|
|
VACU
Lifting equipment for the safe, damage-free lifting of metal and plastic flat sheets/plates, etc. The operating and control components (the slide valve and gauge) are mounted near the handgrip for reasons of safety, so that after the vacuum beam has been switched on the operator can immediately check the system for efficient vacuum. An electronic monitoring unit is mounted according to safety requirements. The unit consists of a hanging suspension with main beam to which the adjustable cross beams are fixed. The suction cups, with ball and socket joints, are suspended from the beams with spring adjustment. The main and cross beams are hot galvanised. The hanging suspension is painted to RAL 1007 (Yellow). The unit will be delivered fully operational and complete with an electrical cable and 16A-CEE plug. The power supply can be offered to the Vacuum unit from an optional cable drum attached to the lifting unit.
|
|
VacuMaster Basic - comprehensive basic configuration.
- Vacuum lifting device with high degree of variability
- Pump size, operator-handle length, suction pads and main and cross beam lengths can be selected individually to match the specific application
- Main beam with integrated vacuum reservoir and distributor
- Ergonomical operator handle
- Electronic warning device, non-return valve
- Option: turning of workpiece by 90° or 180°
VacuMaster Comfort - the high-end configuration
- Basic configuration same as VacuMaster Basic
- Ergonomically integrated control, with push buttons, of "chain hoist up/down", "vacuum on/off" and, on models with turning function, "vertical/horizontal"
- Solenoid valve with two-hand operation for "vacuum off"
- Regulated vacuum pump with automatic energy-saving function
- Delivered complete with chain hoist
- Option: chain hoist with frequency-regulated drive
|
|
|
ANVER, a worldwide leader in vacuum material handling technology, offers a complete range of Vacuum Lifters and vacuum lifting equipment. Self-powered mechanical vacuum lifters, electric and air-powered vacuum lifters are all available in lifting capacities ranging up to 60,000 lb (26,600 kg) or more depending on your needs.
|
|
The OCTOPUS system has been designed in
response to the operational flexibility required by
palletising robotics and vacuum operated lifting systems in general.
Actually this system allows the handling of objects
with any shape and feature, provided that they have
a reasonable transpiration, without any need to
change or position a vacuum cup and also when
their surface only occupies 5% of the whole suction
plate. Of course the maximum weight of the load to
be lifted will be proportionate to the grip surface.
|
|
Kappa-Levator
The strong vacuum lifter for all surfaces : natural sones and porous material such as exposed aggregate concrte, autoclaved aerated concrete, kerb stones...
|
|
|
|
|
|
P1 & P2 Series • Channel Lifters
These modular vacuum lifters are expandable to meet a variety of materials handling needs. Interchangeable Lift Frames provide manual 180° rotation and 90° tilt. Pad Channels can be switched from one Lift Frame to another in minutes, for maximum versatility at the installation site. On-board DC power permits cord-free use of the vacuum lifter with cranes, forklifts or floor hoists. AC powered vacuum lifters are also available. When combined with the CB1 Counter-Balancer, double-channel vacuum lifters can be used to install windows and exterior surfacing materials under overhangs or in other low-clearance settings. Capacities to 1400 lbs [635 kg].
Wood's Powr-Grip makes vacuum lifters designed to handle:
• Windows, doors and modular construction panels
• Siding, exterior cladding and corrugated roofing
• Plastic sheets, laminates and injection-molded components
• Glass, Plexiglass®
• Stone and solid surfacing materials
• I-beam and sheet aluminum, steel and other metal stock
• Automotive windshields, side lites and back lites
• Auto and truck body panels, and machine enclosures
• Office furniture, appliances and much, much more!
|
|
|
|
|
|
MRT411LDC • Manual Rotator / Tilters
Delivering manual 360° rotation and 90° tilt from any rotated position, these Powr-Grip® vacuum lifters provide economy and versatility in the shop or at the installation site. Movable vacuum pads and extension arms create three configurations of the vacuum pads, for handling materials of nearly any size. Cord-free DC power allows operation of the vacuum lifters from cranes, forklifts or floor hoists. Capacities to 700 lbs [320 kg].
