|
|
- AUTOMATIC OVERHEIGHT FRAME
VERSIONS: 20 ', 40' and TELESCOPIC
TRIPLE SECURITY SYSTEM USING SENSORS AND LIGHT SIGNALS
FULLY ELECTRO-MECHANICAL SYSTEM
- OPENING AND LOCKING DEVICE POWERED DIRECTLY FROM CABIN.
- PLC PROGRAMED
- Low battery indicator
- MINIMUM NEEDS AND EASE OF MAINTENANCE
- ADDS ITS OWN BATTERY CHARGER
- GUARANTEED TO MARINE ENVIRONMENT
ALL VERSIONS ARE DEMOUNTABLE FRO STANDARD TRANSPORT
SPECIFICATIONS
- STRUCTURE IN FULL S355J2+N
- F-1252 ON CONES
- SENSORS PROTECTION IP67
- ELECTRIC COMPONENETS PROTECTED IP67 STAINLESS
- MAXIMUM PROTECTION FOR THE MARINE ENVIRONMENT
|
|
- LIGHT SPREADER FOR ISO CONTAINER HANDLING
- OPEN / LOCK DEVICE IS FULLY AUTOMATIC
- WIRES INCLUDED
- DESIGN APPROVED BY GL
- AVAILABLE WITH GL / BV INSPECTION CERTIFICATE
- VERSIONS : 20' y 40'
- FULLY MANUAL VERSION ALSO AVAILABLE
TARE: 1000KG
Material: STRUCTURAL STEEL
SWL : UNDER CUSTOMER REQUIREMENT (UP TO 40T)
FINISHED : SANDBLASTED + SHOPRIMER + PINTED
- OPTIONS:
CORNER GUIDES
FORKLIFT POCKETS
|
|
|
|
|
|
Specialised lifting systems for mobile devices
Our Lifting supports are modular in design, so that low-cost solutions are available for your specific requirements.
Depending on the application of the supports, the following technical parameters can be achieved: Container carrying capacity from 2.5 t to 20 t, Lifting heights from 500 mm to 1,750 mm (Optional maximum: 2,000 mm), Attachment to ISO corners and Position Control.
Innovative inclinometer-based position control is a special characteristic of our lifting systems and allows lifting and lowering action parallel to the ground during loading operations in uneven terrain, automatic initial inclination registration, inclination offset to zero degrees, control precision: +/- 0.2 degrees, safety shutdown when the inclination exceeds 3.5 degrees (or more, if required). Individual support control unit available as optional attachment.
In addition to our standard products, we offer customized designs:
Non-standard lifting heights, modified basic carrying capacity, specially adapted mounting and interlocking systems, special base plates, holding fixtures for easy lifting support transportation, tailor-made solutions with regard to functionality and intended uses, advice, assistance and support to customers implementing specific projects as well as special colours and paint coats.
Furthermore our products are accompanied by expertise and therefore offer appropriate performance in tests, trials and provision of samples. Our products are TÜV tested. Each product is subjected to functional and load tests performed on our own test equipment.
|
|
Incorporated lifting/tilting device
Incorporated lifting/tilting device with compactors or static waste compactors. These work much like separate lifting/tilting devices. When paired with roll on and off compactors, the lifting/tilting devices can be designed according to the dimensions required by highway code regulations.
|
|
|
For lowering a container from a truck, the jacks are fixed and locked to the lower ISO corners first. Via air suspension, the vehicle will be lowered, resp. the container is lifted at trucks with steel suspension, so that the truck can drive out. The container can stay on the jacks until it is picked up again. Support capacity per system 320 kN. Different version up to windforce 12 are available.
|
|
- HOOK TO TRANSFORM STANDAR FORKLIFTS INTO GENERAL CARGO CRANES.
- AVAILABLE IN A WIDE RANGE OF WORKING LOADS.
- THE STANDAR VERSION IS VALID FOR SWL UP TO 32T
- TARE = 1T
|
|
- THIS IS A BEAM, INCLUDING THE 100 T HOOK, IS DESIGNED FOR HANDLING GENERAL CARGO, SPECIALLY FOR COMPONENTS OF WIND TOWERS.
- IT IS FULLY EQUIPPED WITH WIRE ROPES THAT WORK THROUGH SHEAVE BLOCKS.
- VALID FOR SINGLE AND TWINS CRANES.
|
|
- 20' PLATFORM WITH ROTATORY HOOK.
- WITH THIS TEC DEVICE IT IS POSSIBLE TO CONVERT CONTAINER CRANES TO MULTIPURPOSE CRANES.
- THIS MODEL IS AN ESSENTIAL TOOL IN MULTIPURPOSE TERMINALS.
TARE :: 2700 Kg
SWL :: 80 Ton
|
|
|
|
|
|
- Identical Dimensions to a 20’ I.S.O container to allow Storage & Transport.
