|
|
Vehicle Lifts
Most people want their vehicles to hug the road. But in some very special cases, people want their vehicles to go off road, onto a lift and then upwards and/or downwards.
Special applications for lifting vehicles of all sizes are becoming commonplace for Pflow's engineers. We have customized and manufactured Vehicle Lifts that are installed in robotic parking garages, funeral homes motorcycle dealerships, lake homes, townhouses and more.
|
|
TwinRam VH - Fully hydraulic Two-Ram-Lifts
JAB engineers have always redefined the state-of-the-art-technology. One example is the TwinRam, whose perfect concept has now been taken new TwinRam-family
Our new developed fully hydraulic 2-Ram-Lift has special installation conditions. This lift has a fully hydraulic synchronisation system, therefore no cross bar is required any longer (patent pending).
No longer a big foundation cassette is required for this lift. Both individual lifting rams are installated in HDPE-plastic pipes. So a fast and smooth installation can be performed within shortest time.
Installation of this lift is recommended for difficult soil conditions and/or high water table situations.
Our new TwinRam VH is robust enough to brave these requirements.
TwinRam VH-lifts are available in standard version as well as in telescopic version
|
|
Tipper™ Forklift Service Lift - Tilts Forklifts 90 Degrees
Fast Safe and Easy Forklift Maintenance.
This revolutionary machine tilts forklifts a full 90°, thereby offering unobstructed access to the entire vehicle underbody. Just drive the vehicle onto the Tipper™ service lift, and let the Tipper™ do the rest.
Capacity: 13,000 # G.V.W @ 54" tread width
Length clear: 85-1/2"
Length overall: 178"
Width clear: 65-1/2"
Width overall: 89-1/2" (closed working)
Maximum tilt angle: 90°
Height overall: 103" tipped, 61-1/2" not tipped
Power: 230/460/3/60, 3 hp
Shipping weight: 6,500#
Automatic safety locks
Electrical safety interlock system
Lockable control panel
Safety release handle
Shipped assembled and factory tested
|
|
The motorcycle lift MBS is equipped with a very quiet electro-hydraulic drive operated by a hand-held push button control unit featuring a "dead-mans" control function.
The working height is fully adjustable up to a maximum of 980mm. A solenoid check valve directly on the cylinder provides maximum safety in the event of sudden pressure loss.
The lifting mechanism is fitted with maintenance free bushes. The platform is made from 4mm thick, plastic coated ribbed plate and features a stop on the stirn and a wheel cut-out at the rear.
The motorcycle lift can be fitted with a transport system (supplied as an extra which lifts the mechanism onto wheels when fully lowered to allow it to be easily moved around the workshop).
|
|
KF = standard foldable lift 4 cylinder
KFL = foldable with only 2 lift cylinders (previous: HFL)
KLF = light foldable (4-cylinder)
KFN = standard foldable 4 cylinder for refrigerated vehicles.
Types
- 1000 KF
- 1000 KFL
- 1000 KLF
- 1000 KFN
- 1500 KF
- 1500 KFL
- 1500 KLF
- 1500 KLFN
- 1500 KFN
- 2000 KF
|
|
|
Robust, lightweight, folding, aluminium platform, 1430mm deep, with automatic roll stops. Extra large heavy duty platform option 1720mm deep. Platform drops below vehicle floor level in folded position for dock loading. 17.5+ tonne gvw box bodies fitted with roller shutters
|
|
KUZ= retractable ( single fold )
KLUZ = light version, retractable
KUZF = retractable ( two folds )
KUZK = retractable for short coupling systems
Types
- 750 KUZ
- 1000 KUZ
- 1500 KLUZ
- 1500 KUZ
- 2000 KUZ
- 2500 KUZ
- 3000 KUZ
- 1000 KUZF
- 1500 KUZF
- 2000 KUZF
- 2000 KUZF (BDF)
- 1500 KUZK
- 2000 KUZK
|
|
K = standard
KL = light version
KS (> 1500 kg) = short overhang
KS (750 kg) = small system dimension
KB (750 kg) = wide system dimension
KV = vertical decent (standard / foldable)
Types
- 500 K
- 500 minifix
- 500 cityfix
- 750 duo
- 750 K
- 750 KS (P)
- 750 KB
- 750 KV
- 1000 ATHLET
- 1000 K
- 1500 KL
- 1500 K
- 1500 KS
- 1500 KV
- 2000 K
- 2000 KS
- 2000 KV
- 2500 K
- 3000 K
|
|
|
The 1000 KFN has been developed especially for refrigerated vehicles. A specially designed lift arm mechanism eliminates the need to cut into the insulated flooring in order to fit the tail lift.
|
|
GOODS-LIFT / TRANSFER OF LEVEL
A range of elevators with columns lift designed "made-to-measure" according to various specifications, allow the vertical transfer of all kind of charges
- without embarked personnel - between several levels.
