|
|
Dalmec offer a wide range of manipulators designed for the “weightless” handling of cardboard boxes, packaged wooden cases, products covered in film (polythene, shrink - wrap etc….).
Simple to use, they allow the operator to move a whole variety of packaged products, cardboard boxes and wooden cases quickly, accurately and safely throughout the working area.
Boxes can be picked either with suction tooling or with a pneumatic gripper head. Vacuum is created by either by an electric generator or by a ”Venturi” ejector.
The type, design, dimensions and picking system of the manipulators offered are tailored so as to suit the specific requirements of the user and to the varying environmental conditions available.
|
|
Handling attachment with vacuum pad. Indicated for handling of cardboard boxes or parcels.
It is the quickest and economic way for this kind of handling.
Vacuum generation by electric vane pump.
Max capacity 180 kg.
Accessories: quick disconnection for suction pads, angular adaptor, flexible extended manouvre handle, etc.
|
|
Scaglia INDEVA offers the most complete range of industrial manipulator on the market, including both traditional pneumatic manipulators and state of the art electronic manipulators, better referred to as INDEVA.
Pneumatic manipulators are ideal to handle offset loads while Indeva are ideal anywhere speed, fluid movement and exact positioning of the load are required.
|
|
ANVER Vacuum Tube Lifters are easy to learn and simple to operate for loading and unloading cartons without manual lifting, bending, and stretching.
ANVER Vacuum Tube Lifters can be equipped with an extension handle that allows one person to unload and stack boxes without excessive reaching, stretching, or back strain. Models are offered to handle loads from 5 lb (2.3 kg) for non-porous loads, all the way up to 660 lb (300 kg).
|
|
Ladder racks for panel vans / PE
The PE can be adapted to fit all panel vans, whatever the make, thanks to an installation kit unique to each type of vehicle.**
Admissible load: 60 kg per side!
Maximum load: 80 kg per side!
43 turns on the operating handle for loading or unloading, i.e. less than 30 seconds!
|
|
With Protema lifts, difficult and potentially harmful lifting can be avoided and an ergonomic method of moving goods can be achieved. The first Protema lifter was developed in 1977. Today’s third generation lifts are a result of years of practical experience and development. Industrial kitchens, pharmacies, libraries and manufacturing companies use electric lifts to lift boxes, rolls, reels and other goods.
Lifting boxes
Protema lifts are manufactured with an emphasis on functionality, flexibility and reliability. They are lightweight, low-maintenance and battery driven with a built-in charger.
|
|
Lev 300
Capacities :
Grip width between 400 - 800 mm Lift height up to 3,00 m Max load = 300 kg up to 1,70 m Length of forks : 570 mm and 720 mm with sliding plates.
Description :
The LEV 600 and the LEV 300 have been designed to convey loads that cannot be handled with a conventional stacker. They are particularly suited for moving loads sitting directly on the floor
|
|
| ... products without technical information |
| |
Autokap™1200 Series Single-Head Fully-Automatic filler can fill:
- 3 litre bags at up to 16 bags per minute
- 5 litre bags at up to 14 bags per minute
- 10 litre bags at up to 11 bags per minute
- 20 litre bags at up to 9 bags per minute.
Filler Description
- Autokap™ 1200 is a Single-Head Fully-Automatic bag filler ideal for a large range of fresh or stable liquid products.
- The filler can fill bags from 1.5 to 25 litres in capacity.
- Autokap™1200 is Servo driven and is designed for automatically loading bags into boxes.
- Each filler is specified for the required type of liquid to fill. A large range of fitments is compatible with the Autokap™1200 series.
- Up to four fillers can be installed as integrated pair for high output applications.
|
|
Autokap™1400 Series Single-Head Fully-Automatic filler can fill:
- 3 litre bags at up to 32 bags per minute (16 bags per minute per head)
- 5 litre bags at up to 26 bags per minute (13 bags per minute per head)
- 10 litre bags at up to 22 bags per minute (11 bag per minute per head)
- 20 litre bags at up to 16 bags per minute (8 bag per minute per head)
Filler Description
- Autokap™ 1400 is a Fully-Automatic bag filler ideal for a range of fresh or stable liquid products. It is available both as a single or twin head filler.
- The filler is designed to fill 1.5 to 25 litre bags in capacity.
- Autokap™ 1400 is designed for automatically loading bags into boxes.
- Each filler is designed for the required type of liquid to fill. A large range of fitments is compatible with the Autokap™ 1400 series.
- A box conveyor can be fully integrated to the filler (available as option.)
|
|
Production is dependent on product supply conditions and the dexterity of the operator.
Typical examples of output based on water are the following:
- 1000 litre bags at up to 7 to 12 bags per hour
- 200 litre bags at 20 to 25 bags per hour.
Filler Description
- Autokap™ 1000 is a Single-Head Semi-Automatic Bulk filler that can fill bags ranging from 250 to 1400 litre directly into drums and bins.
- The filler is setup to run a center glanded bag usually supplied in a folded format.