- Tare 3500 Kg
- Maximum Working Load = 6000 Kg
- 4 persons / complete working equipment (1.000 Kg)
- 2 Containers for Lashing Material (2500 kg / each)
- Maximum Weight (Tare Included) : 9500 Kg
- Double Safety System:
- Automatic: Through the Twistlocks of the spreader.
- Manual: Using a safety Quick Hook & Chain from the interior of the cage.
- Safety Railing in the Complete Perimeter and internal handhold at 150mm from outside the Safety cage.
- Completely covered Ceiling except in the corners, which remain opened to enable fitting of manual couplings of cage to the Spreader.
- Two doors, one on each side, with opening towards the interior, spring close-system and automatic locks.
- 4 ISO holes for Personnel Harnesses near Safety Cage Doors.
- Neoprene-lined hooks to place 4 actuator poles for Twistlocks.
- Top-embedded locker to maintain the Security Harnesses while not in use.
- Safety instructions in most common Languages.
- 2 storage container for Twistlocks that can be loaded and unloaded by a Fork-lift.
- 150mm high Toe Recess along the whole perimeter.
- Non-sliding floor with drain spots.
|
|
- THIS IS A 12 METERS BEAM SPECIALLY INDICATED FOR HANDLING UP TO 100 TONS OF STEEL COILS.
- IT IS ALSO SUITABLE FOR GENERAL CARGO.
|
|
- REVOLVING HOOK TO BE LIFTED WITH A FORKLIFT FOR GENERAL CARGO
- SPECIALLY DESIGNED TO HANDLE REELS.
- ALSO AVAILABLE WITH A SUPPORT TO BE STORED WHEN NOT USED.
- SWL = 30Tn IN THE STANDARD VERSION
- TARE = 2.85 Tn
|
|
| ... products without technical information |
| |
3a drum heater is a flexible panel with two coated fabrics : an heating side and an insulated side.
3a drum-heater is supplied with eyelets which, laced with an elastic rubber, lets the barrel heater lie flat on the barrel, essential condition for a good heat exchange.
In comparison with heating belts which need several main supplies and do not wrap totally the barrel, 3a barrel heater totally wraps the cylindric part of the barrel, allows smooth and homogeneous warming and, thanks to the insulated face, is maintaining temperature in the barrel for hours after you switched it off.
A utility is accessible to determine the time of heating necessary for the application.
|
|
3a IBC warmer is available with 2 different outputs:
- 3000W : a set of 4 heating flexible watertight pannels (1 heating red side and 1 insulated blue side) + 1 insulated top cover
- 1500W :a set of 2 heating flexible pannels (1 heating red side and 1 insulated blue side) and 2 insulated pflexible pannels + 1 insulated top cover.
3a IBC warmer is made of flexible pannels which you can fit together with gripping belts ; this way of gathering is good to lay heating pannels on containers, requirement necessary to get efficient heat exchange.
Avantages :
• Every of the heating parts is independant.
• Heat losses are restricted by efficiency of insulation.
• Thanks to the top cover opening, there is no need to put away the IBC warmer to fill in the container..
• A utility is available to determine the time of heating necessary for the application.
|
|
2000W: 1 heating flexible cover protected by two impregnated fabrics (a heating face and an insulated face) + 1 integrated lid
The Heater of IBC 3A allows a good application on the IBC, essential condition with a good heat exchange.
Advantages:
- One only feeding circuit
it quality of the heat insulator limits the losses and guarantees an effective and homogeneous heating,
it lid integrated into the cover, allows the filling without disassembling.
- Flaps make it possible to limit the losses under the ibc, they allow also the passage of the forks for handling.
Technical description:
Nominal nominal output: 2000 W
Standard tension: 230 V
Electric cable 3x1,5 ²: L 2m
External dimensions: 1000x4400
Color heating face: red
Color insulated face: blue
Index of protection: IP54
max. t° of maintenance (under tension): +60°C
max. t° of exposure (not under tension): +80°C
Integrated thermal protection: +80°C
|
|
Holroyd Silicone Side Drum Heaters (HSSD Belts)
• Silicone Rubber insulated
• Double insulated construction
• High temperature tolerance
• Simple spring catch Assembly
• 20c to 120c Thermostat
• 2 Metre Power cable
• Standard Sizes 25L, 50L, 105L, 200L
• Bespoke Sizes to order
• Ex-Stock
Holroyd Insulated Side Drum Heaters (HISD Jackets)
• Teflon coated polyester Jacket
• Water resistant
• Glass Filament Blanket Insulation
• Adjustable Quick release Buckles
• -5c to +40c or 0c to 90c Thermostat
• 3 Metre Power Cable
• Standard sizes 25L, 50L, 105L and 200L
• Bespoke Sizes to Order
• Double Insulation IP40
• Ex-Stock
Holroyd Base Drum Heaters (HBD)
• Robust steel construction
• Even heat over platen area
• 0-150c Thermostat
• 110 or 230 Volt Options
• 2 Metre armoured power cable
• Ex-Stock
|
|
Mica Drum Heater (GDH)
Heats low-melting-point solids in standard metal 55 gallon drums. Constructed of corrosion resistant nickel plated steel throughout. Features pilot light, infinite control switch, and 6 foot heavy duty rubber insulated cable.
|
|
|
|
|
|
HIBC/B Heater Jacket:
• Teflon/Polyester Jacket
• Dual power circuits
• Thermally insulated
• Adjustable quick release buckles
• 0-40c or 0-90c Thermostat
• Bespoke sizes to order
• 3 Metre power cable
• Double insulation IP40
• Ex-Stock
Size: 1000mm x 4400mm (3900mm Heated Length)
Rating: 110 or 230 Volts 2 circuits each 1000 watts.