Wood's Powr-Grip has been setting the standard for vacuum lifting and mounting equipment since 1964. Our below-the-hook vacuum lifters are more versatile than magnets and faster than clamps or slings. A reliable, efficient and ergonomic means of handling materials, these AC, DC or air-powered vacuum lifters move heavy objects with the aid of forklifts, cranes or overhead hoists.
Your safety is our priority: That is why we individually test every vacuum lifter before it ships from our manufacturing facility, to make sure it functions properly and satisfies relevant safety and design standards, including those from ASME, CE and ISO 9001.
Wood's Powr-Grip makes vacuum lifters designed to handle:
• Windows, doors and modular construction panels
• Siding, exterior cladding and corrugated roofing
• Plastic sheets, laminates and injection-molded components
• Glass, Plexiglass®
• Stone and solid surfacing materials
• I-beam and sheet aluminum, steel and other metal stock
• Automotive windshields, side lites and back lites
• Auto and truck body panels, and machine enclosures
• Office furniture, appliances and much, much more!
|
|
|
|
|
|
PT10HV11AIR • Air-Powered Tilter 1500
The PT10HV11 Vacuum Lifter is designed to provide optimal support and effortless power tilting of stone and other high-density materials. Standard features include Foam Pad Rings, for sealing the vacuum lifter onto rough surfaces, and Individual Pad Shutoffs, for handling irregularly shaped materials. Available with compressed air, AC or DC power system. 1500 lbs [680 kg] capacity.
Wood's Powr-Grip has been setting the standard for vacuum lifting and mounting equipment since 1964. Our below-the-hook vacuum lifters are more versatile than magnets and faster than clamps or slings. A reliable, efficient and ergonomic means of handling materials, these AC, DC or air-powered vacuum lifters move heavy objects with the aid of forklifts, cranes or overhead hoists.
Your safety is our priority: That is why we individually test every vacuum lifter before it ships from our manufacturing facility, to make sure it functions properly and satisfies relevant safety and design standards, including those from ASME, CE and ISO 9001.
Wood's Powr-Grip makes vacuum lifters designed to handle:
• Windows, doors and modular construction panels
• Siding, exterior cladding and corrugated roofing
• Plastic sheets, laminates and injection-molded components
• Glass, Plexiglass®
• Stone and solid surfacing materials
• I-beam and sheet aluminum, steel and other metal stock
• Automotive windshields, side lites and back lites
• Auto and truck body panels, and machine enclosures
• Office furniture, appliances and much, much more!
|
|
MT8HV11 • Manual Tilter 1200
Specifically designed for handling stone and other high-density materials, Powr-Grip's MT Series Vacuum Lifters feature 90° tilt with an above-the-center pivot point, so that loads automatically hang in the upright position when lifted. Coupled with a remote power source, the resulting narrow profile allows these vacuum lifters to fit between tight, vertical storage racks while also protecting the power source from damage. Standard features include Foam Pad Rings, for sealing a vacuum lifter onto rough surfaces, and Individual Pad Shutoffs, for handling irregularly shaped materials. 1200 lbs [545 kg] capacity.
|
|
|
|
|
|
Below-the-Hook Vacuum Lifter
MRPT89AC • Manual Rotator / Power Tilter 1000
Used world-wide, the MRPT89AC Vacuum Lifter is Powr-Grip's most popular production line rotator / tilter, because it offers the greatest economy and versatility in a powered vacuum lifter. Attaching to materials in approximately 4 seconds, it supplies 360° continuous manual rotation with 90° powered tilt between upright and flat positions. The lightweight, interchangeable pad frame may be customized to meet customer specifications. 1000 lbs [455 kg] capacity.
Wood's Powr-Grip has been setting the standard for vacuum lifting and mounting equipment since 1964. Our below-the-hook vacuum lifters are more versatile than magnets and faster than clamps or slings. A reliable, efficient and ergonomic means of handling materials, these AC, DC or air-powered vacuum lifters move heavy objects with the aid of forklifts, cranes or overhead hoists.
