- Ingots, Slabs …
- Press Tools.
- Bars or pipes bundles …
- …
|
|
Electropermanent magnets utilize permanent magnetic material surrounded by an electrically powered coil. To energize an electropermanent magnet, a momentary pulse of D. C. power is applied to the magnet's coil in order to charge the permanent magnetic material within. Once energized, the electropermanent magnet does not require a constant source of power to retain the lifted steel coil. To release the steel coil, a reverse pulse of D. C. power is applied to the magnet's coil. The Electropermanent magnet design tends to excel when the steel coil's edge stagger is kept to a minimum.
Special Adaptations (Standard Circular, Rectangular, and Bi-Polar)
Able to prevent "telescoping"
Less storage space required
Transport requires less manpower
|
|
Located in the north of France, SP2i is specialize in the design and the manufacture of lifting and handling tools for all type of heavy loads.
Today, our experience and know-how in this field, allow us to offer you a large range of tongs adapted to your needs and to your working environment, in the respect of the standards and regulations in force, as well as your own requirements.
Even if the iron and steel sector is our main customer, we also work with the car industry, the railway industry and paper mills … too.
Our tongs are robust, reliable, and a great handiness.
A lot of options are available to satisfy your requests.
Horizontal grasp
Several Versions : mechanical, Electromechanical, Electrohydraulic
Types of loads :
- Coils,
- Flat products,
- Ingots, Slabs …
- Press Tools.
- Bars or pipes bundles …
- …
|
|
The Eagle Lift® utilizes state of the art technology to make a powerful, lightweight permanent lifting magnet. Our exclusive Test Talon® feature allows an operator to safely test load feasibility and a deep "V" notch between the pole shoes allows greater stability when lifting round stock.
- Permanent Magnet; does NOT require electricity
- Smooth Lever Action between Off & On positions
- Bi-Polar capabilities enable the unit to lift both flat and round stock safely
- Safety factors exceeding industry standards
- Single hand operation
- Very little residual magnetism at OFF makes lifter positioning easier
- Portable, compact and lightweight
- 3 Year Warranty
- Made in the USA
|
|
Features:
Cold Operation
Since the electrical current is only used momentarily, no insulation or coil failures are caused by internal heating.
Safer Holding
The permanent magnetic material is unaffected by external power failure. Since Electro-Permanent magnets require electricity only to activate the magnet "on" or "off", there are no mechanical parts that could accidentally stick. Once the magnet is "on" the electricity can be disconnected indefinitely without any interruption to the holding power.
Cycle Time
Energizing the magnetic material typically takes 2-3 seconds.
Power Consumption
Operating costs are very low compared to conventional electromagnets because the power is applied for a minimal time.
|
|
Located in the north of France, SP2i is specialize in the design and the manufacture of lifting and handling tools for all type of heavy loads.
Today, our experience and know-how in this field, allow us to offer you a large range of tongs adapted to your needs and to your working environment, in the respect of the standards and regulations in force, as well as your own requirements.
Even if the iron and steel sector is our main customer, we also work with the car industry, the railway industry and paper mills … too.
Our tongs are robust, reliable, and a great handiness.
A lot of options are available to satisfy your requests.
Horizontal grasp
Several Versions : mechanical, Electromechanical, Electrohydraulic
Types of loads :
- Coils,
- Rolls Mills,
- Flat products,
- Ingots, Slabs …
- Press Tools.
- …
|
|
Walker incorporates other special features into Heatmaster® Magnets, including 100% duty cycle operation, cooling fins, and proprietary insulation materials. Heatmaster® Magnets built with these unique design features run "cool" in extreme conditions.
Different models for different temperature ranges
No external cooling required
No hassles due to fans, radiators or waterlines
75% and 100% Duty cycle operation
Welded watertight design
Special proprietary insulation utilized for layer-to-layer, turn-to-turn, coil-to-case insulation
Alloy steel lift chains or solid bails, as required
Heavy manganese steel bottom plate
Heavy-duty fabricated and cast construction available
|
|
Located in the north of France, SP2i is specialize in the design and the manufacture of lifting and handling tools for all type of heavy loads.
Today, our experience and know-how in this field, allow us to offer you a large range of tongs adapted to your needs and to your working environment, in the respect of the standards and regulations in force, as well as your own requirements.
Even if the iron and steel sector is our main customer, we also work with the car industry, the railway industry and paper mills … too.
Our tongs are robust, reliable, and a great handiness.
A lot of options are available to satisfy your requests.
Horizontal or vertical grasp.
Several versions : mechanical, Electromechanical, Electrohydraulic
Stripping, Recovery Flat, Multifunctions, with or without tipping.