- After loading the bag, the fill head moves to the bottom of the container and rises as the bag fills from the bottom of the container.
- Fillers are specified for the required type of liquid to fill. The Autokap™1000
series is compatible with a large range of fitments.
|
|
|
|
|
|
Sterikap™ 890 Single-Head Semi-Automatic Aseptic filler can fill:
- 5 litre bags at 3 to 4 bags per minute
- 10 litre bags at 2 to 3 bags per minute
- 20 litre bags at 1 to 2 bags per minute
Sterikap™ 820 Single-Head Semi-Automatic Aseptic Filler Extended Shelf Life (ESL) filler can fill:
- 5 litre bags at 5 to 6 bags per minute
- 10 litre bags at 3 to 4 bags per minute
- 20 litre bags at 2 to 3 bags per minute
Filler Description
- The Sterikap™ 800 is a Single-Head Semi-Automatic bag filler ideal for a range of Aseptic and Extended Shelf Life (ESL) products.
- The filler can fill bags from 1.5 to 25 litres in capacity and be fitted with a variety of taps, caps and tubes.
- Sterikap™ 800 is ideal for startup and medium production. Bags are manually loaded into the filler. After filling, they are released for loading into boxes.
- The fill chamber and all product lines are automatically cleaned in place (CIP) after each production run and sterilized in place (SIP) before each run.
- The fill chamber is fully enclosed and sterility is maintained during production with a combination of steam, sterilant water or sterile air.
|
|
Intasept™ 2400 Single-Head Semi Automatic Aseptic filler for the 32mm gland format can fill:
- 5 litre bags at up to 4 bags per minute
- 10 litre bags at up to 3 bags per minute
Filler Description
- The Intasept™ 2400 Single-Head Semi-Automatic Aseptic range can fill bags from 2 to 30-litres in capacity.
- Bags are manually loaded into the filler. After filling, they are released to the rear of the machine for loading into boxes.
- The fill table can be adjusted to allow manual filling of 210 litre bags into drums (available as option).
- Two fillers can be installed as an integrated pair for twin-head operation.
- Intasept™ 2400 is available with 16mm or 32mm fill head. The filler is available in a qualified version for biomedical and pharmaceutical applications.
|
|
With its specially designed distribution nozzle and capping system, this vertical filler is easily and conveniently employed to fill “bag-in-box” containers with food and no-food, low and medium viscosity products. No extra pump is required.
Once filled-up and closed, the bag-in-box container is easily removed through the roller-conveyor.
|
|
| ... products without technical information |
| |
A modern, upgradable, automated filling machine, the Premia is ideal for medium and large-scale fiiling of vacuum bags and rigid containers from 2 tp 30 litres. The Premia carries out the following operation completely automaticallty : Begins filling cycle (DAS system) - removes top - removes air from the bag, meters flow and fills bag - nitrogen injection ( if option) - fits top - ejects the filled bag.
TECHNICAL CHARACTERISTICS
Liquid flow rate 82 HL/h
Air pressure 6 bar
Power 1KW
Voltage 220 / 380 V
Frequency 50 / 60 HZ
Air consumption 1 bar
Nitrogen pessure 1 m3/h
GENERAL SPECIFICATIONS
Minimum height in mm 1580
Width in mm 750
Depth in mm 930
Weight in kg 103
|
|
|
|
|
|
A totally new, fully-patented « 3 in 1 » concept, LINEA PACK® PACK offers the following range of functions in one single, exclusive machine unit : a cardboard box shaper, an automatic filling machine and a box sealer incorporating the Hot-Melt system. Extremely compact and space-saving, ideal for fixed or mobile filling lines LINEA PACK® provides a compilation of modern technology offering the opportunity for increased productivity while ensuring the quality of the packaged product.
Scope of application : Wine, fruit juice, water, milk, syrup, alcoholic beverages, soup... LINEA PACK® LINEA can be used to fill vacuum bag containers ranging from 2 to 20 litres Suitable for use with the following tap models: Vitop, Flex-Tap, Press-Tap, Vinitap. Other models as option.
STANDARD EQUIPMENT :
- Filling head which guarantees non-drip filling
- Hydraulic circuit which can be sterilised with hot water, steam or chemicals
- Siemens Touch screen with integrated modem (optional modem card) displaying
the different operating modes : work, maintenance, settings (with « repeat
» function), cleaning,...
