|
|
* type LBR uses mechanical, type LBH hydraulic lifting
* balls allow movements at any angle
* moderate rolling friction
* especially useful for dies that have to be accurately positioned by hand
|
|
Changing technique for rapid die change:
Die changing technique using roller bars, ball bars, ball inserts, carrying consoles and die carts. Everything to allow easy and safe die changing.
Carrying consoles – Die changing consoles:
Consoles to permit easy, safe and efficient die change on the press bed. Carrying console, either swivelling or supported, for large weights of up to 250 kN. Set-up times reduced to a minimum, this guarantees more efficient use of the machine and a high degree of operational safety.
Die carts for rapid die change:
HILMA die carts facilitate the handling of heavy dies. All the robust die carts are designed for changing dies weighing up to 40 kN on presses and machines without risk of accidents, without using force and in an efficient (time-saving) manner. Their solid construction guarantees a long service life. The die carts designed to withstand the harsh conditions prevailing in a press shop are very reliable “partners”.
|
|
|
|
|
|
Bespoke 'T' & 'B' Block Systems for Rapid Tool
Change. Roll on - Roll off facility dramatically reduces
tool changeover times.
Advantages:
Roll on - Roll off facility:
- Dramatically reduces tool changeover times.
- Eliminates tool and press bed damage.
- Allows accurate tool positioning.
The Omnitrack 'T' & 'B' Block systems are designed to facilitate
rapid tool change on any type of press / machine.
The standard format consists of housed spring-loaded Ball Units
which are inserted into the tenon slots of the press. When in the
raised position, the balls protrude above the bed level allowing
the tool to be rolled onto the bed and positioned accurately.
When clamping is carried out the balls retract, lowering the tool
onto the press bed. When clamping is released the balls lift the
tool, allowing it to be rolled from the press.
Standard slot dimensions for 'T' & 'B' bars are shown. We also
manufacture these systems for non-standard slots. Ball pitch,
deflection, load and clamping are application specific. Contact
us for a bespoke solution.
|
|
The slots in the press table define the shape and size of the required ROLLBLOC die lifters.
ROLLBLOC ball version offer the advantage of being able to easily move dies in any direction. In conjunction with different die formats, this advantage ensures particularly short setup times.
ROLLBLOC roller version offer double the load bearing capacity. They enable exact linear transfer of the die. This linear technology requires accurate die positioning during transfer to the die table or to the die loading arms.
To further reduce rolling friction, we recommend hardened strips on the underside of the die. Unlike the ball version, the ROLLBLOC die lifter with rollers can also be used in the die base plate (overhead installation).
|
|
* for die weights above 10 tons
* low rolling friction
* hydraulic lifting
* underside can be used to move rolling bolsters
|
|
ROLLBLOC lateral guides
To guide dies. For use on one or both sides.
Type SE with slanted entrance on both ends and from above
- ROLLBLOC lateral guides with guide rollers
- One or two-sided guide for pressing dies.
- 2 versions
|
|
Floway® track
Roller tracks from Interroll have what it takes to convey featherweights as well as heavy weights, reliably and qui etly from the input end to various order-picking stations – year in, year out, maintenance free. This combination of features is truly unique. The staggered arrange ment of the components increas es the load capacity of our roller tracks even further.
This unique track is the only one in the world that incorporates qualities from all the other tracks on the market today. Also it is the only track
designed not to open; even under heavy loads.
- Floway® track cannot open under heavy loads.
- High capacity rollers made from High Density polyethylene.
- Electro-zinc plated profile that will not distort under a load.
- Bearing, rotates on steel stub axle.
- Operating temperature: –31°F to 104°F/–35°C to 40°C.
-Max. load per bearing, static: 26 lbs / 12 daN, dynamic (moving 1.6 f/s / 0.5 m/s): 18 lbs / 8 daN.
|
|
To be able to achieve a maximum lifting movement with only a minimum insertion space available, lifting bags are the appropriate tools to use. With 12 models, Holmatro has a lifting bag for every job. Thanks to their unique low profile edges the lifting bags can easily be inserted under all circumstances.
The deflated height of our lifting bags is 22 or 25 mm. Using compressed air (maximum 8 bar), the largest model, the HLB 67, reaches a maximum inflation height of 520 mm. Another feature of the lifting bags is their ability to adjust to the lifting surface. The applied pressure is divided over a large surface compared to the use of hydraulic jacks.
|
|
for quick application in close space!
- Multi-layer design with Armid material.
- Fill time with 8 bar within seconds.
- Extensive accessories, like suitable case etc.
|
|
|
A whole range of hydraulic actuating cylinders, pumps manual or motorized, two ranges of hydraulic presses, hydraulic ranges of tools: hydraulic extractors, tear off-hubs, crichs, jacks with shoe,...
|
|
|
High performance LED bargraphs in a variety of standard stackable packages are designed for use either singly or as a multiple units in applications such as instrumentation, audio equipment, level indicators and computer peripherals. Using an LED bargraph eliminates the alignment and colour matching problems associated with arrays of single LED indicators.
|
|
|
|
|
|
FEATURES :
* Microcontroller based design.
* Single Universal Input (8 user selectable).
* Two fixed type of inputs.
* Built in square root extractor for 4-20mA (optional)
* Two relay outputs for High, Low or Deviation per input.
* 4-20mA retransmission output linearized and proportional to PV.
* PID control output per input (optioanl)
* Bright red LED display for PV and SV.
* 51 LED bar graph display for PV or SV Or Both
* Built in 24VDC loop supply.
