|
|
BAT GRIP
3 Ton capacity permanent-electro lifters with battery.
Equipped with a remote control, this lifter is capable to be used for a long period independent of the power supply (est 7
days), because the energy is only used for a fraction of a second during the MAG/DEMAG phase.
|
|
Magnetic Lifters
WALKER MAGNETICS lifter's range is typically dedicated to flat and cylindrical workpieces.
|
|
Features:
Cold Operation
Since the electrical current is only used momentarily, no insulation or coil failures are caused by internal heating.
Safer Holding
The permanent magnetic material is unaffected by external power failure. Since Electro-Permanent magnets require electricity only to activate the magnet "on" or "off", there are no mechanical parts that could accidentally stick. Once the magnet is "on" the electricity can be disconnected indefinitely without any interruption to the holding power.
Cycle Time
Energizing the magnetic material typically takes 2-3 seconds.
Power Consumption
Operating costs are very low compared to conventional electromagnets because the power is applied for a minimal time.
|
|
RD modules for rounds:
Permanent-electro magnetic modules for rounds handling.
The special shape allows to easily clamp loads with curve surfaces.
CO / CV modules for coils handling:
Permanent-electro magnetic modules for coils handling, even in vertical or horizontal eye.
Special equipments for full-automatic lines.
|
|
LONGITUDINAL ELECTRO LIFTING MAGNETS
These magnets are used to lift bundles of material with an irregular surface, which complicates lifting operations. Longitudinal magnets, however, have a particularly deep penetration field that makes them unsusceptible to such irregularities. This enable safe and effortless transport of bundles of material. Moreover, two or more of these magnets can be used, depending on the length of the bundles. In the event that people are present in the lifting area, however, extra mechanical slings must be fitted for safety purposes.
|
|
The MAXX-ERGO-LIFTER is a highly maneuverable light capacity lifter designed for multiple material handling applications. It is equipped with a standard platform and has a load capacity of 330 lbs.
Ideal for assembly operations, ergonomic applications and other material handling needs. The MAXX-ERGO-LIFTER features a lift/lower button on a flexible control cord that allows the operator to be in the most comfortable position while lifting or lowering loads. The electric lift is battery operated and features an on board charger that runs on 110 volt input.
Also available are several optional attachments that customize the unit for specific applications including roll and coil handling attachments and a tote lifter attachment that are bolted on permitting the unit to be changed back to the standard platform when required.
|
|
BATTERY OPERATED ELECTRO LIFTING MAGNETS
In the event that you wish to transport workpieces over, without access to a mains power supply, then battery-powered lifting magnets may be the solution. Your workpiece can be transferred from crane to crane or from one forklift truck to another without the load being dropped. The magnets are powered by a battery. Controls are fitted to the magnet for easy operation. The battery-powered magnet is available with a lifting capacity of up to 1000 kg. These magnets can also be equiped with wireless remote control.
|
|
Since 1960, BWG has supplied conveying systems for hot rolled and cold rolled coils for the steel, stainless steel and non-ferrous metal industries. Hot and cold coils up to aluminum qualities for lithographic applications are reliably and carefully fed into and discharged from the production process.
BWG's sophisticated designs together with a high level of automation guarantee for shortest cycle times, high availability and low maintenance costs.
|
|
|
This 50-metric ton capacity transfer car can transport two 25-metric ton coils. Replaceable wear pads protect the coil surface. The operator walks along with car, operating it from a hand-held pendant.
|
|
Minster Coil Cars Standard Features
• Safe, Reliable Way to Handle Coils
• Enables Pre-Staging of Coils
• Heavy Duty Fabricared Frame and Running Gear
• Mechanical Screw Jack Lift Mechanism
• Rigid Coil Car Track
• Coil Restraints
• Hydraulically Driven
• Controls Integrated into the Minster Straightener
• Machine Guarding
|
|
Located in the north of France, SP2i is specialize in the design and the manufacture of lifting and handling tools for all type of heavy loads.
