|
|
|
Eastman cloth drills and marking machines work through numerous layers of fabric for simplified indication of buttonholes, darts, pockets, etc. Available in both hot and cold configurations, a variety of dills and awls, and a choice of tips.
|
|
Global Selfeeders are drill units designed and built to maintain high accuracy and high durability in the most demanding applications.
These units were developed on the forefront of holemaking technology in order to meet current requirements of high speed, high accuracy and lower cost for world-wide markets.
|
|
These drilling units provide spindle rotation and thrust operated by utilizing compressed air.
Pneumatically driven, this unit can be used without the need of electrical wiring.
|
|
E2 Drilling Units range from extremely compact pneumatic units to power packs with electrically-operated spindles and integrated hydraulic system.
Depicted above is E2's BE48-series of Electro-Pneumatic Drilling Units. Please check out E2's website (www.e2systems.com) for comprehensive information on the whole E2 product range.
E2 units are easy to install as well as use, and have functions such as quick advance, controlled working feed, multi-wall drilling and chip removal. Most are available with multi-spindle heads.
E2 drilling units can be found throughout the world wherever a high level of productivity and precision is vital. A long service life with excellent reliability and continued precision makes E2's drilling units a good investment.
|
|
Precision ground, pre-loaded, ball screw actuated quill feed on center line of spindle
.0001” Per revolution minimum feed rate, 500 IPM maximum
1,000 Pound thrust capacity
3 HP Max. spindle motor size
150mm (5.9”) stroke
10,000 RPM Maximum speed
Full CNC rigid tapping, left or right hand, and drapping cycles (combination drilling and tapping)
Programmed peck and multiple stage cycles
Spindle nose options including ABS, HSK, ASA, and ER single angle collets
Barrel foot mount, sub-base plate, and vertical column options
|
|
This very compact BE22-series of E2 drilling units comes in a wide range of speeds, with multi-spindle heads and a several different chuck alternatives.
It's sturdy designe secures a long life of precision drilling.
|
|
All pneumatic drilling unit in a stainless version for tough environments like Water Jet machines (starting hole when cutting soft materials).
This very compact drilling unit is naturally also offered in ordinary steel.
|
|
- BEM3 machining units are equipped with a 3-phase electric motor and can be used in single-purpose applications.
- Integrated pneumatic feed and hydraulic brake-cylinder assembly for rapid advance and feed control
- Standard electric limit switches.
- Rigid cast-Iron housing.
- Precision angular contact spindle bearings.
- Slim design. High performance to size ratio.
- Variable spindle speed combinations with interchangeable push-on pulleys. See speed selection table.
- The machining unit BEM3 has been designed for continuous operation of max. 18000 RPM with frequency converter.
|
|
These units are available in three sizes, LBL25, LBL35 and LBL45, each size covering a specific diameter range, totally up to 20 mm in steel. The basic units can be fitted with different chucks, twin heads for simultaneous drilling of two or more holes and attachments for chip removal and tapping.
Highly dependable units featuring quick and precise clamping, making them highly dependable. Easy to build into systems and have several holes drilled in a single operation since several of these compact units can be built together.
|
|
The CP comprehensive range of autofeed drills and tappers are suitable for single spindle operations to multi spindle processes.
Pneumatic and electric drives from 0.22 to 0.75kW (0.3 - 1.0hp) with thrusts from 320 to 1557N (72 - 350lbf)
AFDE200 - Drill/ Tapper - Electric drive/ Pneumatic feed
AFDE410 - Drill/ Tapper - Electric drive/ Pneumatic feed
AFDE610 - Drill/ Tapper - Electric drive/ Pneumatic feed
AFTE480 - Tapper - Electric Drive/ Leadscrew feed
AFD205 - Drill/ Tapper - Pneumatic drive/ feed
AFD215 - Drill/ Tapper - Pneumatic drive/ feed
AFD415 - Drill/ Tapper - Pneumatic drive/ feed
AFD625 - Drill/ Tapper - Pneumatic drive/ feed
|
|
|
In order to accomplish the complete processing of workpieces on a centre lathe, there are machines, whose acquisition is extremely complex very expensively and programming. Our proposal for solution aims there that with a relatively simple accessory equipment, which can be to a large extent completely finished worked on turned parts. This accessory equipment, briefly “MILLINGFIXED” mentioned, can both on conventional and cycle-steered centre lathes, simply post and/or. are rigged. To temporary storage facilities of turned parts, renewed rigging to a second machine, double expenditure of time, as well as high acquisition value are allotted. Complex programming and an impaired work space are omitted likewise by the employment “MILLINGFIXED”. We are convinced of the fact that this innovative solution will be for manufacturing and repair shops relating to crafts, as well as very useful for school and training in particular.
|
|
|
|
|
|
E2 products are known world wide for their quality, durability, precision and power. Each series of E2 units are the most compact in the market today.
E2 has a wide range of boring units widely used in all kinds of applications.