- Integrated CIP circuit with liquid outlet for fixed work stations and
automated cleaning of vacuum and nitrogen circuits
- Vacuum monitoring and control : pressure and activation (integrated
anti start-up safety device)
- 360° multi-directional finger retainer plate
- Box shaper with squaring, bottom sealing and pressing functions
- Bag, tap and box detection... with associated alarm signals
- Overlapping flap closure kit as standard on box shaper and sealer
- Bag insertion chute adaptable to all box formats
- Post-insertion bag compacting function...
|
|
|
|
|
|
|
MTM Power GmbH, the specialist for high quality power supplies, offers in its program DC/DC converters for automotive applications. The series WRC is available with 30, 60, 100 and 150 W. The converters are designed for mobile use acc. to EN 50 155, LES-DB-BN 411 002 and IEC 571-1 (railway, automotive). The battery voltages 24, 36, 72, 90 and 110 V +40/-45 % are covered with three input voltage ranges. All four power ranges have a high efficiency and are available with single or dual output voltages. The converters have an extreme high reliability (MTBF >1.000.000 h, TA = +40 °C) and an isolation of at least 2,1 kVDC (prim.-sec.). The temperature range is -40...+85 °C acc. to EN 50 155. Other important features are resistance against vibrations and reverse polarity protection at the input. The power supplies can be used in 19" racks or for wall mounting with H15 connector. The series WRC needs no ground load, is short circuit protected and has extensive monitoring and protection systems.
|
|
DCS50
Battery powered DC/DC Converters for 19 inch Rack mounting purposes are available from the Huhn-Rohrbacher Power Supply Company. The power range covers 50 to 150 watts.
* 19"-Eurostandard
* EMI Compliant Design
* 3U / 8 HP / 160mm
* Wide Range Input 2:1
* Single Output 50 Watts
* Galvanic Insulation
* CE Sign
|
|
TPCMQ48 DC/DC Converters
1U High, Up to 700 Watts with Integral Hot-Swap Provision
* 48VDC to 12 or 24VDC
* Includes Isolated 5V, ¼A Standby Output
* Hot-Swap Operation
* Wide Range 40 to 60VDC Input
* Integral LED Status Indicators
* I2C Serial Data Bus Option
* Up to 8.8 Watts/Cubic Inch Power Density
* Low Profile: 1.6 Inches (41mm) High
* Single Hot-Swappable Connector
* Reverse Air Flow Option
* Staged Pin Engagement
* ORing Diode on Output
* 1U, 19” Rack Holds 3 Units
* Active Current Sharing
* Optimized Thermal Management
* No Minimum Load
* Control & Monitoring Features
* DC to DC Converter
|
|
DC/DC 19“
Single output 20 - 100 watts
Plug-in Power Supplies for your 19-inch application.
– 19" plug-in module
– Primary/secondary insulation 3000 VAC
– Overvoltage protection
– Output SELV according to EN 60950 and permanent short-circuit proof
– Remote on/off
– Parallel connection possible with load sharing
– EMC Standards EN 50081-1 and EN 50082-2
– VMEbus signals or Power-Fail available upon request
|
|
DC/DC 19“
Multiple output 50 - 70 watts
Plug-in Power Supplies for your 19-inch application.
– 19" plug-in module
– Primary/secondary insulation 3000 VAC
– Overvoltage protection
– Output permanent short-circuit proof
– Ripple at output < 25 mVpp
– Interference emission according to EN 55011 / EN 55022 Class B
– Outputs SELV according to EN 60950
|
|
| ... products without technical information |
| |
|
The LISA wall-mounted distribution boxes suit applications where low space is available.
|
|
|
The PSSR Universal Patch and Splice Sliding Rack Mount Panel is an excellent choice for applications requiring an extremely compact and easy-to-use design. It is used to patch, or to patch and splice fibers and to provide cross-connection capability. It accommodates up to 24 connections and can use a wide variety of connector types. The panel can be installed in either a 19” or a 23” rack and occupies only 1.75” 1U of rack space. Splice trays and internal fiber management are housed in a sliding drawer that latches securely in both the open and closed positions. Jumpers can exit either to the left or right at the front of the panel.
|
|
FIBRE MANAGEMENT IN CABINET, PATCH PANELS & DRAWER
Optical Fibre Splice Tray Lid
Managed with Radius Control and Dark Fibre Storage
Plain with Basic Storage Facility
Optical Fibre Splice Tray Hinge and Holder
Array Tray and Isolator Clips
Fibre Clips and Coupler Clips
Optical Fibre and Ribbon Fibre Splice Protector
900 Micron Buffered 15-Way Fibre Clip
Optical Fibre Flat Manifold
Strain Relief Boot - 900 Micron Fibre
Quick Panel Mount Strain Relief Gland and Slot In Version
900 Micron Boot and Short Buffered Fibre Boot
Optical Fibre Coiling Clip
Chain Plate
Optical Fibre Support Base, Network Saddle and Expandable Bracket
Dust Caps with Flexible Ties or Metal Chains
Optical Fibre Connector Cutout Adaptor and Cover
Snap Latch
8-Way SC Adapter
|
|
KITS
Amphenol Fiber optic provides termination kits for maintenance on cable assemblies and terminating cable assemblies on single or multiway butt joint and expanded beam connector. These kits contains all necessary tools to terminate connector.
To use the kit with benefits, a minimum training is required.
OTHER FIBER OPTIC PRODUCTS
As part of our Total System Support policy, Amphenol expertise and support are at your service from R&D to prototyping and production of transmission links as well as special devices and cabling or repairs.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