Those goods-lift with columns have to be imperatively embedded in built concrete shafts or in metallic cages with plain walls and doors equipped with electro-mechanical interlocks.
Goods-lift with columns are particularly suitable for the optimization of production and storage areas.
Main options : high lifting speed, platform and casing in stainless steel, hot deep galvanization.
FOR ANY SPECIFIC REQUEST, CONSULT US.
Fields of application :
Changing of levels in a processing line. Storage of itemson pallets or other equipment in warehouse... in any field of production and manufacturing.
|
|
|
|
|
|
EH Series Twin Column Workstations
EH Series dual column workstations combine the versatility of full rotation and positioning with heavy-duty lifting power. Vertical movement is driven by an electric/hydraulic pump-chain design with a carriage riding up and down on linear rails bolted to the dual columns.
An articulating arm is capable of full rotation on an axis parallel to the floor. Lineal translational movement along the arm can also be provided. The entire unit can be rotated manually or electrically along the base in order to allow the workstation to interface with other devices in different positions.
EH Series dual column workstations are ideal for systems integration (also available through Unidex). Multiple units can be used to create a complete production line. When a number of heavy components become part of the final product, they can be sequentially added if the base of the assembly is mounted to a transport trolley so it moves from workstation to holding track workstation. Unidex manipulators can be used to lift mating pieces into position.
|
|
Column lifts are particularly useful in situations where conventional lifting tables cannot be used due to there mechanical design. A lift of up to 5000mm can be achieved independent of the platform size. The column lift can be used in many situations due to the many differing design possibilities.
Platforms can be delivered in the following types: Anti-slip coating, tear plate, roller conveyor, prism, turntable, roller bearing conveyor.
Available accessories: railing, loading plate.
|
|
Application : Specific inox chain system to lift radioactive loads
Location : Nuclear Industry
Force ( kg ) : 3400
Speed ( mm / s ) : 35
Stroke : ( mm ) 2785
Product in use : A special inox Chain 60D
|
|
Mobile lifting/tilting devices have four wheels, two of which pivot and two others which are fixed. They also come with separate motorisation equipment, a separate control panel and a 3 kw motor, as well as with appropriate jacks which are able to lift up to 500 Kg.
Various kinds of forks are available: DIN, male, double male, AFNOR or may be designed and specified by the client.
Robust piping and netting offer side protection while still allowing the operator optimum visibility, even on the sides. An electric eye/ photocell guarantees front protection. In no way, not even by accident, will the machine function if the operator or any other person is within the rotating area.
If the lifting/tilting device is joined with either an electric roll on and off compactor or a stationary compactor, an extra control unit will be mounted on it, so that the operator will have the commands on hand at the front of the dumper.
|
|
The economical solution for up to 8 point synchronous lifting!
• Multiple lift point capability, from 2 to 8 points
• Digital control of the lifting process accurate to 1,0 mm,
between leading and lagging lifting points, or different
depending on the application
• 700 bar operating pressure, allowing full cylinder
capacities with standard Enerpac hydraulic components
• For use with standard single- or double-acting cylinders
• Controls unevenly distributed loads as well as various
cylinder capacities
• Automatic stop at pre-set stroke limit
• PLC-controller with touch key panel in IP65 enclosure
• Stroke control in all hydraulic circuits
• Real time display of relative stroke and ∆ stroke
|
|
|
|
|
|
The TCA-DE is a front line fully automatic split wheel bin lift with the following key features;
- Efficiency, fast automatic cycle time of 8 sec. plus dwell time, which can be adjusted between 0,5-3 seconds.
- Trade containers, at the turn of a switch the TCA-DE can be changed over into manual 'trade' mode to lift the full range of four wheeled containers including Paladin bins fitted with conversion bars, cycle time manual trade 13 sec.
