|
|
- The cell is manufactured in aluminium alloy with HT steel bushes.
- The cell incorporates an eight gauge bridge together with
associated electronics and a 9 volt PP3 non-rechargeable battery.
- Built into the load cell is a large [20mm] 3.5 digit liquid crystal
display mounted on the front of the cell for easy reading from
the operator's position.
- The load cell is self contained and has no external cabling.
- A battery switch is provided on the rear of the cell to prolong
battery life when the cell is out of use.
- All set up and calibration data is retained when switched off.
- The cell is automatically switched off after 15 minutes to
prolong battery life.
- Battery life - typically 50 hours. |
|
Warning: Models HTS with Max >= 3.000 kg only available on pallet
10 tare memory units, 10 unassigned memory units, e.g. for weight increments or identification numbers, summation storage, adds up all individual weighing processes (TOTAL)
Charge condition indicator for rechargeable battery, visual by means of LED
Adjustment program CAL. External test weights available at an additional price
Rechargeable battery pack internal, standard. Operating time approx. 150 h, charging time approx. 15 h. Models until incl. Max = 1.500 kg internal, through mains adapter, For models from Max = 3.000 kg external. Batteries can be reordered at any time
Luminescent LED display. The intensity can be adjusted in 2 stages to preserve the battery. Models with Max until 1.500 kg incl., digit height 25 mm, with Max from 3.000 kg, digit height 30 mm
Infrared remote control standard. Range approx. 15 m. All functions are selectable. Input via numeric key pad, incl. protective case WxDxH 200x80x28 mm, batteries Size AA (2 x 1,5 V) included
Hook with safety catch, revolving
Standby function. Automatic switch-off of the display after 5 min without a change of load. Reactivation of unit with the touch of a key |
|
Around the world, cranes are used to load ships, vehicles and containers. Casting and charging cranes handle material flows in foundries and steelworks. These materials must be frequently, reliably and accurately weighed, and without any delay.
Schenck Process supplies the perfect solution: electromechanical crane scale systems for all required classes of accuracy, customised for specific projects and applications, from systematically planned standard solutions through to customised design. |
|
Chatillon crane scales and dynamometers deliver optimum performance for weighing tension, traction and weight. We offer mechanical and digital readout scales that are ideal for industrial applications, warehouses, shipyards, terminals, etc.
|
|
- A compact measuring device for weighing loads during lifting.
- Appropriate tackle can be attached to assist in the lifting and weighing.
- The crane weighters have a liquid crystal display(LCD),which can tare as well as show either the gross or net loads.
- It also indicates the load protection at 110% of the gross weight and the status of the battery.
- Conforms to CE safety standard. |
|
| ... products without technical information |
| |
Characteristics
Absolute measuring system with sensor retaining carriage.
Type LT-S
Measuring range 140 - 3040 mm
Resolution (max.) programmable 0,1 µm
Accuracy (typ.) +/- 5µm
Characteristics
Compact absolute measuring system with rod to push.
Type LT-G
Measuring range 60, 100 mm
Resolution (max.) programmable 0,1 µm
Accuracy (typ.) +/- 5µm
Characteristics
Solid absolute measuring system with rod to push.
Type LT-PI
Measuring range 100, 200 mm
Resolution (max.) programmable 0,1 µm
Accuracy (typ.) +/- 5µm |
|
Company COMPAUT offers a broad range of rules and meters of quality.
The majority of this whole of visualization can be delivered in 24:00
Among these rules, many models are perfectly compatible, as well mechanically as electrically, with the principal standards of the market.
You can thus come to replace those which you usually use, without same having to change the connectors, the whole for a price without comparison.
In addition, company COMPAUT points out that it carries out in its workshops the repair of the meters and the rules, some is the mark, and this within very short times.
N’ thus do not hesitate to entrust to us your defective products for a free estimate. |
|
Highest quality in most compact form, that is that
SENC 50 of ACU RITE.
The small dimensions and the high accuracies of this taper roller bearingled top illumination measuring system are ideal conditions for the employment in the measuring technique.
* Compact dimensions
* Dissolutions of 0,5 µm to 5 µm
* TTL and similar signals
* Measuring lengths from 50 mm to 525 mm
* Coded reference marks -
Position Trac
|
|
The POSIMAG length measuring system comprises an MR scanning head and a magnetic dimensional scale. The position is determined without contact and thus without wear or tear. This measuring setup supports resolutions in the µm range.
POSIMAG is suitable for linear, angluar and speed measurements.
Technical advantages:
Sturdy construction, contact-free and wear-free, shielded metal housing, protection category up to IP67, signal processing as standard with encoders, distance between the MR sensor head and the magentic strip up to 2 mm, measuring lengths of up to 30,000 mm.
Thanks to its special properties, POSIMAG is ideal for many industrial applications in the production of machinery, plants and precision equipment as well as research. For example: Metal and wood processing, manual tasks in handling systems, positional checks for linear units, quality-control systems for sheet metal, punches and presses.
|
|
|
|
see the results for the following category