* IP 20 metal enclosure (144 x 72 x 120)mm
* RS 485 modbus serial interface (Optional).
Product Description:
Libratherm offers Micro controller based single or two input Bar Graph Process Indicator model BGI-144-S and BGI-144-D with both Digital and Bar graph display. In addition, the instrument provides single or dual analogue retransmission output of 4-20mA and built in 24VDC loop supply to power external loop transmitter. The process value is converted into equivalent percentage value and is displayed on the bar graph using 51 red LEDs. Serial communication on RS485 2 wire with MODBUS RTU protocol is also available with programmable modbus ID in slave mode. BGI-144 is available in 144 x 72 x 120mm panel mounting enclosure with ABS bazel, polycarbonate graphics and metal enclosure. BGI-144 works on 90 to 250VAC supply.
|
|
| ... products without technical information |
| |
MINI-JUMBO / JUMBO
A space-saving, single/double-sided pull-out rack for the storage of all kind of products, which must be accessible quickly and easily. The fully retractable support arms, which can be extended using a manually operated handle, are supported on hardened steel rollers, and are equipped with permanently lubricated "sealed-for-life" needle bearings. Materials of a short length, and materials which easily deflect, may be stored, if required, in storage trays. The arms are suitable for variable compartment divisions through adjustable pins.
|
|
CRADO
A unique system witch makes storage and handling of heavy, long materials and products possible. There were you want to use floorspace to a maximum and gain rapid access to a large inventory the Stacking Cradle System delivers solutions. An overhead crane and a spreader beam are used for stacking resp. restacking and manoeuvring of the cradles. The open design of the cradles allows easy material access, which reduces access times.
|
|
-Ideal for bar stock, sheet metal and other bulky goods up to a length of 24 m
-Ideal for all storage volumes and small to medium turnover rates due to easy access, less floor space and uncomplicated operation
-Restacking with manual single and multiple-lift spreader beams UNIBLOC E and UNIBLOC U (restacking of up to 3 cradle layers simultaneously with mechanical grippers )
-Access to individual bars with Kombi-Spreader Beam: Magnet-Spreader Beam UNIBLOC F
-Automatic stacking with Spreader Beam UNIBLOC A with up to 20 picks per hour optional
|
|
* type LBR uses mechanical, type LBH hydraulic lifting
* balls allow movements at any angle
* moderate rolling friction
* especially useful for dies that have to be accurately positioned by hand
|
|
Changing technique for rapid die change:
Die changing technique using roller bars, ball bars, ball inserts, carrying consoles and die carts. Everything to allow easy and safe die changing.
Carrying consoles – Die changing consoles:
Consoles to permit easy, safe and efficient die change on the press bed. Carrying console, either swivelling or supported, for large weights of up to 250 kN. Set-up times reduced to a minimum, this guarantees more efficient use of the machine and a high degree of operational safety.
Die carts for rapid die change:
HILMA die carts facilitate the handling of heavy dies. All the robust die carts are designed for changing dies weighing up to 40 kN on presses and machines without risk of accidents, without using force and in an efficient (time-saving) manner. Their solid construction guarantees a long service life. The die carts designed to withstand the harsh conditions prevailing in a press shop are very reliable “partners”.
|
|
|
|
|
|
Bespoke 'T' & 'B' Block Systems for Rapid Tool
Change. Roll on - Roll off facility dramatically reduces
tool changeover times.
Advantages:
Roll on - Roll off facility:
- Dramatically reduces tool changeover times.
- Eliminates tool and press bed damage.
- Allows accurate tool positioning.
The Omnitrack 'T' & 'B' Block systems are designed to facilitate
rapid tool change on any type of press / machine.
The standard format consists of housed spring-loaded Ball Units
which are inserted into the tenon slots of the press. When in the
raised position, the balls protrude above the bed level allowing
the tool to be rolled onto the bed and positioned accurately.
When clamping is carried out the balls retract, lowering the tool
onto the press bed. When clamping is released the balls lift the
tool, allowing it to be rolled from the press.
Standard slot dimensions for 'T' & 'B' bars are shown. We also
manufacture these systems for non-standard slots. Ball pitch,
deflection, load and clamping are application specific. Contact
us for a bespoke solution.
|
|
The slots in the press table define the shape and size of the required ROLLBLOC die lifters.
ROLLBLOC ball version offer the advantage of being able to easily move dies in any direction. In conjunction with different die formats, this advantage ensures particularly short setup times.
ROLLBLOC roller version offer double the load bearing capacity. They enable exact linear transfer of the die. This linear technology requires accurate die positioning during transfer to the die table or to the die loading arms.
To further reduce rolling friction, we recommend hardened strips on the underside of the die. Unlike the ball version, the ROLLBLOC die lifter with rollers can also be used in the die base plate (overhead installation).
|
|
CW and QCW Laser Diode Bars
Lasertel's CW and QCW laser diode bars are adaptable to a wide range of applications that demand superior performance and efficiency.
Lasertel delivers...
Multiple power levels
Multiple peak wavelength options
High efficiency operation
TE or TM polarization
ISO 9001:2000 and RoHS compliance
|
|
Description
HTOE Laser diode array series has been designed to provide the high output power, long lifetime and high reliability required for solid laser pumping ,medical usage and other high power laser diode applications.
Features
* CW output power 280W
* Spectral width ≤4nm
* High Reliability
* High efficiency
Applications
* Laser pumping
* Medical Usage
* High power laser diode applications
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