- Low weight, the TCA-DE weighs only 695 kg.
- Safety, the unique Terberg geometry means that containers do not kick back towards operators as they are lifted, enabling that the safety arms whilst conforming to EN1501.1 to be user friendly and unobtrusive.
- Practical operation, exceptional ground clearance coupled with automatic reverse raise means that the TCA-DE is an invulnerable to damage as it is possible to be.
- Automatic Shaker, an adjustable automatic bin shaker allows 'sticky' materials suchs as grass cuttings to be handled with ease.
- Packing Cycle Delay Control, to take full advantage of the high mounting height and subsequent increase hopper volume, the TCA-DE can be pre set to cycle after a set number of bin lift cycles.
- Diagnostics, a text display is mounted in a durable box on the side of each bin lift to provide simple fault diagnosis in order to minimise down time.
|
|
The MAXX-ERGO-LIFTER is a highly maneuverable light capacity lifter designed for multiple material handling applications. It is equipped with a standard platform and has a load capacity of 330 lbs.
Ideal for assembly operations, ergonomic applications and other material handling needs. The MAXX-ERGO-LIFTER features a lift/lower button on a flexible control cord that allows the operator to be in the most comfortable position while lifting or lowering loads. The electric lift is battery operated and features an on board charger that runs on 110 volt input.
Also available are several optional attachments that customize the unit for specific applications including roll and coil handling attachments and a tote lifter attachment that are bolted on permitting the unit to be changed back to the standard platform when required.
|
|
|
|
|
|
The MAX-UPENDER series is ideally suited for tipping loads up to 90 degrees. Available with capacities of 2,000 to 6,000 lbs. and a variety of standard platform sizes. The MAX-UPENDER is also available custom built for those special handling requirements. Designs of open frame, v-block, split platform and special sizes are just a few of our custom capabilities.
Features:
* 1 1/2 HP motor. 115/230 volt single phase or 230/460 three phase voltage. Motor is internally mounted on most models.
* Push button magnetic back control box is standard with 6' cord.
* 10' power cord is standard.
* Hydraulic gear pump with check valve, solenoid valve, filter and velocity fuse is standard.
* Tilt limit switch.
* Control box includes magnetic starter transformer, thermal overload and fuses.
* Designed for surface mount or lift table mounting.
* Powered up and down 90 degree tilt.
Options:
* Foot control switch
* Lowering beeper
* Remote power unit
* Accordion bellows safety skirting
* Special color
* Adjustable tilt limit switch
* Raised base
|
|
1. Designed for vertical plate lifting.
2. Positive grip c/w locking mechanism.
3. Hardened steel knurled cam ensures maximum grip and hold.
4. Easy to replace wear parts.
5. Minimum maintenance.
|
|
|
|
|
|
Applications:
You can use H-LIFT permanent magnets as load handling magnets at various workplaces - in production and assembly areas or outdoors. We offer 7 sizes with load capacities from 100 kg to 6000 kg which you can use for both round and flat material in your applications.
Benefits
Low operating costs
High level of safety and reliability
No residual magnetism
Independent of the mains supply for use anywhere
Lever control with integrated safety feature to prevent accidental switch-off
Require little maintenance
Operating principle / Technical details:
H-LIFT permanent magnets operate independently of a power supply. Due to the specific arrangement of a group of permanent magnets, the magnet field lines act on the magnet pole and the load, or are deflected in the magnet housing so that the poles are not magnetised. In position "ON", the magnetic field lines are guided via the poles through the load. The magnet is active. In position "OFF", the magnet pole surfaces are neutral and the magnet is therefore switched off. The load lifting magnet consists of individual standardized components. The inside of the magnet comprises the actual magnet system consisting of a reversing magnet system, the magnet assembly and the magnet poles.
|
|
Use these pneumatic tilters anywhere that shop air is available. They require no electrical power and because they use no hydraulic fluid there is no chance of process contamination.
Features:
- 2000 - 6000 lb capacity
- 30 degree tilt standard, 35 degree tilt optional
- Air requirements 80 psi @ 15 cfm
- Pedestal mounted control standard
- Foot control available
- Optional floor stand
- Safety restraining chain to guard against over tilt
- Optional fork pockets
- Lifetime warranty on Firestone Actuator
- Optional motion stabilizer
- Custom designs available
|
|
| ... products without technical information |
| |
|
|