Today, our experience and know-how in this field, allow us to offer you a large range of tongs adapted to your needs and to your working environment, in the respect of the standards and regulations in force, as well as your own requirements.
Even if the iron and steel sector is our main customer, we also work with the car industry, the railway industry and paper mills … too.
Our tongs are robust, reliable, and a great handiness.
A lot of options are available to satisfy your requests.
In horizontal or vertical Axis
Several versions : Mechanical, Electromechanical, Electrohydraulic
Alternatives : C-hook… Lifting beams …
Types of loads :
- Rolls Mills,
- Flat products,
- Ingots, Slabs …
- Press Tools.
- Bars or pipes bundles …
- …
|
|
Bushman AvonTec manufactures a complete line of coil brabs that have been engineered to meet a variety of dimensional, capacity and special application needs. Quality-built throughout, these lifters will provide years of continuous, safe, efficient coil handling.
Bushman AvonTec manufactures coil grabs with heavy steel weldments to protect the integrity of the coil. They feature:
- Telescoping, motor-driven legs.
- Formed, curved saddles on the lifting surfaces.
- Limit switch in the lifting pad to prevent accidental opening under load.
|
|
Electropermanent magnets utilize permanent magnetic material surrounded by an electrically powered coil. To energize an electropermanent magnet, a momentary pulse of D. C. power is applied to the magnet's coil in order to charge the permanent magnetic material within. Once energized, the electropermanent magnet does not require a constant source of power to retain the lifted steel coil. To release the steel coil, a reverse pulse of D. C. power is applied to the magnet's coil. The Electropermanent magnet design tends to excel when the steel coil's edge stagger is kept to a minimum.
Special Adaptations (Standard Circular, Rectangular, and Bi-Polar)
Able to prevent "telescoping"
Less storage space required
Transport requires less manpower
|
|
| ... products without technical information |
| |
Output inverter choke
Class F insulation system
Application :
UPS from 10kW up to 200kW
Gamme :
Inductance value from 10uH up to 2mH
Current range from 15A up to 200A
|
|
PV inverter choke
Application :
PV inverter from 2kW up to 30kW
Gamme :
Current range from 5A up to 50A
|
|
Three-phase and neutral line filters are a compact solution for the interference suppression on the mains input of cabinets and control units of equipment, ranging from industrial applications like machine tools to sensitive medical installations. These typically involve separate and often
insufficiently filtered frequency inverters and SMPS, causing current imbalance and significant interference problems. As individual elements they may be interference-suppressed already. The conjunction of several switching components in the same cabinet and a non-EMC conscious cabling will rise the demand for an additional EMC filter on the mains input of the whole installation. Many times this is the only way to get the CE mark for the cabinet in accordance with the EMC directive.
|
|
|
Providing both quality products and experience the IBK DIVISION of REO INDUCTIVE COMPONENTS manufactures a comprehensive range of chokes, from the very smallest to the highest inductance with various current ratings. REO has a number of automatic winding machines and hand-winding facilities thus we are always able to offer the most appropriate solution. All products are manufactured in our own plants located in Germany and are 100% tested in our own laboratory, which ensures that we always provide the highest level of quality. Whether it is braid windings or encapsulated construction, single or three-phase AC that is required, we can offer the best selection of materials to ensure conformance of our customer's products. REO also produces toroidal components in any type of configuration.
|
|
The conventional output-choke has a very good storage capacity. It functions like a typical series inductance and smoothes the symmetrical, effective current and the asymmetrical, parasitic current. The voltage rise is limited to less than 500 V/µs. The line to line voltage peaks at the motor terminals are lower than 1000 V. This solution attenuates the cable-conducted disturbance really well, even in the lower frequency range. The electromagnetic radiation from cables is attenuated considerably. Losses and typical motor noise, caused by harmonics, are reduced.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