Temperature Control: 0c to 40c or 0c to 90c
HIBC/A Heater Mat:
Rating: 2700 Watts 230 Volts AC
Temperature control: 20c - 90c Electronic controller (Digital readout)
The HIBC/A silicone heater mat comprises of a high temperature resistance wire element laminated between silicone/ glass sheets.
A PTC temperature sensor is also embedded between the sheets. This connects to an electronic temperature controller via the heater power cable and provides accurate measurement and fast response to temperature changes at the bottom of the IBC liner. This makes the heater suitable for both high-energy absorbing products and highly viscous, temperature sensitive materials.
|
|
In ECAS we manufacture heating blankets and heating bands, for the control and maintenance of the temperature of drums and containers.
Models BFVFV and BFVIBC: Consists on an electric flexible resistance placed in a blanket or band, manufactured with fabric of glass fiber.
All our heating blankets and bands, controls and regulates the temperature with a thermostat recommended due the requirements of each project.
We manufacture blankets and bands for drums from 25 to 200 litres, and containers IBC of 1000 litres, but we also fabricate custom blankets.
Drums: of 200,100, 50 and 25 Litres
IBC container: 1.000 Litres
Power (W):
Drums 200 L: 750 W, 1.000 W, 1.500 W
Drums 100 L: 750 W
Drums 50 L: 300 W
Drums 25 L: 200 W
IBC Container of 1.000 L: 2.000 W
Range temperature: 0 - 80 ºC
Types of fasteners: Velcro. Plastic buckles or clasps, Grommets
Application
Heating of drums, storage tanks, Instrumental of laboratory, etc.
|
|
|
Heating sleeves to heat segments of 200 litre barrels per DIN. both the inner and the outer sheath of the barrel heating sleeve are made of aluminium sheet, which ensures maximum protection of the electrical components against mechanical damage. A hinge with campling closure that divides the heating surface into two semi shells permits convenient assembly, without the heating element needing to be bent. The barrel can be heated complete by using 3 sleeves.
|
|
Insulated Flexible Heating jackets for containers and drums from 20 litres up to 1200 litres in size.
High grade insulation combined with a range of custom coated fabrics allow us to offer a performance specification from "winter warming" anti-freeze applications through to melting of solids from 200 litre drums.
Power ratings are suitable for both plastic and steel containers.
The jackets are easily fitted and removed using click-in buckles and straps, and can be handled safely even after use due to the outer insulation layers.
Standard adjustable dial thermostat ranges are upto 40 degrees C or upto 90 degrees C, with options upto 160 C and digital display of temperature.
Custom sizes can also be manufactured upon request.
Standard designs available for IBC's (Intermediate Bulk Containers) from most major manufacturers.
|
|
|
|
|
|
The THERMOSAFE Induction Drum Heater has been proven world wide over more than 20 years as the fastest, most reliable and safest method of melting solids from steel drums, and for the speedy heating of viscous liquids.
It is certified to the ATEX and IECEx standards for use in potentially explosive atmospheres, and is IP66 rated, so can be used in wet areas (even hosed down whilst operational!) and other harsh environments.
The external surfaces are high grade glass reinforced resins able to resist chemicals and acids, so the heater can withstand accidental splashes of hot liquids. There are no moving parts and it is completely maintenance free, so its lifetime operating costs are incredibly low.
No contact with the steel drum is required, as heat is generated by the drum wall itself, so it is exceptionally energy efficient, saving over 50% compared to conventional radiant heaters, and even more compared to steam ovens.
These units can be used individually, for example in research labs or small batch blending plants, or in groups at point of use, as highly cost effective replacements for large drum ovens.
|
|
DRUM HEATERS - for 200 litre barrels.
Drum Heaters facilitate the handling of solidified or viscous materials like adhesives, waxes, tar, chemicals, oils etc. They eliminate cumbersome methods and high investments, associated with steam and oil or fire wood heating.
Construction
Drum Heaters consist of a cylindrical metal cover carrying the flexible heating elements. A 2" thick thermal lagging of glass wool provides insulation and the metal casing makes for a rugged unit that can be wrapped snugly around the drum. The Drum Heater is hinged, and is mounted on castors for convenience. A base heater, also encapsulated in metal provides bottom heating. Control Panel incorporating thermostatic control is provided with the heaters.
|
|
|
|
see the results for the following category : 
