|
|
Stainless steel drum-lifter with front tilting system and electrical lifting
Unsurpassed functionality!
Linear-positioned gripping equipment for drums with diameters of 350 - 600 mm.
Turning system for tilting.
Hygienic, rust-free stainless steel design.
Material: stainless steel 1.4301.
Surface: glass bead-blasted.
With manual synchronous telescopic hydraulics and serial rapid lifting and soft lowering.
Serial polyamide castor rollers and polyamide load-bearing tandem rollers.
With locking brake.
Dimensions: 1210 x 1100 x 1463 mm
Manual lifting: 720 mm
With manual GBK tilting system
(high turning point approx. 1170 mm)
Weight: 267 kg
Load-bearing capacity: 350 kg
|
|
|
Cumberland Drum Dumpers remove material from drums and places it into your material handling system quickly and affordably. The line includes open chute drum dumpers, dust containment units, and vertical lift & dump units for extended dump heights. All equipment comes in various capacities and your choice of carbon, stainless, or aluminum material of construction.
|
|
Bushman AvonTec manufactures drum handling equipment that holds drums securely during pick up, movement, and discharge operations. Each ergonomically designed lifter permits precise rotation, from the vertical to the horizontal plane and beyond, for controlled pouring and dumping.
All Bushman AvonTec's drum handling units meet or exceed the requirements of the latest revisions of ASME Specifications B30.20 and BTH-1, Design of Below-the-Hook Lifting Devices.
Each unit has a 3 to 1 safety factor, based on the yield strength of the material. This protects the operator, drum and its contents.
The self-locking worm drive speed reducer holds the drum in position without roll-back.
In addition to the standard features described below, most Bushman AvonTec drum tilters can be modified for a variety of different drum sizes and types including those frequently used for hazardous materials.
|
|
|
VacuEasylift lifts drums, tins and buckets in the pharmaceutical/chemical industries.These suction feet can be designed to move one or more objects at the same time.
|
|
Open Drum Truck
Open drums are easily transported with less danger of spillage. Handles 55-gallon drums easily on all welded powder-coated steel frame. 3" heavy-duty swivel casters and two 6 x 2" moldon rubber wheels support capacities to 1000 lbs.
|
|
|
Roll barrel M1-ROULEF1-1 Roll barrel with platform for fixing roller low position, directional wheel with Recommandé brake for barrels of 220L or 190kg
|
|
|
A practical way to handle 200 L capacity drums without dammaging them. Grip is secure even on surface that are not perfectly flat. Gripping and releasing are controlled automatically from the driver's seat.
|
|
Their robust construction ensures you better a longevity. Conceived to leave with the driver a released sight. Butted in caoutchoucpour to avoid damaging ls barrels.
Facility of disassembling of the galvanized hook. Fixing by screw of the amount of the device by grip allows remoplacement easy this one. A safety counters the slip basic non-intentionnelsur very commodity. Coating possible in enamelled or galvanized
|
|
|
|
|
|
Drum washing plants are particularly suitable for the continuous and at random treatment of small and medium-sized pieces, such as screws, bolts and small metal pieces in general. The material is moved forward by the slow rotation (at variable speed) of a cylinder, which contains a spiral at preset pitch. During the advancement motion, parts undergo cycles of treatment. Spiral continuous and slow rotation allows the movement of the pieces and the consequent removal of grease or swarf and drying them perfectly. The loading operations can be either manual or automated through automatic loading devices.
Ceever realization of standard machines is put side by side with the production of special cochlea realized in base to the specific demands of the client, both as regards the cycles of treatment (phosphating, de-phosphating, phosphate-degreasing, etc.) and mechanical sizing and/or special applications for automation.
In order to optimize the treatment cycles, are available, on request, several OPTIONAL:
Metering device pump for detergent
Mud dredge and chip remover
Masks of spraying
Deoiling
Filtrations
Drying and/or blowing
Additional tank
Heating to low dissipation
Weekly clock
Safety vat
Jointed nozzles
PLC and Modem
Rinse water control
Remote controls
Automatic loaders
Bases with wheels
Fumes exhaust system
Automatic fill-up
Automatic topping
|
|
Rosink Multi Cleaner MT: Aqueous parts cleaning with combined flush/spray system!
The Multi Cleaner MT is an economic, forward-looking, environmentally friendly, effective and compact multi-stage drum washer.
|
|
The Formula 950 rotary drum washer is designed for aqueous cleaning and drying of small parts either in batches or in-line with production conveyors.
Components are first carried through immersion and power jet washes at constant speed via an Archimedes screw. After draining, they are dried by hot turbo-blown air, emerging down the exit chute clean, dry and ready for use.
Typical components which can be processed include:
* Metal, plastic and rubber parts
* Pressings and stampings
* Screws, nuts and bolts
* Springs
* Seals
* Cold forged parts
* Machined parts
This machine can also be used as a coating machine for small components.
|
|
Mixed washing machines with drum
The washing plant with drum is particularly suitable for degreasing small metal parts (screws, nuts and bolts etc.).
The components to be treated are generally placed on a hopper which chokes the load of the machine.
The transport system consists of a spiralled drum which by rotating on its axis drags the pieces through the different stages of treatment and then unloads them on a chute or directly into baskets.
This is an extremely reliable and versatile plant.
|
|
Fives Cail's beet washing installations are among the best in terms of washing efficiency, reduction of sugar loss and are especially designed to save energy. The finishing drum was especially developed for an optimized washing of the beet groove.