E2 customers benefit from the high quality of the E2 product line with less down-time and reduced operating costs. The compact design of the E2 units together with a good service of CAD-drawings/-models makes the design of the surrounding machine more convenient.
E2´s concern for the worker and his environment is evident in all E2 products. Low noise levels and non-lubrication features eliminating oil mist in the air is a common denominator for the E2 product line.
E2´s self feeding units utilizes a build in hydraulic feed control system. They combine precision with power enabling high precision also in multi-spindle head applications. The extremely compact Air hydraulic drilling units cover your need when drilling smaller holes. E2´s electro-pneumatic and - hydraulic units are to be used when more power is needed. You will still have the E2 durability and precision. The E2 product line also includes non-feed pneumatic units.
|
|
| ... products without technical information |
| |
For straightness measurement of bores and bearing journals, both in production and in the field. Very stable construction for highest measurement accuracy. Measures both open and closed bearing pockets with equal simplicity. Handles up to 150 measurement positions.
Typical applications: Crankshaft and camshaft bearings in diesel engines, bearing journals and hull penetrations in propeller shaft installations, workpiece positioning in machine tools.
|
|
Alignment of bores in diesel engines, compressors, pumps, gearboxes, stern tubes and turbines
Proper repair and reconditioning of combustion engines, compressors and pumps requires exact measurement of the alignment of crankshaft and camshaft bores, cylinder bores and crosshead guides. This is usually accomplished by optical or wire-based methods. CENTRALIGN Ultra is a precision laser alignment system designed to replace those older and more time-consuming technologies. It is much faster, very precise, and provides a clear measurement protocol.
|
|
|
As the market leader in precision measuring devices, Acu-Rite products have consistently set the standard of innovation for nearly 50 years. Proudly designed and manufactured in the USA, Acu-Rite products retain a tradition of superior quality and are preferred by machine tool builders worldwide.
|
|
ACU RITE RADIAL makes its radial drill still faster!
ACU RITE radial
Those, high performance position display for radial and high-speed radial drills, which can be served easily.
The collection of the machine motion is made by means of a ACU RITE length measuring system at the arm and - usually - by a friction wheel system at the column. With the help of a further measuring system at the guide also the drilling depth can be measured and indicated.
|
|
With an innovating style but serviceable integrated, BAYA compact is mainly very fonctional, robust, with a high capacity grab, with a high cutter force, breifly a very hight efficiency. BAYA compact has been designed to increase the mud circulation and to reduce the maintenance costs.
Powerful, compact, modular to comply with all the drilling need of diaphragm walls or barettes , BAYA compact can drill down to 70 m depth. BAYA compact is equipped with an incorporated chisel to cut the hard layers.
|
|
|
|
|
|
Baya is the 3rd generation of hydraulic grab and has been tested numerous times in order to improve the drilling rates, which are the best available on the market, today.
It combines the advantage of the pendular grab (versatility) with the Kelly system (performance and quality).
Use
Baya can be used to construct diaphragm walls or prefabricated walls, cut off diaphragm, oblong piles etc… Baya drills up to great depths, into a large range of grounds (silt to strong sandstone with Rc 100 bar). Clients use Baya where they used hydromill before.
Versatility
Its erection is quick, and so is its dismounting with its cardan system and its quick transport kit, which allows carrying the boom elements at the same time.
Baya has a large range of drilling widths from 19.7’’ to 59’’ and a large range of drilling lengths from 106.3’’ to 165.4’’, thanks to the fast interchangeable elements.
Performance
Thanks to its penetration coefficient and its closing force, Baya’s energy is the most powerful in the world, and allows drilling into harder grounds or drilling more quickly.
Thanks to its Kelly and motorised turning joint, Baya can go into the drilling trench very quickly or can empty its bucket above a truck very easily. Finally, the automatic half turn allows better verticality. Baya’s clamshells are all equipped with one chisel allowing better penetration into hard grounds.
Safety
The assembling systems of the different elements are simple and quick, assuring work with safety.
|
|
Within the family-operated Ditch Witch organization is the family of horizontal directional drilling (HDD) systems, designed and built by Ditch Witch engineers to work together with unbeatable efficiency. Components include the drilling rig, fluid management systems, the drill pipe itself, and integrated electronics that enable the tracker operator to disable power to the drilling unit's thrust and rotation. As families go, Ditch Witch HDD systems are the most functional in the underground construction industry.
COMPACT
Compact Ditch Witch directional drills are designed for easy setup and outstanding productivity in tight spaces.
MACH 1
Patented Mach 1 technology takes the guesswork-and the manual labor-out of pipeloading, drilling and other functions.
ALL TERRAIN
Patented Ditch Witch All Terrain technology is simply the most productive rock-drilling system available.
|
|
Track-mounted DH-DC1 (BTRK) 1 drill jumbo
The track-mounted DH-DC1 (BTRK 1) drill jumbo with telescopic drill boom is intended as a universal machine for high-performance drivages in medium section roadways. The crawler base also allows the machine to operate on steep gradients.
|
|
|
|
|
|
Futuro is the drilling rig with the best compromise of compactness / power / weight, in the world market.
