|
|
PRONAL has developed a new range of membranes made with reinforced or non-reinforced polyurethane material, designed for low inflation pressure from 0.01 bar. These membranes combine flexibility, elasticity and minimal overall dimensions.
Numerous models in various shapes and dimensions are offered to satisfy many diverse applications.
|
|
Vacuum made to measure, perfectly controlled:
Reliable FIPA components: day or night, even for continuous production.
Vacuum lifting cylinders with strokes 5 mm – 50 mm
|
|
Inflatable Thrustors
Pressing- Lifting - Gripping - Guiding - Dampening - Handling...
Mustpress lifting bags are adapted to any industrial equipment and usually replace hydraulic and mechanical jacks. They are made of elastomer coated fabrics and supprt high inflation pressure (up to 100 bars).
Available in different shapes and dimensions (square, round, rectangular, toric). In order to increase their thrust, they are available with 2 or 3 stages.
Mustpress is inflated with air, oil or water.
|
|
We have three different sizes with non-twisting piston rod for positionally accurate lifting of workpieces.
Uses of lifting cylinders:
Lifting and stacking a great variety of flat workpieces ( for example cardboard, veneer, wood, glass and metal sheets)
Separating sheets of paper and plastic foil
Removing parts from injection-molding dies
Printing, packaging and CD/DVD industries are preferable fields of application
Also we have two sizes without non-twisting feature. Lifting pistons with double slideways permit brief cycles times and good holding forces even in the case of lateral forces.
|
|
|
A whole range of hydraulic actuating cylinders, pumps manual or motorized, two ranges of hydraulic presses, hydraulic ranges of tools: hydraulic extractors, tear off-hubs, crichs, jacks with shoe,...
|
|
• High precision load maneuvering, vertically and horizontally – using
one crane
• Eliminates the risk of damage from oscillations of wire rope due to
sudden crane starts/stops
• Vastly improving operating speed and worker safety
• Weather conditions play less critical role
• Intelligent hydraulics turn lifting into high accuracy hoisting and load
positioning system
• High accuracy (+/- 1,0 mm)
• 700 bar double-acting push/pull cylinders with parachute valves for
added safety in case of hose rupture or coupler damage
• Cost reduction when compared to conventional load positioning
methods
Three options for system management & control:
• Manual control: stroke control and system warning functions
• Extended manual control: stroke control, load and stroke display and
system warning functions
• PLC-control: fully monitorized system with programmable functions
using touch screen and wireless remote control and system warning
functions
|
|
Located in the north of France, SP2i is specialize in the design and the manufacture of lifting and handling tools for all type of heavy loads.
Today, our experience and know-how in this field, allow us to offer you a large range of tongs adapted to your needs and to your working environment, in the respect of the standards and regulations in force, as well as your own requirements.
Even if the iron and steel sector is our main customer, we also work with the car industry, the railway industry and paper mills … too.
Our tongs are robust, reliable, and a great handiness.
A lot of options are available to satisfy your requests.
Horizontal grasp
Several Versions : mechanical, Electromechanical, Electrohydraulic
Types of loads :
- Coils,
- Flat products,
- Ingots, Slabs …
- Press Tools.
- Bars or pipes bundles …
- …
|
|
This equipment allows synchronous stage lifting and lowering operation regardless of load, with four cylinders. In case of hyperstatic operation, each cylinder is able to lift 50% of the total load.
COMPONENTS
- A hydraulic power unit with four oulets hydraulic pump
- Four double acting hydraulic cylinders equiped with a CE 06 regulation valve and a aluminium base :
* Lifting capacity per cyl : 150 Tons
* Stroke : 150 mm
- A remote controller
|
|
| ... products without technical information |
| |
The actuator is composed of a magnetic circuit with a permanent magnet creating a magnetic force in the air gap.
In this air gap moves the coil linked to the actuation shaft.
The current that circulates in the coil reacts with the magnetic field and thus generates a mechanical force which is transmitted through the actuation shaft.
This force is directly proportional to the current, in direction and intensity.
Many diametres possible :
Diametre 30
- ref AE G31 stroke 6mm
- ref AE G32 strokse 12mm
Diametre 40
- ref AE G41 stroke 6mm
- ref AE G42 stroke 12mm
Diametre 50
- ref AE G51 stroke 6mm
- ref AE G52 stroke 12mm
|
|
CVC - Circular Voice Coil Series
CVCA - Circular Voice Coil Actuator Series
- Direct drive
- Zero cogging
- Zero backlash voice coil motors
- Low coil mass with very fast reponse and high bandwidth
- Short Lead Time
- Economic Price
- Compact Size Good Cost Performance Ratio
--------------------------------------------
CVCS - Circular Voice Coil with Shaft
- Voice coil with build in bearings systems
- plug and play, no additional mechanical structure or bearings systems required
- center hollow to allow for vacuum suction
- ideal for pick and place head
- allow position, velocity, torque control
- high force (speed) small size
- optional module using stepper motor for theta adjustment
|
|
BEI Voice Coil Actuators are ideally suited for such demanding Applications as semiconductor equipment, defense systems and life-sustaining medical systems, BEI Kimco Magnetics Voice Coil Actuators are directdrive, hysteresis-free, cog-free devices offering high-acceleration and “clean” technology. They deliver infinite position sensitivity, limited only by resolution of the feedback device. These units exhibit perfectly smooth force-versus stroke characteristics. New packaging and miniaturization capabilities offer the designer added flexibility without compromise. Units can be packaged for integrated assemblies including encoder, motor, switch or other functions to streamline operations and cost.