Advantages of finishing drum
Contact of the beet with the rubber panels: Sugar losses reduced
All of the faces of the beet undergo cleaning
With effective washing there is a reduction of :
- Quantities of knives used
- Contamination of the diffuser
- Pressure losses in filtration
Maintenance reduced : due to abrasion
Fives Cail's equipment for beet washing:
Beet extractor
Pre-washing and washing drum
Stone catcher
Weed catcher
Finishing drum
|
|
This machine receives the product from the dry earth remover (where necessary) and carries out a final washing in preparation for the machine which follows: the centrifugal destoner. The special longitudinal showers and remixing of the product, reduce the water consumption to a minimum.
Design features:
- hot galvanized steel structure
- washing drum in AISI 304 st. st.
- longitudinal washing showers
- drive with motoreducer
|
|
Rotary drum machines (or Archimedes's screw) work with water solutions and particularly suitable for the treatment of all those items of little-mid dimensions, not so delicate, which require degreasing, rinsing and drying. Pieces are bulked loaded into the hopper (manually or through opportune device) so to arrive to the rotary drum conveyor for the treatment phases whereas the warm cleaner is sprayed violently through spraying nozzles opportunely positioned.
After the degreasing phase and chips removal during which contaminating substances are removed items go through a neutral zone for draining before being rinsed and/or passivated and finally dried with hot recirculated air.
|
|
All our spill pallets, racks and mounts are manufactured with rotomoulding in a single HDPE piece, UV treated, with ISO 9002 certificate for food industry and compatible to a large number of chemicals.
They are stackable when empty and are provided with removable plastic grid for easy cleaning.
Safe, resistant, efficient, long-life and user friendly.
Our nice shape spill pallets are yellow painted with following advantages: to call attention avoiding accidental bumps and easy identification of drum leakages.
|
|
Pallet made of a completely angled sheet blank.
Run-in from all 4 sides with fork-lift trucks and hand lift trucks.
Suitable for one 200-litre drum.
Can be stacked when empty.
Dimensions: 586 x 586 x 130 mm
Run-in height on all sides: 100 mm
Weight: 5.5 kg +/- 10%
Load-bearing capacity: 400 kg
|
|
Main features :
- 100% recyclable stackable pallet
- Reusable pallet with long service life
- Economic, environmental and efficient alternative to wood pallets or skids
- One-piece drum pallet features four molded-in rings to secure 55 gallon drums during transportation
- Now available in fire retardant material. Approved by Factory Mutual as meeting fire requirements equivalent to wood pallets. (FM)
- Underside rings for secure double stacking
- Pallets fit side by side in standard trailers
- Ideal for use in pharmacuetical and chemical applications
- Fork Truck Entry: 4-way
- Pallet Options: Hot stamp, molded-in logo, ID plates
|
|
Vat of retention in PEHD high density treated anti UV with galvanized steel grating which can be protected by the epoxy one.
Very resistant, this vat and these pallets make it possible to store to barrels of 200 liters.
Without maintenance, the PEHD resists the majority of the corrosive substances.
Manutentionnable by lifting truck or transpallet.
Possible storage of barrels of 200L without grating thanks to its interior forms.
|
|
Vat of retention in PEHD high density treated anti UV with galvanized steel grating which can be protected by the epoxy one.
Very resistant, this vat and these pallets make it possible to store to barrels of 200 liters.
Without maintenance, the PEHD resists the majority of the corrosive substances.
Manutentionnable by lifting truck or transpallet.
Possible storage of barrels of 200L without grating thanks to its interior forms.
|
|
A range of products is available that has particularly been designed to meet your requirements on gravimetric filling of containers from 1 kg to 3,000 kg. You can choose from a variety of semi-automatic and fully automatic filling machines. We can offer complete systems for fully automatic packaging processes through the combination of filling equipment with our conveyor and palletising system.
Vacuum palletiser for drums type FP-VH.
A gripper with vacuum pads lifts rows of filled drums from the roller conveyor, moves them over the pallet and places them down according to the pallet arrangement scheme.
|
|
The system PM 6 allows the automatic palletisation of filled cans at high level infeed with a magnetic pick-up head.
MACHINE MODEL PRODUCT DIMENSION MAX OUTPUT cpm
PM 6 Cans Min Ø45 mm 1500
PM 6 Cans Max Ø175 mm 450
|
|
The system PDM4 allows the palletisation and depalletisation of filled cans with a magnetic pick-up head and stationary pallet
MACHINE MODEL PRODUCT DIMENSION MAX OUTPUT cpm
PDM4 Cans Min Ø45 mm 900
PDM4 Cans Max Ø175 mm 250
|
|
The system APC50 HS allows the pusher palletisation of empty cans with movable pallet
MACHINE MODEL PRODUCT DIMENSION MAX OUTPUT cpm
APC 50 HS Cans Min Ø 65 mm 1700
APC 50 HS Cans Max Ø 155 mm 280
|
|
Drum crusher
Orwak 2500 DC is a drum crusher that can crush up to 60 drums per hour with any drained liquid collected for disposal.
Orwak 3210 DC is a combined baler and drum press that collects any residual drained liquid for disposal.
|
|
FP 200
The barrel press FP 200 compacts barrels. The sturdy steel construction is equipped with reinforcements for long-life. Easy and safety handling is self-evident.
|
|
Air-Operated Can Press for pressing cans of up to 30 litres:
• No Oil
• No electrical parts
• Safe & easy to use
• Easy to clean
• Takes up very little space
|
|
EK 800 - compactly and strongly
With pressing forces of 60 kN (6 t) and 100 kN (10 t) is the EK 800 a compact power pack. Bale weights with up to 80 kg are possible.
Equipped as standard with the press plate guiding TopPlus® and the optional available hydraulic ejector BaleMatic® are several bales none problem.
|
|
|
|