Use
Futuro was specially designed for underpinning works (micropiles, (jet) grouting drilling, small soil investigations, water-well drilling, static compaction) with the classical drilling methods (destructive drilling, coring drilling, auger drilling, top hammer drilling, bottom hammer drilling).
Futuro can go through house doors of 29.7 inch wide, or can drill under 87 inch ceiling heights.
Versatility
Futuro can be equipped with masts for rods from 1 to 2 m long, with various rotation heads allowing drilling holes in many cases. Futuro can drill holes with 20° obliquity or drill vertically on the corner of the machine with lateral displacement of the mast.
Performance
Ground depending, Futuro can drill up to the following depths (indicative values) :
Bottom hammer :245 ft,
Destructive drilling : 165 ft,
Rock coring drilling : 82 to 195 ft (86 mm), or 265 ft (66 mm),
Auger drilling : 100 ft.
Safety
Futuro has been designed with the last safety technologies with the passive system of emergency stop. This system instantaneously stops all the moving functions of the machine (rotation, translation of the head, hammer), without voluntary human intervention. Futuro is also equipped with a portable control panel for the translation functions of the machine.
|
|
|
|
|
|
Galaxy was designed with the expertise of several soil investigation specialists. It is now the most complete, compact and powerful soil investigation drilling rig in the world, for the needs of the most demanding clients.
Use
Galaxy can do all types of soil investigation drilling : auger, conventional coring or with cable, destructive drilling with parameter recording, dynamic penetrometer, SPT etc…..
Versatility
With several inboard accessories, Galaxy can do all types of soil investigations on a job site. Galaxy can drill with water, with air, with top hammer, with bottom hammer, up to 650 ft deep. It can handle 6 m long rods.
Performance
The power, associated with several functionalities of the machine, allows obtaining drilling rates inaccessible until today.
Safety
Galaxy is equipped with an articulated complete control panel which is at the left of the machine, and with one portable control panel for the translation functions. Galaxy is equipped with passive emergency stops in order to instantaneously stop all the moving functions of the rig, without voluntary human intervention.
|
|
ImpactorHL-1800
Features:
- Compact machine
- Robust and reliable machine
- Low weight of 7000 kg
- High speed winch generates approx. 35 hits per minute
- Suitable for augering, hydraulic impact hammer and
displacement drilling as well
Advantages:
- Low ground pressure
- Working in low headroom area's (min. 2700 mm)
- High trade-in value
- 100% perfects piles
Benefits:
- Up to 50% increased productivity
- Up to 40% less labour costs
|
|
Track-mounted DH-DC2 (BTRK 2) drill jumbo
The track-mounted DH-DC2 (BTRK 2) drill jumbo with two telescopic drill booms is intended as a universal machine for high-performance drivages in medium to large-section roadways. The crawler base also allows the machine to operate on steep gradients.
|
|
|
|
|
|
Median is a powerful, robust, very complete hydraulic drilling rig with innovating kinematics, alone in the world, patented with an intuitive approach.
Median is able to drill in all positions for the most demanding clients.
Use
Median can drill all work types : tunnels, anchors, ground nails, water-well drilling, micro-piles etc… Median can drill with all method types : bottom hammers, top hammers, rollers, coring, augers, up to 500 ft deep, in all azimuth.
Versatility
Its kinematics makes the rig very versatile, and the erection on a hole is very easy and quick. Median can be equipped with an inboard injection pump to obtain better performance, and with an articulated boom to put rods on the drilling axle. A diesel-electrical unit allows working in tunnels with very minimal pollution.
Performance
Median can be in position above a hole to drill, 3 times quicker than a conventional articulated rig. So it increases the industrial drilling rate a lot. Rotation heads are powerful to drill all types of ground.
Safety
Median is equipped with an articulated control panel which can be at the left or at the right, and with one portable control panel for the translation functions. Median is equipped with passive emergency stops in order to instantaneously stop all the moving functions of the rig, without voluntary human intervention.
|
|
Drilling equipment
deilmann-haniel mining systems drill jumbos and drilling equipment are the result of a decade-long , world wide employment in underground mining, tunnelling and gallery construction.
The range of drilling equipment comprises drill jumbos for blasthole drilling, mechanized rockbolting and extension drilling as well as long-hole drilling machines designed for mine-gas drainage and strata exploration activities.
Furthermore deilmann-haniel mining systems designs and constructs special drilling machines and systems for mounting on tunnel boring machines and roadheaders.
The modular design of the drilling equipment and components allows perfect adaptation to specialized drilling applications and greatly simplifies assembly and maintenance work.
Rugged, durable and cost-effective deilmann-haniel mining systems drilling machines have been tried and tested around the world under the toughest operating conditions.
|
|
|
|
see the results for the following category : 