|
|
|
The SW servo actuator family is designed for longer life and no-maintenance performance in a scissors, pinch or C-style resistance welding guns. Featuring an integrated motor this short body, compact package is designed to retrofit nearly every pneumatic fixture or robotic welding gun providing high force and fast moves. The SW actuator can be used with Tolomatic's Weld Axis™ or a robot's integral drive, providing excellent thrust control and repeatability. Factory lubricated for life with zero maintenance.
|
|
CIB
Optional controller and demonstration board for the PQ-12 actuator. Also works with the L12 -P model actuator
|
|
Driving unit for a single linear actuator or two synchronized actuators with DC motor.
Parallel motion with synchronous position.
Push rod positioning control, speed and force control.
Through highly flexible programming capabilities, it is thus possible to custom tailor the programming to the customer specific needs.
|
|
|
|
|
|
LINAK has introduced a series of different control boxes - from small control boxes suitable for operating one or two actuators to sophisticated basic control boxes with microprocessors suitable for operating six actuators.
The most simple and the most advanced control boxes
The most simple control boxes are only able to convert control signals from the handset into operating voltage for the actuator whereas the most advanced control boxes have functions such as parallel running of several actuators and memory drive. Moreover, the most advanced control boxes are those controlled by microprocessors. These can be delivered with customised software.
Furthermore, some control boxes are designed for connection to the mains, for example, mains voltage of 100, 120 or 230 / 240 V AC for use in different countries; others have an internal or an external battery. Versions with both battery and mains are available too.
Safety features
Most LINAK control boxes are designed to provide Electronic Overload Protection (EOP). This means that it protects the actuator against overload by disconnecting the current when the actuator is fully extended or retracted or if an overload occurs during operation. The control boxes are also designed so that they will short-circuit the motor terminals (poles) when the actuators are not running. This solution gives the actuator a higher self-locking ability.
|
|
The controls are the units used when you want the LINAK system to perform a movement. They determine whether the control box make the actuator move in or out. There are more variants of LINAK controls such as handsets, Foot Switches, Desk Panels and attendant control panels.
All the handsets are available in both black and grey.
|
|
The UltraSensor has been designed as a next generation replacement of Proximity and Micro switch systems for monitoring spool movement in progressive divider elements.
A single model will work with all standard SMX and SMP divider blocks as a screw-on accessory without requiring special arrangement or modification to the spool.
The patented concept works by monitoring magnetic flux variations through a hall-effect sensor as the spool enters the sensing range. There are no moving parts which means the solid state device is completely wear free.
NPN and PNP connection options are standard within the same sensor.
|
|
Designed specifically for use in hydraulic and pneumatic actuator
applications, where the transducer is fitted inside the pressurised
environment. Can operate at pressures of 670 Bar and temperatures of +200C.
Seperate electronics module operates from 10-60Vdc.
Available in a choice of mounting styles (Internal or External), these
transducers can be supplied to suit actuator strokes up to 2000mm.
|
|
Designed specifically for use in hydraulic and pneumatic actuator applications, where the sensor is fitted inside the pressurised environment.
Available in a choice of two mounting styles (Internal or External), these sensors can be supplied in lengths to suit actuator strokes up to 1100mm.
|
|
WaveScale Linear Displacement Transducers are an enhancement of the Series 2HX Electrohydraulic Actuators. Cylinders with the WaveScale meet standard NFPA heavy duty hydraulic cylinder dimensions, 2” to 6” bore with a male piston rod end. The main advantage is no false stage is required for cap mounts. The overall length of the cylinder is not increased!
3000 PSI Operating Pressure
Non-Linearity: ±0.02% of cylinder stroke or
±0.004 inch, whichever is greater.
Repeatability: Equal to resolution
Input Voltage: +24 VDC
Standard Operating Temperature: -40° F to 185° F.
Cylinder Stroke Length: Up to 100 inches.
Multiple Output: Analog - Voltage or Current
Digital - Start/Stop or PWM
|
|
| ... products without technical information |
| |
Spring Engaged, Rod Lock, For ISO Pneumatic Cylinders
Model RLSS 040-016-S-A
Rod Size: 16 mm
Holding Force: 890 N
Model RLSS 125-032-S-N
Rod Size: 32 mm
Holding Force: 8560 N
|
|
| ... products without technical information |
| |
Linear Cylinder Type Hexagon Torque Wrench
Torque Capacity up to 21,180 Nm, Hexagon Cassettes A/F sizes 32mm to 130mm, Maximum Working Pressure 700 Bar.
Double Acting Cylinder.
Linear Power Head - flat & sleek,suitable to exchangeable cassette with one way ratchet mechanism.
Optional square drive cassette attachements for use with Power Head of TLC-28 and TLC-54 models.
Extra Sleek - Ultra strong, exchangeable cassette suitable to limited space.
Special high strength, ultra-light Aluminium alloy material for strength & light weight.
Very compact design with best torque to weight ratio.
Quick exchange of cassettes without using any tools.
360° revolving hose connections.
Torque precision ± 3%
|
|
|
|
see the results for the following category : 