Your safety is our priority: That is why we individually test every vacuum lifter before it ships from our manufacturing facility, to make sure it functions properly and satisfies relevant safety and design standards, including those from ASME, CE and ISO 9001.
Wood's Powr-Grip makes vacuum lifters designed to handle:
• Windows, doors and modular construction panels
• Siding, exterior cladding and corrugated roofing
• Plastic sheets, laminates and injection-molded components
• Glass, Plexiglass®
• Stone and solid surfacing materials
• I-beam and sheet aluminum, steel and other metal stock
• Automotive windshields, side lites and back lites
• Auto and truck body panels, and machine enclosures
• Office furniture, appliances and much, much more!
|
|
|
ANVER is the largest manufacturer of Vacuum Tube Lifting systems in the United States with the widest selection of Vacuum Tube Lifters and Replacement Vacuum Tube Lifter Parts in the industry. ANVER VT Vacuum Tube Lifting Systems can be configured to handle all load types: porous, semi-porous and non-porous. For porous and semi-porous load handling, we recommend you allow us the opportunity to test your load in order to determine the actual system capacity and capability. ANVER can provide an ergonomic vacuum tube lifting system for many special and customized lifting applications, a few examples of which are shown on our website.
|
|
VacuEasylift is a manual vacuum lifter, manufactured by TAWI, which handles almost all types of loads. There are models for lifting sacks and boxes, sheet wood and metal, panels and much more. The extremely smooth and quick operation is accomplished by using the same handle to lift, lower and release the load and by using the vacuum to hold and lift the load. Based on a unique concept, VacuEasylift has been developed into a versatile system for simpler, safer and more effective lifting.
Sack lifter
Lifting sacks manually is extremely heavy and our sack lifter is very often used to avoid this type of manual work. VM160 lifts sacks up to 60 kg which covers most sacks in processing today.
|
|
The vacuum tube lifter JumboFlex is ideal for the frequent and very rapid movement of lighter goods, i.e. those with a weight of up to 35 kg.
The modular Jumbo system can do almost anything: regardless of whether you want to stack boxes on pallets, load barrels on a truck, move cans, furniture bodies, rolls of film and foil - with the Jumbo, you always have the best solution. All transport operations can be carried out faster, more ergonomically and more safely with the Jumbo.
For anyone who has to lift objects, the Jumbo is an investment in good health, since it relieves the stress on the spine and joints.
|
|
Lifting, lowering, swivelling, loading and transporting loads is "child's play" with the vacuum-tube lifters.
The modular Jumbo system can do almost anything: regardless of whether you want to stack boxes on pallets, load barrels on a truck, stack metal or wooden sheets, move stones or furniture - with the Jumbo, you always have the best solution. All transport operations can be carried out faster, more ergonomically and more safely with the Jumbo.
For anyone who has to lift heavy objects, the Jumbo is an investment in good health, since it relieves the stress on the spine and joints.
|
|
Vacuum made to measure, perfectly controlled:
Reliable FIPA components: day or night, even for continuous production.
Vacuum lifting cylinders with strokes 5 mm – 50 mm
|
|
We have three different sizes with non-twisting piston rod for positionally accurate lifting of workpieces.
Uses of lifting cylinders:
Lifting and stacking a great variety of flat workpieces ( for example cardboard, veneer, wood, glass and metal sheets)
Separating sheets of paper and plastic foil
Removing parts from injection-molding dies
Printing, packaging and CD/DVD industries are preferable fields of application
Also we have two sizes without non-twisting feature. Lifting pistons with double slideways permit brief cycles times and good holding forces even in the case of lateral forces.
|
|
ANVER Vacuum Tube Lifters are easy to learn and simple to operate for loading and unloading cartons without manual lifting, bending, and stretching.
ANVER Vacuum Tube Lifters can be equipped with an extension handle that allows one person to unload and stack boxes without excessive reaching, stretching, or back strain. Models are offered to handle loads from 5 lb (2.3 kg) for non-porous loads, all the way up to 660 lb (300 kg).
|
|
| ... products without technical information |
| |
|
|