Types of loads :
- Coils,
- Rolls Mills,
- Flat products,
- Press Tools.
- Bars or pipes bundles …
- …
|
|
Slings and load suspension equipment from STAHL CraneSystems facilitate lifting and transporting loads where more than one hook is required. The broad spectrum permits practical solutions and particularly safe connections between load and load hook. Robust and long-lived, they follow the accustomed rigorous quality of all STAHL CraneSystems products.
STAHLplus is the direct mail order range of accessories and material flow technology for crane and logistics: slings and accessories, grabs, lifting beams, load cells and load securing equipment. These are accompanied by comprehensive consultation on site, the mobile testing service and the free information service.
|
|
~ The new CY clamp is based on our successful 92 series range of clamps and incorporates the new universal hinged hookring.
~The CY Hinged Universal Plate Clamp has been developed especially for the handling of plate at any angle thus permitting the awkward lifts previously considered hazardous.
~ Suitable for all structural steel up to 300 Brinell surface hardness.
|
|
ROUND LIFTING MAGNETS
Electromagnets are intended for lifting mechanisms to catch and shift the cold ferromagnetic loads: scrap metal, charge, cuttings, metal bars, pigs, slabs, etc.
These lifting electromagnets can operate on the traverse.
Electromagnets are recommended for installation on light and mobile excavators such as FUCHS, LIEBHERR, ATLAS, SENNEBOGEN, CAT, ZEPPELIN, KOVROVETS etc. complete with a generating control system and a special traverse that ensures the use of an electromagnet without removing the grab.
All electromagnets can be produced as heat-resistant (to lift loads of the temperature as high as 600°C) and for underwater works.
|
|
Safely lift and move steel without direct attachment by slings, hooks or cables. Complete line in both permanent and electro designs with various models, sizes and strengths to handle many different lifting jobs.
SafeHold® Permanent Lifting Magnets
Lift up to 10,000 lbs (4,536 kg). Compact permanent magnets lift and transfer steel and iron without slings, hooks or cables.
Selecto® Electro Lifting Magnets
The SL Series requires a compact Eriez variable-voltage rectifier controller or a fixed voltage rectifier to furnish the desired D.C. power from any A.C. source.
Bi-Polar Lifting Magnets - Rectangular
Specifically designed to provide greater contact and holding strength on castings, forgings, plates and structural shapes.
Bi-Polar Lifting Magnets - Square
Especially deep field provides greater holding on steel coils, bundles of bar, re-bar, tubing or pipe.
Rectangular Lifting Magnets
Three standard models, and lengths from nine inches (229 mm) to 96 inches (2,438 mm), allow you to size the magnet to the job. Eriez' smallest single unit has a holding power (with no safety factor) of 1,860 (845 kg; the largest, 38.8 tons (35,240 kg).
Circular Lifting Magnets
Eriez circular lifting magnets are general-purpose magnets with many applications.
|
|
CM-400, CM-800 TOTERS
The TOTER is a compact, self-contained, lifting magnet which uses permanent magnets that maintain holding power indefinitely. Within the steel housing are powerful ceramic magnets whose field is controlled by the "on-off" position of the handle. Because no electric power is required, TOTERS can operate completely free of the restriction of power cords, and can be used where electric power is not readily available.
Recommended Applications
Permanent lifting magnets require good surface conditions to achieve maximum lifting.The TOTER is ideally suited for in-plant handling, loading, and unloading machine tools, and is commonly found in industrial plants, machine shops and warehouses.When greater holding capacity is required, refer to our battery magnets or our circular electric magnets.
Rated Lift Capacity
The maximum rated lift is based upon lifting clean, smooth, flat, low-carbon steel plate, 1 1/2" or thicker with the full area of the magnet's lifting surface in contact with the load. Derating is required for plates with rust or scale, plates thinner than 1 1/2", and alloy steels. More detailed ratings are contained in the OPERATOR'S MANUAL AND SAFETY INSTRUCTIONS.
|
|
Located in the north of France, SP2i is specialize in the design and the manufacture of lifting and handling tools for all type of heavy loads.
Today, our experience and know-how in this field, allow us to offer you a large range of tongs adapted to your needs and to your working environment, in the respect of the standards and regulations in force, as well as your own requirements.
Even if the iron and steel sector is our main customer, we also work with the car industry, the railway industry and paper mills … too.
Our tongs are robust, reliable, and a great handiness.
A lot of options are available to satisfy your requests.
Horizontal grasp
Several Versions : mechanical, Electromechanical, Electrohydraulic
Types of loads :
- Coils,
- Rolls Mills,
- Ingots, Slabs …
- Press Tools.
- Bars or pipes bundles …
- …
|
|
|
RECTANGULAR LIFTING MAGNETS | | |
